Repair and improvement work of officers transit of Public Works Department in Bareilly district.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. (As per dsr . 22.22.A)

Providing and fixing angle frame for doors windows and ventilators of mild steel angle sections 35x 35x5 mm or 35x 5 mm flat .. Engineer in charge As per dsr . 10.31

Removing white or colour wash by and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete DSR NO. 13.88

12 mm cement plaster of mix:. 1:4 (1 cement : 4 coarse sand ) As per dsr 13.4.1

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. As per D S R 13.26

Finishing walls with acrylic smooth exterior paint of required shades As per dsr 13.46.1

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick As per dsr 11.26.1

Providing and fixing fly proof galvanished m.s wire gauge to windows and clesrestory windows using galvanished m. s wire gauge with average width.. 2nd class teak wood beading 62x 19 mm DSR NO. 9.51.1

Supply and fixing of flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. 32 mm thick As per dsr. 9.20.1

Appling priming paint with ready mixed aluminium primer of approved brand and manufacture on resinos wood and plywood DRS NO. 13.50.2

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 20mm dia nominal bore. DSR-18.10.2

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm dia nominal size dia DSR NO. 23.3.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore As per dsr . 18.53.1.

Providing and fixing brass bibe 15 mm dia nominal bore. DSR-18.15.1

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. AS per dsr 18.48

6 mm thick clear heat strengthened glass (DSR..2618)

Construction of granular sub-base by providing close graded material mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with Mechanical Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 . (Analysis)

Providing and laying of factory made 80 mm thick Interlocking cement concrete tiles (30mpa) including 25mm thick compacted bed of fine sand compacting and proper embedding/ laying of Interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material, labour T&P etc.required for proper completion of work as directed by Engineer-in-Charge. ( pwd sor road work new item no. 1 )

2.5 cm thick((1") 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm.(3/4")graded approved stone shingle laid In panels finished with 3 mm.(1/8") floating coat of neat cement or cement and marble dust in 5:1 as specified over & including Scm. (3") 'thick. base concrete consisting of cement local sand and brick ballast 4cm.(1/4") gauge in the proportion of 1 :4:8 and removing any over lapping mortar at the joints of Panels if any and giving them a uniform finish including supply of all materials, labour' and T&P etc. requierd for proper completion of the work. SI no. 601

R.C.C. work with cement approved coarse sand and 2 cm (3/4") gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.l. binding wire and includuing Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. (but for slabs.) S.I.No.284(A)

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks.(S.I.no.504)

Please Enable Macros to View BoQ information