SPL REPAIR TO BUILDING AND CERTAIN EM REPAIR AT BINNAGURI MIL STN UNDER GE SOUTH BINNAGURI

Amount

Schedule 'A'

Excavation in trenches n exc 1.5 mtr wide and n.exc 1.5 mtr deep for pipe line in any type of soil, getting out and leveling of bottom surface to required level complete all as specified and as directed.

Returning filling in , including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Removing excavated material from site to a distance not exc 50 mtr away and depositing where directed not exc 1.5 mtr from the starting point complete all as specified and as directed.

Taking up cast iron water main including all fitting with spigot socket ends and lead/tyton joints including burning out lead joints and recovering lead of the following size of pipe for reuse as directed for the following sizes of pipes complete all as specified and as directed. (a) 150mm bore

(b) 100mm bore

S&F for Ductile Iron pipes with spigot and socket ends ,Rubber gas kit as per IS- 8329,internal lining with cement mortor class K-7 in any length laid in trenches complete all as specified and as directed. (a) Nominal dia 150mm

(b) Nominal dia 100mm complete all as specified and as directed.

S & F DI pipe fitting such as bend, reducer , socket, Tee etc of various size complete all as specified and as directed.

Supply and fix CI sluice valve Cast iron PN-1.6 flanged end conforming to IS -14846 with CI wheel, brass spindle, chuck nuts, rubber gasket, bolts (full threaded), nuts & washers including joints for the following sizes complete all as specified and directed including dismantling and taking down of old unserviceable CI Sluice valve from existing position complete all as specified and as directed. (a) 150mm dia

(b) 100mm dia complete all as specified and as directed.

Supply and fix lever operated Wafer butterfly valve IS-13095 ,PN-1.6, single disc type with complete accessories such as rubber gasket, bolts (full threaded), nuts & washers including joints for the following sizes complete all as specified and as directed. (a) Nominal dia 150mm

Dismantling existing unserviceable valve pits and construction of new brick masonry valve pits of size 1200x1200x1200mm (internal dimension) with brick work in cement mortar (1:4) 40mmx40mm x6 mm angle iron frame ,MS handle 300mm long, bent to shape and riveted to MS sheet including excavation and earth work, concrete work 3.15 mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete all as specified and as directed.

All as per item No 12.00 here-in-above but of size 900x900x900mm (internal dimension) complete all as specified and as directed.

M&L for providing cement concrete type D2(1:4:8) using 40 mm graded stone aggregate in foundation of pole for supporting of pipe line complete all as specified and as directed.

Supply and fix in replacement roller assembly suitable for chlorine dosing pump (packet of 04) complete all as specified and as directed.

Supply and fix in replacement injection check valve suitable for chlorine dosing pump (packet of 05) complete all as specified and as directed.

Supply and fix in replacement suction line strainer 3/8" suitable for chlorine dosing pump complete all as specified and as directed.

Supply and fix in replacement pump tube suitable for chlorine dosing pump (packet of 05) complete all as specified and as directed.

Supply and fix in replacement suction / discharge tubing 3/8" suitable for chlorine dosing pump complete all as specified and as directed.

Supply and fix in replacement check valve duckbill only suitable for chlorine dosing pump (packet of 05) complete all as specified and as directed.

Supply and fix in replacement connecting nut 3/8" with adopter suitable for chlorine dosing pump (packet of 05) complete all as specified and as directed.

Supply, installation, testing and commissioning in replacement of granular chlorine dosing pump high pressure single head gear motorised adjustable type with non metallic liquid end including tubing, connecting nut, injection check valve and ferrule, section with all accessories complete all as specified and as directed.

Supply, laying testing and commissioning Flat submersible cable PVC insulated sheathed (Heavy duty) 1100 Volt grade with copper conductor of size 3 core 10 sqmm, complete all as specified and as directed.

Supply, laying testing and commissioning Flat submersible cable PVC insulated sheathed (Heavy duty) 1100 Volt grade with copper conductor of size 3 core 16 sqmm, complete all as specified and as directed.

S&F Mild Steel Column pipe heavy duty (ERW) both end threaded with two flange/socket of wall thickness 6.00 mm & length 3.00 mtr. 150mm bore conforming to IS-1239,incl Gasket & nut bolt and properly painted with one coat of black bituminous of surface internally and externally suitable for the drinking water including taking out of old unserviceable column pipe from position complete all as specified and as directed.

All as per item No 27.00 here-in-above, but 100mm bore complete all as specified and as directed.

Taking down carefully aluminium point wiring for one light, socket or power etc incl all fittings such as switches sockets, holders, light fittings, fan regulators etc and making good the disturbed surface of wall ceiling complete all as specified and as directed.

M&L for concealed Point wiring controlled by one switch with 1.50 Sqmm (nominal area) FRLSH, PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable and FRLS, ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and shadle including provision of mild steel terminal boxes/Sunken boxes of suitable size made with 1.6 mm thick mild steel sheet recessed in wall with a coat of black bituminous paint and providing of with 3mm thick bakelite/PVC sheet ISI marked top cover , suitable for fixing of switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete all as specified and directed for the following :- One light point controlled by one way switch 5/6 amps complete all as specified and as directed.

One ceiling fan point controlled by one way switch 5/6 amps & regulator complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board

One Exhaust fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

All as per item No 29.00 here-in-above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed by Engr-in-Charge.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and as directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F deluxe fan Electronic regulator AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S & F Wall mounted slim LED batten 20W, with extruded aluminium housing, with integrated LED driver complete all as specified and as directed.

S & F Linear and compact 7 W LED 2 feet suitable for mirror light fitting including taking down old u/s fittings complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass lamp(bulb) 1x15 watt230 volt base-22 complete all as specified and as directed.

M&L for concealed sub main wiring with 3 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor drawn in PVC rigid non- metallic conduit including taking down old submain wiring complete all as specified and as directed. NOTE : (i) Three run of submain wiring cable alongwith 20mm PVC conduit pipe shall be measured as one unit length.

S & F MCB, DB, TPN, 4 ways (8+12 WAYS), DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface including down down complete all as specified and as directed.

S&F Sheet metal enclosure for 8way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-43 protection suitable for fixing MCB"S/isolators with and incl blanking plates including taking down old DBs MCBs etc., complete all as specified and as directed.

S&F of MCB, Single pole and neutral 40 amps, 240 volts, ‘C’ curve, 10KA all complete as specified and as directed.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

M&L in replacement for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil with and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion all as specified and directed. Note: The Rate for Taking down the old unsv Earthing shall be deemed to be included in the unit rate.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep (metal body) with louver including making hole on existing wall for fixing Exhaust fan and making good to the disturbed surfaces complete all as specified and as directed.

S & F MCB, TPN, 10KA, 240V, "C" curve, 63 A, ISI marked complete all as specified and as directed.

Dismantling the AC sheet form the roof covering complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (dut not backing), removing rubbish of the premises complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm in each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 & n.exc. 4.00 sqm in each complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and as directed.

Use and waste the form work to soffits of suspended slab such as roof slab, landings and similar work . (Horizontal or sloping). For fair finished surface n.exc 200 mm thick .

M & L RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in slabs supported on walls beam and columns in floors, roofs, landing, deck slabs and shelves and the like complete all as specified and as directed.

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirrups complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L 40mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer 15 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed.

M&L glazed, ceramic, coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm thick, on vertical surfaces such as skirting, dados etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including back coat of rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 as in bedding layer for laying tiles on vertical surfaces complete all as specified and as directed.

M&L Verified Ceramic tiles 10 mm thick dark shade (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured including Screed bed or bedding layer 15 mm thick in cement mortar 1:4 on floors for laying floor finish complete all as specified and as directed.

M&L Verified Ceramic tiles 10 mm thick dark shade (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in wall etc. set and jointed in neat cement slurry and pointed in cement to match white or coloured including with the shade of tiles including back coat of rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 as in bedding layer for laying tiles on vertical surfaces complete all as specified and as directed.

M&L for machine cut Kota stone ( greenish colour, pre- polished) slab in one piece as in cill /staircase treads flooring , 20 to 25 mm thick ,over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete all as specified. Over & inlc15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

All as per item No 73.00 here-in-before, but as in riser & skirting (should be in one piece) Over & incl 10mm thick rendering in CM(1:3) complete all as specified and as directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement .

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and as directed. .

M&L Rendering 5mm thick in cement mortar (1:3) & finishing the surface even & smooth without using extra cement as in ceiling, soffits of slab complete all as specified and as directed.

M&L preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M & L Preparing old decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

M & L preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering complete all as specified and as directed.

M & L preparation old decorated surfaces of walls including complete removal of existing treatment and applying two coats of distemper oil-emulsion over a coat of wall putty complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M & L Preparing old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L preparing newly prepared surfaces of ceiling and applying three coats of white wash over chalk whitening preparatory to white wash complete all as specified and as directed.

M&L preparing old decorated surfaces of ceiling including complete removal of existing treatment and applying three coats of white wash over chalk whitening preparatory to white wash complete all as specified and as directed.

M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L preparation of old wooden surfaces of any description , not other wise described, over 10cm width or girth including and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L preparation of new painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer over newly prepared steel surface complete all as specified and as directed.

M & L preparation of old painting steel surface with one coats of synthetic enamel paint prepared steel surface complete all as specified and as directed.

S&F aluminium frame fixed partition with 12 thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination for bottom panels and top panels with 6mm thick tinted glass and frame work shall be of panel not less than 0.8m (section to be used for bottom rail, middle rail and other members shall be of 150x44x3mm, 125x44x3mm and 44x44x3mm respectively) including jointing cleats for fixing, cleats, rubber beading and aluminium beading, padding accessories as required complete all as specified and as directed.

S&F aluminium anodised partly glazed door shutter side hung type with style, rails ( Top, Bottom & lock rail), Top rail meeting style, lock rail of size 48 x 44mm, bottom rail 108 x 44mm, frame for chowkat size 38 x 63mm, all are made from anodised aluminium section including necessary jointing cleat, glazing, clips, rubber packing, anodised aluminium snap beading, screws of suitable size including 5mm thick sheet glass, partical board and suitable size aluminium anodised handle, etc complete all as specified and as directed. (Thickness of aluminium section shall not be less than 1.5 mm)

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 105 x 60mm complete all as specified and as directed.

S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers complete all as specified and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles & plain color PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain color PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Stainless steel butt hinges 75 mm size with stainless steel hinge pin complete all as specified and as directed.

S & F Aluminium, anodised, barrel tower bolts ,200mm size ,of extruded section and fixed complete all as specified and as directed.

S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and as directed.

S & F aluminium alloy anodised sliding door bolt of size 250 mm with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing complete all as specified and as directed.

S & F figured glass, 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each complete all as specified and as directed complete all as specified and as directed.

S & F in repair sheet glass of ordinary quality 4.00 mm thick in panes n exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair, 20mm dia aluminium anodised curtain rod complete all as specified and as directed.

S&F in repair, brackets for 20mm dia curtain rod complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern ), white (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe etc. complete fixed in repair complete all as specified and as directed.

S&F in repair flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern closet including all joints and making good to the floor complete all as specified and as directed.

S&F in repairs, 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and as directed.

S&F in repairs Vitreous China Urinal flat back size 465x355x265 mm white (minimum) , with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

S&F in repairs Vitreous China wash basin, size 550 x 400mm, white, flat back, with waste, coupling, chain and plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed.

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and as directed.

S&F in repairs, 15mm bore, PVC connecting pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed.

M&L in repair PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking up or down 15mm dia steel tubing & connection including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia steel tubing & connection including cleaning for refixing or removal to store complete all as specified and as directed.

S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and as directed.

S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed.

S&F in repairs 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 20 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs, 15mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and as directed.

M&L Water proofing treatment on RCC roof etc, comprising with the following operation & as specified here in below :- (a) Taking down/scraping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m (b) 15 mm thick plastering in cement mortar 1:3 finished even & smooth including supply & mixing of integral WPC @ 3% by weight of cement complete all as specified and directed. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 1.50 Kg per sqm conforming to IS 3384-1986 (e) A layer of APP bases polymeric membrane 3 mm thick (minimum) weighing 3.5 Kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be 100 mm on transverse direction & 75 mm on longitudinal direction. (f) Applying two coats aluminium paint over a coat of primer on newly plastered/ App bases polymeric memberance surface of any description over 10 cm in width or girth not otherwise described on including preparation of surface complete all as specified and as directed.

M/S SARKAR BROTHERS

M/S East India Traders

ANIL ENGINEERING CO

M/s. RAMPHAL GARG

PURBANCHAL BUILDERS