Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹22.4 L
EMD Value
₹44,871
Closing Date
15 Sept 2026, 6:00 pmClosed
The Administrator, Ranaghat Municipality
Subhas avenue,Ranaghat municipalty,Nadia 741201.
Repairing of Bituminous road from h/o Bipul Bala to Dipak Tea Shop at Magurkhali Road Health Centre more to Pradip Tea Shop via h/o Badal Sarkar to h/o Vola Paul at Gopalnagar Road bye lane h/o Bapi Acherjee to h/o Rita Paul near Amtola more
2026_MAD_1040039_14
WBMAD/ULB/RM/NIT-2e/26-27
Open Tender
CIVIL WORKS
Percentage
30 days
Ranaghat Municipality
Refer to tender documents.
3 documents required · 3 mandatory
₹0
₹44,871
Yes
18 Sept 2026
1 Sept 2026
18 Sept 2026
1 Sept 2026
15 Sept 2026
1 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Tack Coat
Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular
/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).
i)On bituminous surface @ 0.20kg- 0.3kg /sqm. | - | Sqm | 21.93 | - |
| 2 | Bituminous Macadam
Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix, transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(Reference to MORT&H's specification clause 504). for Grading II (19 mm nominal maximum aggregate size) Layer Thickness 50-75mm | - | Cum | 12,728.28 | - |
| 3 | Open - Graded Premix Surfacing
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2
mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared
base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level
and grades (Reference to MORT&H's specification clause 510).
Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour . | - | Sqm | 258.37 | - |
| 4 | Seal Coat
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to
MORT&H's specification clause 511).
12(i) Case - I : Type A (Stone chips 6.7mm size) Providing and laying of liquid seal coat with HMP using
approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. | - | Sqm | 129.12 | - |
| 5 | Sub Total | - | - | - | - |
| 6 | GST 18% | - | Nos. | 3,38,850.22 | - |
| 7 | CESS 1% | - | Nos. | 22,213.51 | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
BOQ_2554178.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .