Renovation and Restoration of JKSPDC Staff Quarter at Gurez.

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm.

Random rubble masonry with hard stone from quarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 cement : 6 coarse sand).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size crushed stone aggregate.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand) on internal and external walls:-

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Painting with synthetic enamel paint one or more coats on old work (doors & Windows) on both sides (shutters) of approved brand and manufacture of required colour to give an even shade, incl preparation of base surface by applying of putty & scrapping with sand paper wherever required complete all.

Providing and fixing door and window items of approved quality incl.necessary screws complete all.

Providing and fixing aluminium sliding door bolts 250 x 16 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.

Providing and fixing aluminium tower bolts 100 x 10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing aluminium handles 100 mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper (Single rubber stopper), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.

ELECTRICAL FITTING:-Concealed Electrical/ PVC Channel fitting(wherever required) point. Includes all material & labour work. End to end wiring & installation of Modular switch board & Modular Switches Etc,testing and commisioning. Brands considered - Anchor Roma switch, Polycab/Finolex wires/Havells.

Providing,fixing,installation,testing and commissioning of electrical fittings (light points) including Service/ feeding lines with 1.5 Sq.mm FRLS&PVC insulated Copper conductor single core cable wire for lighting points and 2.5 sq.mm PVC insulated multi strand copper wire for Sub Main wiring alongwith earth wire ,06 Amp 3 pin sockets, Including Modular type Switch, Smart LED solution Metal water proof outdoor 24 watt lights, Philiphs 9 watt Ceiling Secure recessed ceiling lamps with all acceriories,Inverter lines ,Wiring for circuit/ ,including holders, ceiling rose on the junction box/PVC Block, hangers and fancy fittings PVC Conduit/ Channel with bends , junction boxes,06 Amp S Pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylem sheet with wooden box recessed in walls with accessories of approved quality such as Havells, Anchor etc, Inculding cost of cutting chases and making good the walls/Celing ,including telephone cable for 03 rooms all complete .

Providing,fixing,installation,testing and commissioning of electrical fittings Heating points fed by a separate Heating circuit and controlling switches, feeding Lines 4 Sq.mm size above, Main & Sub Main Service Lines with 10 Sq.mm size above FRLS PVC insultaed copper conductor single core , Inverter lines and fancy fittings 16 Amp Modular Switch & sockets combined, PVC Conduit/ Channel with bends , junction boxes, 32 Amp S Pole MCB, 32 Amp DP MCB,2 way DB for housing MCB and Hylem sheet with wooden box recessed in walls with accessories of approved quality such as Havells, Anchor etc, Inculding cost of cutting chases and making good the walls/Celing.

Providing , fixing,Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. including Service/ feeding lines, including 1200 mm fan with ceiling rose & PVC Square block, 350 watts electronic fan dimmer, PVC Conduit/ Channel with bends , junction boxes,06 Amp S Pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB with wooden box recessed in walls with accessories of approved quality such as luxury type Havells, Anchor etc., complete all.

SANITARY / WATER SUPPLY INSTALLATION:- Providing and fixing water closet squatting pan (Indian type W.C. pan) white vitreous china Orissa pattern W.C.pan size of 580 x 440 mm with integral type foot rests , with 100mm sand cast iron P or S trap, 10 liter low level white PVC flushing cistern, including flush pipe of approved makes,with manually controlled (handle lever)conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing PTMT towel rail complete with brackets Fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved quality and color,600mm long towel rail with total length of 645mm,78 mm wide and effective height of 88 mm, weighing not less than 190 grams.

Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps ,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherevre required white vitreous china wash basin size 630 x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing CP Brass 32 mm size bottle trap of approved quality and make and as per the directions of Engineer-in-charge.

Providing and fixing 20 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end)including necessary all fittings.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Providing and fixing 15 mm nominal bore with 45 cm length un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.(Semi ridged 40 mm dia.).

Providing and fixing mirror of superior glass (approved quality) of rectangular shape 453 x 357 mm with plastic moulded Frame of approved make and shade with 6 mm thick hard board backing.

Providing and fixing 20mm nominal outer dia pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.(External work including trenching, refilling etc.)

Providing and fixing 3 layer PN-16 pipe, 16mm OD(SDR-7.4) PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded,having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.(Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.)

Providing and fixing PPR Unions.

Providing and fixing PPR Unions 20 MM.

Providing, laying and jointing 100mm dia. soil waste pipe PVC Princes quality B- type inlet end from Latrine pan to septic tank including plain bends of required degree ,single equal junction of required degree with access door, insertion rubber washer 3 mm thick , Collars, P & S / F traps, complete all .

Providing, laying and jointing 75 mm dia. soil waste pipe PVC Princes quality B- type inlet end from Floor tarp to Soak pit including plain bends of required degree ,single equal junction of required degree with access door, insertion rubber washer 3 mm thick , Collars, Floor traps, Including Steel waste coupling, complete all.

Carriage of construction materials from source to site by MT loading and unloading.

Cement from to Dawar market to Mastan Gurez an average lead of 05 Kms.

Sand from Sumbal Bandipora to Mastan Gurez an average lead of 115 Kms.

Coarse Aggregate (Bajri) from Bandipora market to Mastan Gurez an average lead of 86 Kms.

Stones from Kanzalwan Gurez to Mastan Gurez an average lead of 20 Kms.

M/s Aabid Nabi Mir

BILAL AHMAD DAR

M/s Amir Showkat Malik

MOHAMMAD DILBER KHAN