RENEWAL/REPLACEMENT OF CEILING FAN, EXHAUST FAN , VOLTAGE STABILIZER AGAINST BER AND SPECIAL REPAIR/REPLACEMENT OF CONVENTIONAL FTL/HPSV LIGHT FITTINGS WITH LED FITTINGS AND CERTAIN OTHER MW AT NAA UNDER GE (NORTH) TEZPUR

Amount

Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.

S & F Ceiling Fan AC single phase 230V,50 Hz of size 1200mm sweep, 380RPM, Air delivery 230 m3/min, non decorative ceiling fans of white colour complete incl , stepped type electronic fan regulator, down rod with necessary fixing accessories, providing three core, flexible copper conductor wire of size 23/0.0076 from ceiling rose to fan complete all as specified and as directed. Model: 1200mm sweep, 380RPM Striker of make USHA or Equivalent in bajaj/CG. Note: 02 (Two)-year warranty certificate from manufactuer must be provided by the contractor.

S & F Ceiling Fan AC single phase 230V,50 Hz of size 1400mm sweep, 380RPM, Air delivery 230 m3/min, non decorative ceiling fans of white colour complete incl , stepped type electronic fan regulator, down rod with necessary fixing accessories, providing three core, flexible copper conductor wire of size 23/0.0076 from ceiling rose to fan complete all as specified and as directed. Model: 1400mm sweep, 380RPM Striker of make USHA or Equivalent in bajaj/CG. Note: 02 (Two)-year warranty certificate must be provided by the contractor.

Supply & Fix Anti dust, light duty Exhaust Fan 230mm sweep, 900RPM, with metal blade and louver complete fixed in wall with fastener nut of suitable size complete all as specified and directed. Model: Aeroclean LD DBB of Make Usha or Equivalent in bajaj/CG.

Supply & Fix Anti dust, heavy duty Exhaust Fan 300mm sweep, 900RPM, with metal blade and louver complete fixed in wall with fastener nut of suitable size complete all as specified and directed. Model: 300MM S.PH TURBO HDEF 900RPM ISI of Make Usha or Equivalent in bajaj/CG.

Supply & Fix Anti dust, heavy duty Exhaust Fan 380mm sweep, 900RPM, with metal blade and louver complete fixed in wall with fastener nut of suitable size complete all as specified and directed. Model: 380MM S.PH TURBO HDEF 900RPM ISI of Make Usha or Equivalent in bajaj/CG.

Supply & Fix Anti dust, heavy duty Exhaust Fan 450mm sweep, 900RPM, with metal blade and louver complete fixed in wall with fastener nut of suitable size complete all as specified and directed. Model: 450MM S.PH TURBO HDEF 900RPM ISI of Make Usha or Equivalent in bajaj/CG .

Supply and fix Wall mounted Voltage stablizer 2.0 KVA for automatic operation single phase naturally air cooled indoor type, capacity of 6 Amp & designed for input varation between 90-300 Volts with accuracy of (+)/(-) 2.5% complete all as specified and directed. Model: VGMW 200 PLUS of Make V-Guard. Note: 02 (Two)-year warranty certificate must be provided by the contractor.

Supply and fix Wall mounted Voltage stablizer 3.0 KVA for automatic operation single phase naturally air cooled indoor type, capacity of 9 Amp & designed for input varation between 90-300 Volts with accuracy of (+)/(-) 2.5% complete all as specified and directed. Model: VGMW 300 PLUS of Make V-Guard. Note: 02 (Two)-year warranty certificate must be provided by the contractor.

Supply and fix Wall mounted Voltage stablizer 4.0 KVA for automatic operation single phase naturally air cooled indoor type, capacity of 12 Amp & designed for input varation between 130-300 Volts with accuracy of (+)/(-) 2.5% complete all as specified and directed. Model: VGX 400 of Make V-Guard Note: 03 (Three)-year warranty certificate must be provided by the contractor.

Supply and fix Wall mounted Voltage stablizer 5.0 KVA for automatic operation single phase naturally air cooled indoor type, capacity of 15 Amp & designed for input varation between 90-300 Volts with accuracy of (+)/(-) 2.5% complete all as specified and directed. Model: VEW 500 PLUS of Make V-Guard Note: 03 (Three)-year warranty certificate must be provided by the contractor.

Supply and fix Energy saving and environment friendly long life LED street light made up of pressure die cast aluminium with high power LED 36 W as lighting source and lens embeded PC cover having IP 66 protection and impact resistance of IK 07 with 10KV Built-in surge protective device with following technical specification efficacy >100 lm/W , CCT> 5400K, PF =0.95 and having THD < 10%. Note :- 3 years warranty certificate from the manufacturers shall be submitted.

Supply and fix Energy saving and environment friendly long life LED street light made up of pressure die cast aluminium with high power LED 30 W as lighting source and lens embeded PC cover having IP 66 protection and impact resistance of IK 07 with 10KV Built-in surge protective device with following technical specification efficacy >100 lm/W , CCT> 5400K, PF =0.95 and having THD < 10% including its connection with 3 core 1.5sqmm standed PVC insulated and PVC sheathed Al conductor wire from jucntion box to street light fitting all as specified Note :- 3 years warranty certificate from the manufacturers shall be submitted.

Material and labour Thermoplastic Cable Junction Boxes IP66/67 "weather proof" , for outdoor installation with knockouts for cable entry for streetlight with terminals suitable for 10-16sqmm cable of Size 155 X 210 X 92 mm incl aluninium busbar and MCB SP 6 amps 1 No, for street light, including necessary clamps for fixing with street light pole, and connecting all incoming and outgoing cables with AL lugs of appropiate sizes and complete all as specified and directed by Engr-in-Charge. Make Cat No. KF1616G of Hensel or euivalent in syntex.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 mtrs long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including necessary earth work, excavation, PCC 1:4:8 type D-2 in base (60 x60x10cm) and foundation (50 x50x140 cm) and coping (50x50x30 cm) with 1:3:6 type C-1 including formwork upto 30cm above ground level incl numbering of all poles all as directed. Note : All pole shall be provided with two coats of Black Bituminous paint from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Paint over a coat of Primer (Externally from Top of Coping), black and white coloured painted strip in layers as directed by Engr-in-charge upto 1.5m high above coping level and numbering of poles

Supply and fix street light bracket made out of 32mm dia GI pipe medium grade 120 cm long cut to size and bend to shape, fixing on poles with flat iron clamps 40mm x 6mm -02 sets including nuts, bolts and washers including preparation of surface and applying one coat of alluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles/walls, XLPE insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm, 4 core complete all as specified and directed. Note : Excavation and earth work will be measured and paid seperately.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Removing excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable in trenches for protection of cables and punned down to a thickness of 180mm for measurement and payment complete all as specified and directed.

Supply and laying in trenches brick common burnt clay, sub class 'B' designated- 75 laid width wise equal to length of cable for protection complete

M&L for 32 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

S&F Galvanised Iron Pipe 40mm bore (dia), Light grade for protection of UG Cable, complete all as specified and as directed.

Supply and fixing Timelite Distribution Boards for automatic Switching of street lights suitable for 32Amps,3 Pole 230 volt fited with ASTRONOMICAL time switch 24 hrs operation,3 pole contactor,and TPN MCB.All as per cat no TL032ASO of make Indo Asian or equivalent make of L&T/Schneider/Legrand including fixing with MS Clamp 40X5 mm to steel/RCC poles incl connection complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I connected to earth test point all as specified including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 12mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion, complete all as specified and directed.

Dismantaling & Taking down unserviceable street light fittings HPSV/FTL fittings from pole for replacement of old type unserviceable fittings complete all as specified and as directed.

Taking down LT UG Cables of any size from trenches/poles complete after disconnection all as specified and directed.

Supply and fixing AC single phase static energy meter of accuracy class 1.0, 240V, 50Hz with Backlit LCD display of rating 10-60A, with optical port + Box (measures and display KWH, V, Current I, KW, PF last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with polycabonate transparent hinge type meter box temper proof, complete all as specified and directed. Cat No : SPPB1520110002OC00 of make HPL or equivalent in secure.

M&L for submain wiring with two run of 4 sq mm FRLSH PVC insulated stranded copper conductor cable 1100 volts grade drawn through and including PVC casing and capping of suitable size with all fittings and accessories including one run of 4 sq mm FRLSH PVC insulated solid copper cable for earth continuity and connected to common earth dolly complete all as specified and directed.

M&L Tubes, `Medium grade' galvanised, with all fitting and fixed complete in trench/ walls and ceilings or laid in floors of following sizes:-

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

M&L for Gun-metal, globe or gate valves of size 25 mm, with iron wheel head, screwed both end for iron pipe and fixed all as specified and directed.

M&L for Gun-metal, globe or gate valves of size 20 mm, with iron wheel head, screwed both end for iron pipe and fixed all as specified and directed.

S&F Float valve (Ball valve) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed all as directed

M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 25mm.

Supply and fix refrigerator, electric driven (single phase 50 Hz) capacity 310 litres frost free double door, 3 star BEE rated complete all as specified and as directed

M & L for providing Point wiring with 2.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade single core conforming to IS 694:1990 and one run of continuous earth wire with 2.5 sqmm stranded core PVC insulated unsheathed copper conductor drawn in and including rigid PVC surgace casing 'N' caping not less than 2mm wide doule lock type to be fixed with the help of rawal plugs & screws including neccesary fittings and fixtures and including PVC terminal box and PVC board making good disturbed surface with CM 1:4 to match with the existing surface for 3 pin 15 Amps switch socket combination on independent board with 2.5mm copper cable

M & L for providing Point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade single core conforming to IS 694:1990 and one run of continuous earth wire with 1.5 sqmm stranded core PVC insulated unsheathed copper conductor drawn in and including rigid PVC surgace casing 'N' caping not less than 2mm wide doule lock type to be fixed with the help of rawal plugs & screws including neccesary fittings and fixtures and including PVC terminal box and PVC board making good disturbed surface with CM 1:4 to match with the existing surface for one light/fan/exhaust fan controlled by one, one way switch with cable 1.5sqmm

Supply & fixing switch piano, flush type, and 5/6 amps, 240 volts, single pole, one way complete all as specified and directed

S&F ceiling rose surface backelite polycarbonate type two to three terminals complete all as specified

S&F sheet metal single door enclosure MCB DBs SPN 4 way 240 V, complete flush mounted complete all as specifed and direcetd.

M&L for isolator/MCB single pole 5 to 40 Amps, 240V complete all as specifed and direcetd.

M&L for isolator/MCB SPN 32 Amps, 240V complete all as specifed and direcetd.

M&L for submain wiring with two run of 6 sq mm FRLSH PVC insulated stranded copper conductor cable 1100 volts grade drawn through and including PVC casing and capping of suitable size with all fittings and accessories including one run of 6 sq mm FRLSH PVC insulated solid copper cable for earth continuity and connected to common earth dolly complete all as specified and directed.

S&F in relacement of Recess/surface mounted 2' x 2' LED flat light 36W luminaire with comfortable glare free soft illimination not less than 5700K complete all as specified and as directed

S&F 15mm dia Bib taps, cast copper ally with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule/PPR pipe and fixed, fancy type chromium plated

M&L for 1000 ltr rotational mouled polyethylene water storage tanks, 3 layer ISI marked (cylinderical vertical with closed top) hoisted and fixed in position all as specified and as directed

M&L for horizontal boring of roads upto 100mm pipes by manual method complete all as specified

M&L for mild steel compund girders and stanchions, staging for PVC water tabk etc built up from two or more beam channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc and grade of steel Fe-410-0 including with two coats of synthetic enamel over a coat of red oxide primer on exposed surfaces with two coats of black biyuminius paint over a coat of primer inside complete all as specified and as directed

M&L for cement concrete in foundation, fillin and mass concrete type B2 1:2:4 (using 20mm graded aggregate) for making good the road cutting areas and installations hard surface

Supply, fixing & testing Booster pressure pump with pressure tank 24 ltr and motor capacity 01 HP complete electric driven 220V, single phase suitable for suction and delivery 25x25mm dia GI pipe having discharge capacity 2000LPH at 50 mtr head all as specified and directed. Make KSB model no KHM0-404 or equivalent in CG/Kirloskar

Supply, install, testing and commissioning centrifugal pump set model 1 DB 100/32 coupled to 20HP Cap, electric driven, three phase, 1440 RPM having discharge capacity 2100LPM at 30 mtr head including necessary foundation/stage nuts bolts etc complete all as specified and as directed. Make : Kirloskar/KSB/CG

Supply, install, connection ,testing of storage type Electric Geyser (water heater) of capacity 50ltr horizontal type with high density insulation including four numbers fasterner bolt with nuts and washers complete all as specified and as directed. Make : Jaquar model no Monza DX or equivalent in approved makes

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 10 KA 'C' Curve complete all as specifed and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified

M&L for cutting/inserting tees etc for making branch connection complete all as specified and directed

MAHANTA ENTERPRISES

PURBANCHAL BUILDERS