ED/IIMC/NIT/1/22-23 /69

Amount

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars, in any floor..

Dismantling all types of plain cement concrete works, in any floor, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. Upto 150 mm. thick.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. in any floor.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. in any floor.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound etc.

Hire and labour charges for 25 mm to 30 mm thick wooden shuttering with centering and necessary staging using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works, in any floor.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work). With earth obtained from excavation of foundation.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, in all floors.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in all floors.

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge. 20 mm thick, in any floor.

Removing corroded worn out portion of reinforcement (when the area of bar is damaged by more than 25%) by cutting and replacing the same by a new bar of requisite diameter by binding with required lap / welding with old bar, including cost of reinforcement, complete in all respect, in all floors including removing unserviceable materials from site as per direction of the Engineer - in - charge. Note : Payment on weight (Kg.) of new reinforcement

Brick work with 1st class bricks in cement mortar (1:4) in all floors.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in any floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (in any floor). [Excluding cost of chipping over concrete surface] With 1:4 cement mortar. 20 mm thick plaster.

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per 100 sq.m

Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification. [Mode of measurement: The affected surface area of reinforcement shall be considered for payment]

Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface).

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with cement in proportion as per Manufacturer's specification, in all floors.

Easing, oiling and adjusting the steel shutters including scraping all members and fitting so as to make the shutters easily operable (no extra payment will be made for taking out and fixing glass, if necessary).

M.S. or W.I. integrated grill as per approved design, joints continuously welded with M.S. flats and bars, in any floor.

Labour for taking out steel window frame for repairs and re-fixing the same (or replacement by new one) including mending good damages (excluding the cost of repair of damages).

Renewing M.S. members of steel shutters by welding including taking out the old, mending good damages complete etc.

Supplying, fitting and fixing openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars continuously welded etc. fitted and fixed with necessary screws and lugs, in any floor.

Renewing hinge of steel shutter including taking out old one by cutting and fixing new hinges by welding and mending good damages complete, in any floor.

Renewing two point steel plated or oxidised handle of steel doors and windows as directed including painting complete.

Renewing steel plated or oxidised casement stay or peg stay of steel window frames including painting two coats with approved paint complete.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections etc.) connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding using electrodes of approved make and brand, haulage, hoisting and erection all complete in any floors. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight.

Welding in M.S. structural work with gas or electric

Supplying best Indian sheet glass panes fitted and fixed complete. (in all floors) 4 mm thick

Renewing worn out putty of glass panes, in any floor.

Supplying best Indian figured glass viz. hammered, fluted, ribbed, pinhead etc. type; White in colour, including cutting to required sizes, setting on putty bases and fitted and fixed with nails and putty complete. (in all floors)

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) in all floors as per manufacturer's specification. TWO coats

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. One coat on new surface

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. Premium 100% Acrylic Emulsion. Two coats

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: On timber or plastered surface: With super gloss (hi-gloss). Two coats (with any shade except white)

Painting with a best quality synthetic enamal paint of approved make and brand including smoothing surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or any other surface : With super gloss (Hi-gloss). Two coats (with any shade except white)

Priming one coat on steel or any other surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Labour for dismantling old pipe with fittings

Supply of UPVC pipes (B Type) conforming to IS-13592-1992. Single Socketed 3 Meter Length. 160mm Dia.

Supply of UPVC pipes (B Type) conforming to IS-13592-1992. Single Socketed 3 Meter Length. 110mm Dia.

Supply of UPVC (B Type) & fittings; 160mm Dia Bend 87.5º

Supply of UPVC (B Type) & fittings; 110mm Dia Door Bend 87.5º

Supply of UPVC (B Type) & fittings; 110mm Dia Plain Y

Supply of UPVC (B Type) fittings; 160mm Dia ; Plain Tee

Supply of UPVC (B Type) fittings; 160mm Dia ; Door Tee

Supply of UPVC (B Type) fittings; 160mm Dia ; Pipe clip

Supply of UPVC (B Type) fittings; 160mm Dia ; Vent Cowl

Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings 20 mm dia

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats, clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 20 mm dia

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats, clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 32 mm dia

ISWAR ENTERPRISE

BINOD

TAPAN ENTERPRISE