Construction of Lake Nectar under Smart City Area Based Development

Amount

De-watering of Lake before start of any construciton activities like excavation ,filling etc to make it dry and suitable for construction .including hire charges of suitable nos of Pump, D.G. Set including POL, Operator , change over switch,Control panel etc. as required etc.

Construction of Impervious layer in all type of soil in multiple layers including preparation of bottom surface by removing all sharp edges ,stone particles ,wood particles and providing & laying 300 GSM PP non -Woven geotextile in first layer and 1.0 mm thick HDPE liner over first layer ,100 mm thick murrum filling over HDPE membrane ,murrum shall be free from any debris ,wood particles ,grass partical as per technical specification ,and providing and laying precast cement concrete block 100 mm thick over murrum base .

Dry stone pitching of required thickness including supply of stones and preparing surface complete

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.

Construction of Granite stone bench of 600 mm in width and 750mm in height including brickwork in CM (1:6) including necessary foundation .Outer surface of brickwork shall be finished with granite stone laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. including all necessary requirement as directed by Engineer in Charge .

Providing & Fixing Interlocking rubber flooring of thickness 15-20 mm as per technical specification

Providing and fixing 80 mm thick Grass paver in parking areas including all necessary requirement as per direction of engineer in charge

Supplying and filling Gravel rounded in shape in areas as per architectural drawing.

Supply and Fixing Red colour Sand Stone Bench

Supply, assemble and standard installation of 8 numbers open Gym equipments, plus 3 numbers Multi play Equipments & 2 numbers of standard installations for Kids play

Providing, Applying and finishing the top surface of M30 grade concrete, in accordance with sprinkling of STAMPO CRETE color hardener at the rate of 0.27 kg./Sqft., Floating the surface with different types of floaters, Stamping, cleaning the surface with water and applying acrylic based sealer for finishing for Cycle Track

All as per item 11.1 for Jogging Track

Construction of Bamboo Restaurant ( Only Structure)

Construction of Gazebo & Juice Herbal Shope ( Only Structure)

Construction of Bamboo Bridge for Jogging and Cycle Track

Construction of Entry /Exit Gate

Planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth mixed with farmyard manure, supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart.

Construction of Wooden Deck

Construction of HDPE Floating Deck

Supply and stacking of Butea Monosperma plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Supply and stacking of AZARDICA INDICA plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Supply and stacking of Cassia Fistula plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Supply and stacking of Acacia Catechu plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charg

Supply and stacking of Murrya Paniculata plant of height 100-120 cm. in big poly bags of size 15 cm as per direction of the officer-in-charg

Supply and stacking of Saraca Ashoka plant of height 180- 195 cm. in gunny bag of size 30 cm as per direction of the officer-incharge.

Supply and stacking of Tacoma Stans plant of height 100-125 cm. in big poly bags of size 15 cm as per direction of the officer-in-charge

Supply and stacking of Plumeria alba plant of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

Supply and stacking of Ficus Panda plant of height 80- 95 cm. in gunny bag of size 10 cm as per direction of the officer-incharge.

Supply and stacking of Ficus Benjamina plant of height 80- 95 cm. in gunny bag of size 10 cm as per direction of the officer-incharge

Supply and stacking of Tabernamontana plant of height 80- 95 cm. in gunny bag of size 10 cm as per direction of the officer-incharge

Supply and stacking of Bahunia Varigated plant of height 150- 165 cm. in gunny bag of size 20 cm as per direction of the officer-incharge

Supply and stacking of Hibscus Rosa Sinensis plant of height 50- 95 cm. in gunny bag of size 10 cm as per direction of the officer-incharge

Supply and stacking of Nyctanthus Arbor Tristi plant of height 80- 95 cm. in gunny bag of size 10 cm as per direction of the officer-incharg

Supply and stacking of PHYLLANTHUS EMBLICA plant of height 80- 125 cm. in gunny bag of size 15 cm as per direction of the officer-incharg

Supply and stacking of Mangifera indica (Mango-grafted ) plant of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-incharge.

Supply and stacking of BAUHINIA PURPUREA plant of height 80-95 cm. in big poly bag of size 20 cm as per direction of the officer-incharge.

Supply and stacking of MORUS ALBA plant of height 60-75 cm. in big poly bag of size 15 cm as per direction of the officer-incharge.

Supply 3 nos of 4 seater paddle boats, made up of Fiberglass, Isophthalic Marine grade Resin, Gelcoat and vacuum infusion system.

Providing Fountain Inside the lake as per layout drawing

Providing water cascade as per layout drawing

Providing Musical Fountain as mentioned in Layout

Providing & Fixing RO Unit for Food outlets 2000 litre

Water Level Sensors

Transfer Pumps from Canal (rent basis)

Installation of submersible motor pump set in tube-well/open well complete (labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose.

Providing and laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required

Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and comissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck Foo tBend, with Guide wire SS 304 etc. complete with all respect as per specification .Discharge 36 cum/Hour and Head 8-10 m

Supply and Installation submersible pump of capacity 6 cum/Hr @ 20 meter head as per specification with all requirement .

Supply and Installation Centrifugal Potable Water Transfer Pumps of capacity 6 cum/Hr @ 12 meter as per specification with all requirement .

Supply and Installation CCentrifugal Irrigation Water Transfer Pumps of capacity 12 cum/Hr @ 10 meter as per specification with all requirement .

Construction of 55 KLD STP based on MBBR Technology including all unit

Submersible Potable Wate Transfer Pumps of 2.5 m3/hr @ 20 m head as per specification with all requirement .

Water Level Sensors

Supply delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Non clog submersible pumping set of 2% Ni CI Cascading, Impeller CF 8M ,Shaft SS 410,mechanical seal with 10M Power & Control cable , 5M Galvanized Chain,,10M, 50mm MS galvanized Guide pipe, Duck FootBend, with Guide wire SS 304 etc. complete with all respect as per specification in overflow structure 600 m3/hr @ 10 m head

Providing Submersible pump in sump of 0.5 HP

Solid Waste Management for entrie lake premises including providing composit pit , collection pit, dry & wet Litter bin ,bins for food outlet ,paper bin ,container for waste cooking oil, waste bin for toilet,Basket for sorting waste,Waste Carting arrangement etc.

Providing & fixing Perforated Pre-cast RCC grating over drain as per technical specification

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Provision of Wifi ,CCTV ,Smart Display ,Public address system etc complete all as per requirements

Package Sub-Station: SITC of 630 kVA, 33/ 0.433 kV Package Sub-Station (SCADA compatible) consisting of non extensible RMU with SF6 insulated Vacuum Circuit breaker & fixed manual operated load break switch, CRT dry type transformer or hermetically sealed oil type transformer with LT devices containerised in an outdoor type enclosure of galvanized sheet steel having modular construction with IP-54 degree of protection for HT & LT switchgear compartment and IP 23 degree of protection for Transformer compartment. Each compartment shall be provided with the door & pad locking arrangement.The enclosure exterior shall be painted with epoxy based power paint.

Silent Diesel Generating Sets with AMF Panel: Supplying, erecting, commissioning and testing diesel generating set having continuous rating of 420 kVA, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/ water cooled diesel engine with multi-cylinders developing suitable BHP capacity at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories , electric starting equipment complete with standard battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/ floor mounted fuel tank with level indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation ± 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine and alternator both connected to each other by flexible flange coupling and with floor/ wall mounted control panel box comprising of necessary metering & control switches of adequate capacity. The alternator & control panel shall be connected with suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 18 SWG CRCA Sheet steel, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS: 8183. The resin bonded Rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1.0 mtr, as per PVCT norms. Vendor’s scope shall also includes erection, commissioning and satisfactory testing as per requirement with first filling of fuel, oil, etc. with obtaining all necessary certificate from statutory authorities.

LV Power Control Centre/ Distribution Boards:

LV Power Control Centre: S.I.T.C of LV PCC Panel (Indoor) totally enclosed type as per IS: 2147, suitable for operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-52, with instrumentation compartments accomodating necessary metering / indicating lamps, power & control contactors, instrument transformers as per IS: 2705, Relays & control fuses, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with microprocessor based air circuit breakers, microprocessor based/ air break fixed type MCCB/ MPCB, suitable rating incomer / outgoing feeders as per design & SLD drawings

Power Distribution Boards/ Vertical Distribution Boards (Outdoor): S.I.T.C. of Power Distribution Boards/ Vertical Distribution Boards (Outdoor) totally enclosed as per IS 2147, suitable for operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-54, with instrumentation compartments accomodating necessary metering / indicating lamps, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with microprocessor based/ air break fixed type MCCB/ MCB, suitable rating outgoing feeders as per design & SLD drawings.

Power Distribution Boards/ Feeder Pillar (Outdoor): S.I.T.C. of Power Distribution Boards/ Feeder Pillar (Outdoor) totally enclosed as per IS 2147, suitable for operation on 3-Phase, 415V, 50Hz, Neutral effectively grounded, IP-54, with instrumentation compartments accomodating necessary metering / indicating lamps, air insulated electrolyte grade Aluminum busbar for three phase & neutral system with microprocessor based/ air break fixed type MCCB/ MCB, suitable rating outgoing feeders as per design & SLD drawings.

Automatic Power Factor Correction Panel: S.I.T.C. of LV APFC panel (190 KVAR) consist of required capacitor banks for continuous duty to improve P.F. 0.85 to 0.99 in required steps enclosed in dust & vermin proof compartment, indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for base frame/ channel/ gland plates, 2.0 mm for load bearing members/ doors & 1.6 mm for internal partitions, minimum degree of protection - IP 42, busbar chamber, required size of Al bus bar/ terminals, minimum 10 stage APFC relay, metering, indicating lamps, push buttons complete as per IS: 16636-2017 with latest ammendment & detailed technical specification and data sheet.

Indoor / Outdoor Lighting System: Design, supply, erection, testing and commissioning of suitable lighting & ventilation arrangement for various facilities within the development area including required lighting fixtures, fittings, point wiring, distribution box, street/ pathways/ landscape lighting poles with junction box, etc. with complete job.

Uninterrupted Power Supply (UPS) : Design, Supply, Installation, Testing and Commissioning of 2 nos x 5 KVA Industrial grade Uninterrupted Power Supply (UPS) True On-line, double conversion modules having 415V, 50 Hz, 3phase,4 wire at input end and 415 V, 50 Hz, 3 phase, 4 wire, 0.9 pf at output end as per specifications conforming to relevant IS/ IEC. Both the UPS shall be operated in Parallel redundant load sharing mode with 30 minute battery back up on full load (0.9 pf) using Ni Cd SMF batteries for each UPS to provide continuous, regulated AC power under normal and abnormal conditions, including loss of the utility AC power.

Earthing & Lightning Protection System: S.I.T.C. of earthing & lightning protection system for all the equipment/ facilities with in area using eath pit of minimum bore dia 150 mm size aproved make Safe Earthing Electrode consisting pipe-in pipe Technology as per IS: 3043-1987 made of corrosion free GI Pipe having outer pipe dia of 50 mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising connection terminal dia. of 12 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation including cost of earth conductors, accessories & associated civil works complete job.

Fire & Safety Equipment for Electrical System: Design, supply, erection, testing and commissioning of safety accessories for all electrical equipment/ system includes. (a) Rubber Mat for HV & LV application of required length and breath. (b) Providing printed Instruction Chart both in Hindi & Englishand duly framed with front glasses for treatment of person suffering fron electric shock. (c) Standard First Aid Box with all the standard contents (d) Fire Bucket with 9 Litre Capacity (f) Fire Extinguisher (CO2 Type) (g) Rubber Hand Gloves

Solar PV Roof Top System including used as shade over car parking. Design, supply, erection, testing and commissioning of 115 kW solar PV roof top system utilizing available shadow free roof top area to harness the solar energy. The system shall comprise of PV Module of ≥250Wp ratings (Thin film, poly crystalline) with efficiency assurance of minimum 15%, Power Conditioning Unit, and Solar Inverter with necessary accessories. The components shall be as per MNRE approved makes. The solar roof top system shall be grid connected based on Net Metering Regulation of MPERC as amended up to date. The scope shall also include SITC of 2 nos charging poits at each car port.

33 kV metering equipments including application fee, security deposit, consumption demand charges & other charges etc for sanction/ release of electrical connection from concerned power supply company

Miscellaneous items-(Bamboo Pergola ,Stone Seating, dustbin, signage, road marking, wall murals, herbal Shop, Cycle Stand , charging stations, small solar trees, Art walls, stepping stones, Zen garden, topiary, fish pond etc.)

Operation and maintenance of Complete Nectar Lake Project For 1st Year

Operation and maintenance of Complete Nectar Lake Project For 2nd Year

Operation and maintenance of Complete Nectar Lake Project For 3rd Year

Bidder Name

Amount

VIJAY KUMAR MISHRA CONSTRUCTION PVT LTD

MOHAN LAL CONSTRUCTION

SHIVSHAKTI CONSTRUCTION COMPANY

SHIVSHAKTI CONSTRUCTION COMPANY

VIJAY KUMAR MISHRA CONSTRUCTION PVT LTD

MOHAN LAL CONSTRUCTION

VIJAY KUMAR MISHRA CONSTRUCTION PVT LTD