Renovation of Training Centre at Bharuch Circle Office.

Name of Work : Renovation of Training Center @ Bharuch CO

Sr. No. Description Qty Unit Basic Rate

1 Dismantling wood work, wrought framed and fixed in frames 5 SMT 1,694.70

trusses including stacking the materials with all lead and lift.

2 Demolition of Brick work and stone masonry including stacking of 10 CMT 530.78

serviceable materilas and disposal of unserviceable materials

with all lead and lift.(ii) In Cement Mortar

3 Providing and fixing 60 mm thick Wooden Partitions with 110 SMT 5,550.00

combination of wood and 12 mm toughened glass as per

requirement. Partition shall have teakwood framing of 12 mm

waterproof ply of Greenply,Archidply or equivalent on both sides

of partition. 60 mm polished teakwood bidding patti to be used to

fix the glass. Ply shall have grooves of size, shape & pattern as

per requirement & shall be finished with approved laminate of

mm thick. The rate shall include the cost of all materials,labours

etc complete as specified in the item and approved by the EIC.

4 Providing and fixing Wooden file storage wall mounted/floor 25 SMT 8,000.00

mounted with openable shutters incl. all necessary joints, 01 mm

th. SF finish laminate , teak wood lipping, SS concealed handle,

sliding lock & necessary hardware materials etc .All inside and

outside ply shall be made of commercial plywood 18mm thick

and covered with 1mm thick SF laminate as per selection of EIC

however work should be executed as per instruction of EIC.

Details of Wooden file storage: Each storage will be treated as

single unit with 6 sides i.e. front(single/double shutters), Back,

left, right, top and bottom. Each shutter must be fixed on one of

two vertical sides which should not be more than 500mm width.

The depth/breadth of cupboard shall not be more than 500mm for

each storage Height of each cupboard shall not be more than

1200mm, each cupboard shall have to be provide with 02 handle

of SS, 04 magnets, 02 chain, 01 door stopper of SS and 01 lock.

Measurement will be taken only for front side

5 Brick work using common burnt clay building bricks having 8 CMT 4,831.20

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(C) Fly Ash

6 Providing and fixing window having extruded aluminum Colour 15 SMT 1,696.73

anodized section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size

Kg/mt with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

7 Providing and fixing 35 mm thick shutters for Doors, windows and 32 SMT 5,285.45

clerestory windows including Indian teak wood frames 10 cm x

cm. size including anodized alluminium fixtures and fastenings

including primer coat of approved quality and two coats of oil

painting etc, complete. (ii) Fully Panelled.

8 Providing corrugated G.I. sheet of class-3 roofing fixed with 380 SMT 719.93

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

9 Steel work, welded in built up sections framed work including 7850 Kg 89.58

cutting, hoisting, fixing in position and applying a priming coat of

read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters

and the like (upto 10 ton)

10 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in 225 SMT 1,062.50

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

11 Providing and fixing Alluminium Composite Pannel 4 mm thick 165 SMT 720.34

as per directive of EIC

12 Providing and fixing eco-friendly light weight calcium silicate false 380 SMT 1,632.63

ceiling tiles having Tegular edge & 15 mm Thick Densified edges

on the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance

and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal

level suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size

24X28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm centre to

centre to form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with

the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid

including, cutting /making opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc., wherever

13 Providing and fixing podium of 12 mm ply with walnut finish or 5 SMT 5,500.00

other approved shade sunmica on all sides and as per directive

14 Providing and fixing wall fixed Pre Fabricated Table 1.2 m x 0.6 10 Nos 7,500.00

m x 0.75 m of 12 mm ply with walnut finish sunmica or other

approved shade on all sides and as per directive of EIC

15 Providing and fixing WPC panel of approved colour 17-25 mm 30 SMT 1,200.00

thick prefarably of dark brown colour or colour approved by EIC

16 providing and Fixing DGVCL logo of Rose metal of size 130 sq 1 Nos 18,000.00

inch and DGVCL written Below of size of size 45 sq inch

17 Double layer Roller Blinds 25 Smt 2,200.00

Providing and installing Zebra double layer roller blind Polyester

corded including all fixtures.

18 Providing and fixing door closure, cylindrical door lock & Door 12 Nos 2,468.00

19 Removing dry or oil bound distemper by a washing and scraping 455 Smt 10.88

and sand papering the wall surface smooth including necessary

repairs to scratches complete.

20 Providing 15mm thick cement plaster in single coat on Rough 380 Smt 185.85

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

21 20mm thick sand faced cement plaster on walls upto height 10 245 Smt 326.03

metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1-sand) etc. complete.

22 Wall painting (two coats) with plastic manufacture on 380 Smt 78.12

undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

23 Finishing wall with weather proof exterior emulsion paint on wall 245 Smt 113.40

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete.

24 Providing and laying granite slab 18mm thick in 35 Smt 3,261.00

skirting,dedo,risers of steps & landing laid on bed of 10 mm

thick(Average) base of C.M. 1:4

25 Providing and fixing H.D.P.E ( SINTEX ) single wall construction 20000 Liter 5.10

one piece moulded cylindrical vertical with closed top/lid PVC

water storage tank of required capacity on any floor of approved

brand(sintex or equivalent) includig providing and fixing 40 mm

dia G.I pipe connection for inlet, outlet,overflo

26 Providing and fixing UPVC pipes, having thermal stability for hot 50 RMT 282.00

and cold water supply including all UPVC plain and brass

threaded fittings including fixing the pipe with clamps at 1m

spacing. This includes jointing of pipes and fittings with one step

UPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per

direction of engineer in charge. 40 mm

27 Providing and fixing CONCELAED UPVC pipes, having thermal 75 RMT 184.00

stability for hot and cold water supply including all UPVC plain

and brass threaded fittings including fixing the pipe with clamps

at 1m spacing. This includes jointing of pipes and fittings with

one step UPVC solvent cement and the cost of cutting chases and

making good the same including testing of joints complete as per

direction of engineer in charge. 25 mm

28 Providing and fixing CONCELAED UPVC pipes, having thermal 25 RMT 187.00

stability for hot and cold water supply including all UPVC plain

and brass threaded fittings including fixing the pipe with clamps

at 1m spacing. This includes jointing of pipes and fittings with

one step UPVC solvent cement and the cost of cutting chases and

making good the same including testing of joints complete as per

direction of engineer in charge. 15 mm

29 Providing and fixing in position European style water closet 4 Nos 14,322.00

(EWC) (HINDWARE - ESSENCE) make consisting

30 Providing and fixing Flat back long pattern urinal of 4 Nos 12,705.00

approved quality(Dyna-Hindware)

31 Providing & fixing white color flats vitreous China "Wash basin" of 3 Nos 9,570.00

approved quality(Amazon-SW-Hindware)

32 Providing & fixing pillar taps of approved quality(Jaquar cat no 12 Nos 4,851.00

5001) with capstan head screw down high screws, shanks & back

33 Providing and fixing 600mm x 450mm bevelled edge mirrror of 3 Nos 825.48

superior glass mounted on 6mm thick A.C. sheet or plywood

sheet and fixing to wooden pluge with C.P. brass screws and

34 Providing and fixing soap dispenser of approved quality 3 Nos 250.00

35 Point Wiring of indivisual plug with 2-1.5 sq. mm. & earth wire of 80 Nos. 445.00

1.5 sq.mm (green) both are of ISI marked 1.1 kv grade FRLS

PVC insulated multi strand copper wire in following type of pipe

to be erected concealed in/on wall/ceiling complete with 6A

modular type switch & 5 pin plug erected and accesaries and

earth continuty of following type erected on PVC/metalic box

single mounting base frame covered with textured/metalic front

plate modules errected on wall/ ceiling as per pipe erected with

necessary lamp holder/ ceiling rose/HD connector as directed

with medium type rigid PVC pipe and accesaries. Cat III

(Jambusar T. s.dn. rate)

36 For 16 A plug with 2-4 sq. mm cu wire as directed with medium 50 Pt. 790.00

type rigid PVC pipe and accesaries. Cat III (Jambusar T. s.dn.

37 Point Wiring of looped plug with 2-1.5 sq. mm. & earth wire of 50 Pt. 240.00

1.5 sq.mm (green) both are of ISI marked 1.1 kv grade FRLS

PVC insulated multi strand copper wire in following type of pipe

to be erected concealed in/on wall/ceiling complete with 6A

modular type switch & 5 pin socket plug erected and accesaries

and earth continuty of following type erected on PVC/metalic box

single mounting base frame covered with textured/metalic front

plate modules errected on wall/ ceiling as per pipe erected with

medium type rigid PVC pipe and accesaries. Cat III (Jambusar

38 Point Wiring of Two way controled light point with 2-1.5 sq. mm. 10 Pt. 530.00

& earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multi strand copper wire in following

type of pipe to be erected concealed in/on wall/ceiling complete

with 6A modular type switch & 5 pin socket plug erected and

accesaries and earth continuty of following type erected on

PVC/metalic box single mounting base frame covered with

textured/metalic front plate modules errected on wall/ ceiling as

per pipe erected with medium type rigid PVC pipe and

accesaries. Cat III (Jambusar T. s.dn. rate)

39 Mains with 1.1 kv grade FRLS PVC insulated ISI marked strand 100 Mtr 60.00

copper conductor wire in following type of pipe to be erected

concealed in following type of pipe to be erected concealed in

flushed /on wall/ceiling with 1.5 sq. mm copper conductor FRLS

PVC insulated strand wire of green colour for earth continuty of

following size . with medium type rigid PVC pipe and

accesaries. 2 wire 1.5 sq.mm (Jambusar T. s.dn. rate)

40 Mains with 1.1 kv grade FRLS PVC insulated ISI marked strand 150 Mtr 80.00

copper conductor wire in following type of pipe to be erected

concealed in following type of pipe to be erected concealed in

flushed /on wall/ceiling with 1.5 sq. mm copper conductor FRLS

PVC insulated strand wire of green colour for earth continuty of

following size . with medium type rigid PVC pipe and

accesaries. 2 wire 2.5 sq.mm (Jambusar T. s.dn. rate)

41 Mains with 1.1 kv grade FRLS PVC insulated ISI marked strand 150 Mtr 110.00

copper conductor wire in following type of pipe to be erected

concealed in following type of pipe to be erected concealed in

flushed /on wall/ceiling with 1.5 sq. mm copper conductor FRLS

PVC insulated strand wire of green colour for earth continuty of

following size . with medium type rigid PVC pipe and

accesaries. 2 wire 4 sq.mm (Jambusar T. s.dn. rate)

42 Mains with 1.1 kv grade FRLS PVC insulated ISI marked strand 75 Mtr 145.00

copper conductor wire in following type of pipe to be erected

concealed in following type of pipe to be erected concealed in

flushed /on wall/ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated strand wire of green colour for earth continuty of

following size . with medium type rigid PVC pipe and

accesaries. 2 wire 6 sq.mm (Jambusar T. s.dn. rate)

43 Providing and errecting following shockproof tissino type 25 Each 20.00

accesaries erected on 3 mm thick PC (Poly carbonaate) sheet in

PVC/Metal Box errected on wall/ceiling Bakelite Lamp holder

(Jambusar T. s.dn. rate)

44 Bakelite adopter for holder to be erected (Jambusar T. s.dn. 60 Each 8.00

45 Supplying and erecting 19/20mm nominal bore medium class 50 Nos. 125.00

M.S. pipe down rod erected duly painted for ceiling fan complete

with 24/0.2,3 core flexible wire with earthing.0.75 mtr (Jambusar

46 Supplying and erecting fan hook box of 10 mm M.S. round bar 40 Nos. 125.00

bounded to the RCC bars up to 50 mm length each side and

pierced through a 16 guage M.S.Box/ Heavy duty PVC box

complete erected concealied in ceiling with necessary finishing.

(Jambusar T. s.dn. rate)

47 Providing 2.5 mm thick laminated sheet to cover the fan hook or 40 Each 20.00

fan box (Jambusar T. s.dn. rate)

48 Providing and errecting sheet steel powder coated MCB 3 Each 2,960.00

Distrution board -flush/surface mounted fited with bus bar, neutral

link, earth bar and DIN rail confirming to IS 13032 and BS 5486-

1986 without MCB to house appropriate nos. of MCBs. the DBs

should be used of same company of MCB to be used. Three

phase 8 way SS Double Door for horizontal single phase

outgoing.(Jambusar T. s.dn. rate)

49 Supplying and erecting approved make RCCB+MCB( electro 5 Each 2,920.00

magnetic type only ) working on residual current device having

KA short circuit breaking capacity and 30 mAmp . sensityvity &

30mili sec. tripping time confirming to IS 12640 test knob facility

trip free mechanism operating for rated leakage at normal ten volt

complete erected including all materials lugs , screws etc

completed (e) 32A/40A, 2 pole single Phase Cat III as incomer.

(Jambusar T. s.dn. rate)

50 Miniature circuit breaker single pole 6A to 32 A suitable to 10 Each 115.00

operate on 240VA.C. system and having overload and short

circuit tripping elements and breaking capacity 10KA to be

erected in existing M.S. Box confirming to IS 8828/1996 with IS

mark etc completed Cat III (Jambusar T. s.dn. rate)

51 Supplying and erecting in earth pit of minimum bore dia 225 mm 1 Nos. 9,100.00

size Ash or approved make Safe earthing electrode consisting

pipe in pipe technology as per IS 3043-1987 made of corosion

free G.I. pipe having outer pipe dia 80 mm having 80-200 micron

galvanising , inner pipe dia 40 mm having 200-250 micron

galvanising connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications (A)

for electrical installation upto 440V, length of pipe -1 mtr.

backfilling compound -1 nos. of bag of 15 kgs. (Jambusar T. s.dn.

52 Providing one bag of 25 kg additional backfilling compound 1 Each 1,100.00

(BFC) suitable for safe earthing device. (Jambusar T. s.dn. rate)

53 15 watt LED Ceiling light in PoP 90 No 1,100.00

54 2 foot x 2 foot LED Light fixed in ceiling 15 No 3,200.00

55 Providing & Fixing of decorative/traditional ceiling fan of 40 No 2,750.00

crompton/havells/anchor/bajaj 1200 mm size inlcuding copper

flexible cord of suitable & apprroved size from ceiling rose upto

fan terminals and fixing of regulators [ Make shall be approved

by Engineer in Charge]

56 5 step regulator/dimmer for ceiling fan 40 No 265.00

57 Supply and installation of 2.0 ton 5 star AC of 4 Nos 70,000.00

Voltas/Daikin/Lyod/Blue Star/Carrier

58 Misc. work/Unforseen work if required to be carried out during 1 Job 3,50,000.00

execution of the work which are essential and required at stage

of working such as Electrical work,Furniture work, Landscaping

work, Plumbing work, False ceiling work, colour work and misc.

civil work as per instruction of Engineer in charge.

Total Amount(Excluding GST)

Total Amount(Excluding GST)