Construction of Kachugaon Development Block under 5th ASFC 2019-20.

Amount

CIVIL WORKS : EARTHWORK IN EXCAVATION: Earth work in excavation for foundation, trenches of walls, retaining walls, footing, columns, steps and septic tank etc. Including refiling (return filling) the quantity as necessary after complete of work, breaking clods in return filling dressing, watering and ramming etc and removal of surplus earth with all lead & lift as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00 below the existing ground level. (a) In ordinay soil.

Earth/ Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming, etc complete as directed and specified. Including payment of land compensensation, Forest Royalty, Sales Tax and other duties an d taxes as may be necessary , (C) With river sand or silt (predominently non plastic) by truck carriage including loading and unloading.

Plain cement concretre work with course aggregate at size 13mm to 32mm in foundation bed for footing steps, walls brick work etc. as directed and specified including dewatering if necessary and curing complete(Shuttering works where necessary shall be measured and paid separtely) a) In prop 1:3:6

Plain cement concretre work with course aggregate at size 13mm to 32mm in foundation bed for footing steps, walls brick work etc. as directed and specified including dewatering if necessary and curing complete(Shuttering works where necessary shall be measured and paid separtely) b) In prop 1:4:8

Plain cement concretre floor base in prop 1:3:6 laid in alternate bays as specified with course aggregate at size 13mm to 32mm including dewatering if necessary and curing complete. c) 100 mm thick

Providing and laying 25 mm thick DPC with CC in prop 1:1:5:3 with graded stone agg. Of 10 mm down nominal size including providing approved damp proof admixture in prop as recommended by the manufacture including curing etc. complete as directed.

REINFORCED CEMENT CONC WORK Providing and laying plain/reinforcement cement concrete works in prop 1:2:4( 1 cement : 2 coarse sand :4 coarse aggregate 20mm down ) including dewatering if necessary and curing compelete but excluding cost of from work and reainforcement for reainforced cement concrete work. (from work and reainforcement will and be measured and paid separately) (i) Using mixture machine (A) In sub-structure upto plint level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank not less than 100mm thick plinth level. (N) Without using admixture, plasticser c) M 25 grade concrete

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, linte; sill band, beam, girder, bressumer, cantilever, staircase (except sprial staircase and landing) including preparing the top surface and finishing or nosing. (N) Without using admixture, plasticser c) M 25 grade concrete

iii) Vertical and horizontal fins (Thickness not less than 100mm) individually or forming box lourvre and projected band. (N) Without using admixture, plasticser c) M 25 grade concrete

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

SHUTTERING AND FORWORK PLYBOARD SHUTTERING (FORMWORK) Providing from work of 12mm thick plywood Board so as to give a rough finish including etc. height of proping and centering below supporting floor supporting floor to ceiling not exeeding 4.0M and removal of the same for situ reinforced concrete and plain concrete works in: Columns, pillars, Post & Struts of square/ rectangular/ polygonal in plan or any shape like Tee/ L etc. having plane vertical face.

Sides and Soffits of Beams, beam haunchings, cantilever griders, bressumers, lintels and horizental ties. A) For depth not exeeding 1.0M

Flat Surfaces such as soffits of suspended floors, roofs landings, cantelever salbs, chajjs, balconies and the like. (a) Floors etc. upto 200m in thickness.

Sloping or Battering sufaces such as sloped slabs etc. including folded plates. (a) Where ties, inclination to horizontal plane does not exceed 30 requiring shuttering only on the underside.

Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.

Staircase with sloping or steppedb soffits including risers and stringers ut excluding Landing.

Extra foe each subsequent floor or part thereof above the first floor level as mentioned in item no. 3.2.1 & 3.2.3 (b).

MASONRY WORKS Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to lavel and in pael after preparing the sub grade as directed including all labours and materilas and if necessary dewatering complete. a) Brick on flat soling

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Extra cost for lifting of brickbats and sand for filling of sunk floor for each subsequent floors above the ground floor as directed and specified.

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In sub-structure upto plinth level including dewatering if necessary. (b) In proportion 1:4

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (II) In sub-structure upto plinth level up to 1st floor level. (b) In proportion 1:4 (1 cement:4 sand)

Extra over item No. 4.1.4 above for brick work in subsequent floor or part there of above 1st floor level

1st class brick nogged wall in cement mortar in racking out joint and caring complete as directed in super structer above plinth upto 1st floor level. (a) 112mm thick brick wall (b) In cement mortar in proportion 1:4 (1 cement : 4 sand )

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick wall / R.B wal FLOORING AND FLOOR FINISHES TILES WORKS CERAMIC TILES ON WALLS

Providing polish ceramic Wll tiles of approved quality, size , shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10m thic in prp. 1:3 (a cement : 3 coarses sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / sika/ Pedelite/ Rouf) /White cement slurry mixed with approved piment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be masured and paid separately) . ( Coloured pigment should be in conformity with color or tiles and as approved and directed by the Department). (Walls means both interior and exterior walls) b) Executive range Somany/ Orient/Nitco/Asian Make.

Providing Antiskid tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15mm thic of 1:3 (1 Cement : 3 coarse sand ) approved make fix with Fix-A-Tile (Choksey / sika / Pedelite /Rouf ) / White cement complete at all levels as specifed and directed. (Cement separately). (A) CERAMIC a) Normal range (Sizes 300mm×300mm and above) (a) Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Being, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Stale

CEMENT CONCRETE FLOORING 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1 Cement : 3 coarse sand: 6 coarse aggregate of 25mm and down ) and 15mm thick wearing layer in cement concrete in prop. 1:1:2 (1 cement : 1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

KOTA STONE SLAB Kota- stone flooring with 18mm thick marble stone (sample of marble shall By Engineer-in-charge) over 20mm thick base of cement mortar in prop. 1:6 (1 Cement : 6 coarse sand ) laid over and jointed with grey cement slurry ixed with pigment to match the shade of slab including and polishing complete. (2) 600× 900mm and above

10mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not execeeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement 1:4

15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not execeeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side. (c) In cement 1:4

20mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles,chamfersand/or not execeeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side. (backing coat 15 mm and finishing coat 5mm thick) (c) In cement 1:4

Extra over item no. 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs upto 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no. 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster

Extra over item no. 6.2.1 to 6.2.3 for interior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. b) On two coat plaster

Extra over item no. 6.2.1 to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. b) On two coat plaster

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed A) Up to 300 mm width c) Raised band

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. B) Above 300 mm width b) Sunk band

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. c) Raised band

Pointing Pointing on brick work with cement mortar including curing complete as directed. (Measurement shall be taken on surface area of the wall) B) Cement mortar. 1:4 c) Ruled pointing

ROOFING Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self driling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid serparately) TATA Blue scope/Dyna roof / Durakolor / Wonder Roof or equivment as directed by the Department. (iv) 0.60 mm thick

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) accessories (Ridges/ Valley / Gutter /Flashing) at all lavels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/Dyna roof / Durakolor / Wonder Roof or equivment as directed by the Department.

WOOD WORKS Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm unifformly thick cross bands, style & rails made from hardwood tiber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels ( Door fixtures and fittings will be measured and paid separately) (b) 35 mm thick

GRILL Providing, fitting and fixing M.S. Grill of requred pattern for windows/ clerestory windows/ opening with M.S. flats at requred spacing in frame all round, square or round M.S. Bars with round headed bolts and nuts or screws. I. Plain grill (b) Fixed to Brickwork/P.C.C/R.C.C

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizental glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and fitted with providing and fixing handles, frictions strays, joining cleat, bolting device, locking arrangement, spring catch as requred complete as specified and directed for all levels. (a) 2 Track sliding windows (i) 6mm clear glass

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizental glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and fitted with providing and fixing handles, frictions strays, joining cleat, bolting device, locking arrangement, spring catch as requred complete as specified and directed for all levels. (b) 2 Track sliding windows (i) 6mm clear glass

P.V.C DOORS Providing, fitting and fixing 24mm/ 29mm thick polymer reainforce moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc, as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately) b) 29mm thick.

PAINTING PLASTER OF PARIS & WALL PUTTY Providing two coats of J.K Wall Putty (White Cement based for concrete/mortar walls and ceilling both internal and external) after removing all lossely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

WALL PAINTING Wall painting (two coats ) with acrylic emulsion paint aprroved band and manufacture (Asian/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooths. (a) Acrylic Emulsion Piant approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Extra over item no 13.4.1 above for painting with acrylic emulsion paint aprroved band and manufacture (Asian/ J & N paint/ Nerolac) on ceilling and on sloping roof. (i) Acrylic Emulsion Piant approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

PAINTING ON STEEL AND OTHER METAL SURFACE Applying priming coat over new wood and wood; based surfaces over 100mm in girth / width after and including preparing the surface by througly cleaning oil, grease, dirt and other foriegn matter, sand papering and knotting a) With ready mixed paint, wood primer (pink)

Painting two coats (excluding priming cat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ICICI paint/ J & N Pint/Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. i) General purpose (Asian paint/ Berger paint/ ICICI paint/ J & N Paint/Nerolac)

SPECIAL WEATHER PROOF COLORING Finishing wall with water proofing weather coat smooth ani-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after claening and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

DOOR AND WINDOWS FITTINGS ALUMINIUM FITTINGS Supplyings, fitting, fixing anodised aluminium fittings of approved make, resonably smooths, free from sharp edges and cornes, flaws and other defects and with counter sunk hloes for screws including necessary aluminium screws etc. complete.(anodised to bright natural matt & satin finished) a) Slinding door bolts ii) 250mm × 16mm

b) Tower bolts ii) 200mm × 12mm

c) Door handles ii) 100mm

I) Hydraulic door closure

t) Door stopper with rubber stopper

STEEL AND IRON WORKS REINFORCEMENT Supplying, fitting and fixing in position reainforcement bars conforming to relavent I.S. Code for R.C.C work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs spacers etc. complete. (No Extra measurement for lap, hook, chair , anchor etc. will be entertained in the measurement as the are including in the rates) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/ESSER Steel/ Jindal steel/ Shyam steel /RINL (i) TMT Corrosion resistant steel (CRS) reainforcement bar

Extra over item 18.1.1(a,b,c) for each subsequent floor or part therefor above first floor level.

M.S. GRILL Providing fitting and fixing M.S. grill of required pattern for windows/clerestory windows/opening etc. (1) Plain grill. ( C ) Fixed to brick work/P.C.C/R.C.C.

ROOF TRUSS Providing, fitting , hoisting and fixing of roof trusses fabrication out of combination of any two or all of the following section (i) Square section (ii) Rectangular Hollows section of specification RSH/SHS and (iii) M.S. circular hollow section conforming to reavant I.S. code, as per approved design and drawing including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of aprroved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joist as per design and drawing as directed. b) Using other ISI marked approved brand tube

DOOR FRAMES Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame etc....complete as directed by the department for all levels. (P.C.C. to be measured and paid for separately). (a) 1.25mm thcik sheet (iii) Size 125mm × 60mm (Single rebate)

M.S RAILING WITH HAND RAILS Providing and fixing M.S. railing made of hollow tubes, channels, plates etc., including and making curvature (whatever required ) and fiting the same with necesary plates, nuts and bolts complete etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge.

PLINTH PROTECTION WORKS Providing plinth protection with bricks flat laid in cement mortar 1:4 and finishing with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100 mm thick CC (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finishing with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trances and refilling the sidesn after completion of work etc. as specified. ii) 300mm wide and average 150mm deep with bed slope in 150 with intial depth of 100mm.

WATER PROOFING, CONCRETE ADMIXTURE & CHEMICAL TREATMENT, REPAIR, SURFACE PREPARATION Prepare the RCC surface in roof slab, chajjas, terraces, sunken slab, septic tank, OH tank, raft slab, walls etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.

WATER PROOFING OF CHAJJAS, ROOF SLABS, TERRACES, SUNKEN SLABS, SEPTIC TANK, OH TANK, RAFT SLAB IN BASEMENT, WALL ETC. (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ration 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ration 1:2 as a prime coat.

ANTI TERMITE TREATMENT Pre contruction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surfaces area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the department complete. a) With aqueous emulsion having concentration 1:19 with chloropirophose solution (tricl or equivalent) and water, i.e 1% solution.

DETAILS ESTIMATE OF SEPTIC TANK (100 USERS CAPACITY) EARTHWORK IN EXCAVATION: Earth work in excavation for foundation, trenches of walls, retaining walls, footing, columns, steps and septic tank etc. Including refiling (return filling) the quantity as necessary after complete of work, breaking clods in return filling dressing, watering and ramming etc and removal of surplus earth with all lead & lift as directed and specified in following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00 below the existing ground level. (a) In ordinay soil.

PLAIN CONCRETE WORKS Plain cement concretre work with course aggregate at size 13mm to 32mm in foundation bed for footing steps, walls brick work etc. as directed and specified including dewatering if necessary and curing complete(Shuttering works where necessary shall be measured and paid separtely) a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing and laying plain/reinforcement cement concrete sand & 20mm down graded stone aggregate including dewatering if necessary and curing compelete but excluding cost of from work and reainforcement for reainforced cement concrete work. (from work and reainforcement will and be measured and paid separately) (i) Using mixture machine (A) In sub-structure upto plint level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank not less than 100mm thick plinth level. (N) Without using admixture, plasticser a) M 15 grade concrete or Prop 1:2:4

b) M 20 grade concrete or Prop 1:1,5:3

TIMBER SHUTTERING (FORMWORK) Providing from work of ordinary timber planking so as to give a rough finish including centering, Foundation, footing, bases of columns, pile cap, raft and mass concrete works etc. height of propin and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete works in Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. Foundation, footing, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

PLYBOARD SHUTTERING (FORMWORK) Providing from work of 12mm thick plywood Board so as to give a rough finish including etc. height of proping and centering below supporting floor supporting floor to ceiling not exeeding 4.0M and removal of the same for situ reinforced concrete and plain concrete works in: Flat Surfaces such as soffits of suspended floors, roofs landings, cantelever salbs, chajjs, balconies and the like. (a) Floors etc. upto 200m in thickness.

Vertical surface such as walls (any thicness) , parapet walls, partitions and the like including attached pilasters , butresses, plinth and string coures and the like.

MASONARY WORK Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to lavel and in pael after preparing the sub grade as directed including all labours and materilas and if necessary dewatering complete. a) Brick on flat soling

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In sub-structure upto plinth level including dewatering if necessary. (c) In proportion 1:6

1st class brick nogged wall in cement mortar includinmg racking out joints and curing complete as directed in sub-structure upto plinth level. (A) 112mm thick wall (c) In cement mortar in proportion 1:6.(1 cement:4 sand)

CEMENT SAND PLASTERING 15mm thick cement plaster in single coat on rough side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not execeeding 80mm girth and finished even and smooth including curing complete as directed. A) On Fair side. (c) In cement 1:4

Neat Cement Punning

Supplying, fitting and fixing in position reainforcement bars conforming to relavent I.S. Code for R.C.C work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs spacers etc. complete. (No Extra measurement for lap, hook, chair , anchor etc. will be entertained in the measurement as the are including in the rates) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works, retaining wall & boundary wall etc.)

DETAILS ESTIMATE OF PLUMBING & SANITARY WORKS EUROPEAN TYPE WATER CLOSET Providing fitting and fixing vitreous china pedestel tyoe water closet (European type W.C. pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make/a) White/(vii) Niagara (Cat No.C0252) (inclusive of seat cover)

INDIAN TYPE WATER CLOSET Providing fitting and fixing vitreous china pedestel tyoe water closet squatting pan (Indian type W.C. Orissa pattern) with all fittings and fixing complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type Orissa pattern of size 500mm a) White i) Parryware make

PVC FLUSHING CISTERN Supplying, fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (pipes will be measured separately) i) Parryware make/a) White/(i) Economy Single Flush (Cat No.8090/C8055)

WASH BASIN Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop coacks, waste coupling are to be separately) Basin (without pedestal) PEDESTAL BASIN (with pedestal) A) Parryware make/a) White/(iv) Cascade NXT 550 × 400 with long Pedestal (Cat No.C0404/C0380)

C.P FITTINGS & ACESSORIES MIRROR Providing, fitting and fixing Mirror with plastic frame of size 500×400mm complete as directed and specified SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified (i) Jaguar Make/ (a) Continental (Cat.No.ACN-1135N) (with glass bottle)

ROBE HOOK Providing, fitting and fixing CP robe hook complete as directed and specified (a) Jaquar make/ (a) Continental (Cat.No.ACN-1191N)

TOILET PAPER HOLDER Providing, fitting and fixing CP Toilet paper holder complete as directed and specified (a) Jaquar make/ (a) Continental (Cat.No.ACN-1151N)

WASTE COUPLING Providing, fitting and fixing CP Toilet waste coupling complete as directed and specified (a) Jaquar make/ (i) 32mm (HT/FT) (Cat.No.ALD-705/709)

TOWEL RAIL, TOWEL RACK & TOWEL RING Providing, fitting and fixing CP towel rail complete as directed and specified (a) Jaquar make (ii) Continental towel ring round (Cat. No.ACN- 769B)

BOTTLE TRAP Providing, fitting and fixing CP bottle trap complete as directed and specified (a) Jaquar make/ (ii) Bottle trap (with internal partiion) 32mm size with 300mm long wall connection pipe (Cat.No.ALD-769B)

BIG COCK Providing, fitting and fixing CP bib cock 15mm dia of appropved brand directed and specified (a) Jaquar make/ (a) Continental/Clarion (i) Standard\

STOP COCK Providing, fitting and fixing CP bib stop cock of appropved brand and size mentioned below as directed and specified. (G.I. & C.P. pipes will (a) Jaquar make/ (a) Continental/Clarion (ii) 15mm dia (Angular stop cock)

PIPES & FITTINGS PVC PIPES, BENDS, JUNCTIONS, TEES ETC. Supply, fitting and fixing PVC pipes of 6 kg/cm2 (Suprem/Princes) or other ISI approved including joining, ftting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches (ii) 110mm dia.

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

PIPES & FITTINGS PVC PIPES, BENDS, JUNCTIONS, TEES ETC. Supply, fitting and fixing PVC pipes of 6 kg/cm2 (Suprem/Princes) or other ISI approved including joining, ftting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (iv) 75mm dia.

PIPES & FITTINGS PVC PIPES, BENDS, JUNCTIONS, TEES ETC. Supply, fitting and fixing PVC pipes of 6 kg/cm2 (Suprem/Princes) or other ISI approved including joining, ftting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (vi) 50mm dia

Supply, fitting and fixing 87.5 degree PVC bend of (Suprem/Princes) or other ISI approved including joining, ftting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (v) 50mm dia.

Supply, fitting and fixing 45 degree PVC bend of (Suprem/Princes) or other ISI approved including joining, ftting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

iv) 75mm dia

(v) 50mm dia

Supplyment fitting and fixing PVC Plain single tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

(iv) 50mm dia

Supplyment fitting and fixing PVC Plain single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplyment fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm× 75mm

Supplyment fitting and fixing PVC single 'Y' of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplyment fitting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm× 75mm

COWEL Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make.

GRATING Providing fitting and fixing C.I. Grating to the floors complete as directed and specified. (ii) 110mm dia

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermel stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the clamps at 1.00m spacing. This includes joint of pipe. (A) Exposed or in trenches (Vertical in shaft & Terrace) e) 40 mm nomial outer dia pipe.

f) 50mm nomial outer dia pipe.

(B) Concealed pipe with cutting chases & making good the walls a) 15 mm nomial outer dia pipe.

(B) Concealed pipe with cutting chases & making good the walls b) 20 mm nomial outer dia pipe.

(B) Concealed pipe with cutting chases & making good the walls c) 25 mm nomial outer dia pipe.

(B) Concealed pipe with cutting chases & making good the walls d) 32 mm nomial outer dia pipe.

(B) Concealed pipe with cutting chases & making good the walls e) 40 mm nomial outer dia pipe.

(B) Concealed pipe with cutting chases & making good the walls f) 50mm nomial outer dia pipe.

VALVE Supplying and fitting gun metal country pit valve (full way valve) I.S.I Make ball as specified and directed. a) 50mm dia

b) 40mm dia

VALVE Supplying and fitting ball valve as specified and directed. a) 25 m dia (gun material)

WATER TANK Supplying and placing cylindrical vertical claused top (PCVC) tank of Sintex/Polycon/ Patton make over the stagging with manhole cover.. as required for inlet and outlet pipes. (i) 2000 Lt capacity (a) Sintex make

Providing and fixing SS floor clean out plug comprising of Upvc pipe, socket,elbow, extension piece caulked to pipe, complete as required. i) For 110mm dia pipe

SHOWER Supplying fitting and fixing CP (C.P.) shower 15mm dia. Of approved brand as directed and specified.(Pipes will be measured and paid seperately) Essco make (a) Casted shower arm heavy 190mm long with wall flange

HEALTH FAUCET Providing and fixing health faucet with 1.0 m PVC tube and swivel hook including all fittings complete.

GRAB BAR Fixing grab bar fabricated rom 32 mm dia seamless stainless steel tube in washroom facilities for physicaly handicapped, with non-slip griping surface complete including cutting and making good the walls and floors where required.

URINAL Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. A) Parryware make a) White (i) New Magnum (Cat. No.C0575)

DIVISION PLATE Supplying fiting and fixing vitreous china division plate including fitting and fixing complete as directed and specified. A) Parryware make a) White (i) Partion Magnum / Large (Cat. No.C0571/07)

Construction of Deep Tube well and Iron Filter

DETAILS ESTIMATE OF ELECTRICAL WORKS Wiring for light/fan/call bell point with 2×1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed conduit wiring system with 20mm dia rigid ISI marked Steel conduit pipe complete. 1.Short point up to 3.00 metre. length.

Wiring for light/fan/call bell point with 2×1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed conduit wiring system with 20mm dia rigid ISI marked Steel conduit pipe complete. 2.Medium point up to 6.00 metre. Length.

Wiring for light/fan/call bell point with 2×1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed conduit wiring system with 20mm dia rigid ISI marked Steel conduit pipe complete. 3.Long point up to 10.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed ISI marked Steel 20 mm. dia. conduit pipe wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. 1.Short point up to 3.00 metre. length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed ISI marked Steel 20 mm. dia. conduit pipe wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. 2.Medium point up to 6.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed ISI marked Steel 20 mm. dia. conduit pipe wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. 3.Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed ISI marked Steel 20 mm. dia. conduit pipe wiring system including earth continuity with 2.5 sq. mm. cable to the 3rd pin of the socket as required complete with 20mm. dia. Steel conduit (AKG or equivment as approved by the Deptt.) 1.Short point up to 3.00 metre. leng

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed ISI marked Steel 20 mm. dia. conduit pipe wiring system including earth continuity with 2.5 sq. mm. cable to the 3rd pin of the socket as required complete with 20mm. dia. Steel conduit (AKG or equivment as approved by the Deptt.) 2.Medium point up to 6.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed ISI marked Steel 20 mm. dia. conduit pipe wiring system including earth continuity with 2.5 sq. mm. cable to the 3rd pin of the socket as required complete with 20mm. dia. Steel conduit (AKG or equivment as approved by the Deptt.) 3.Long point up to 10.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in surface / recessed PVC conduit (Belia/ AKG/ Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Dept.) wiring system. With 2 × 1.5 sq. mm cable in 20 mm dia. 2mm thick/ haevy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Dept.) including earth continuity in suface/ recessed 20 mm. dia. 2mm thick/ haevy ISI marked IS: 9537 PART-III rigid PVC conduit wiring system. 1.With 2 × 2.5 sq. mm + earth continuity with 1×1.5 sq. mm in 20 mm dia. 2mm thick/ haevy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Dept.) including earth continuity in suface/ recessed 20 mm. dia. 2mm thick/ haevy ISI marked IS: 9537 PART-III rigid PVC conduit wiring system. 3.With 2 × 6 sq. mm + earth continuity with 1×4 sq. mm in 25 mm dia. 2mm thick/ haevy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR confirming to IS-694: 1990 with flexible bright annealed electrolyic copper conductor for volatage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/ Anchor or Equivement Make as approved by the Deppt.) in suface/ recessed 20 mm. dia. 2mm thick/ haevy ISI marked IS: 9537 PART-III rigid PVC conduit PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Dept.)wiring system. 5.With 4 × 16 sq. mm + earth continuity with 2×10 sq. mm in 40 mm dia. 2mm thick/ haevy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Richa, Bentec, Adhunic, V-Gaurd make) 1.4 way TPN (8+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Richa, Bentec, Adhunic, V-Gaurd make) 2.8 way TPN (8+24) double door

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneder MG, legrand, Hager make) 4 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneder MG, legrand, Hager make) 6 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneder MG, legrand, Hager make) 8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneder MG, legrand, Hager make) 12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, power painted dust & vermin proof revsible Double door IP-43 double door surface mounting horizental TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneder MG, legrand, Hager make) 4way TPN (8+12) double door

Supplying with fitting and fixing sinlgle Pole 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deppt. B Series (Schneider MG, legrand, Hager make) 1.6 to 32A

C Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing TP 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deppt. C Series (ABB,Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing TPN 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deppt. C Series (ABB,Schneider MG, legrand, Hager make) 63A

Supplying with fitting and fixing 30/100/300mA Sensitivity 240/415V 50 Hz 4P RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deppt. 30mA sensitivity 4P RCBO (ABB,Schneider MG, legrand, Hager make) 63A

Supplying with fitting and fixing 30/100/300mA Sensitivity 240/415V 50 Hz 4P RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deppt. 30mA sensitivity 4P RCBO (ABB,Schneider MG, legrand, Hager make) 20A

Supplying with fitting and fixing 30/100/300mA Sensitivity 240/415V 50 Hz 4P RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deppt. 30mA sensitivity 4P RCBO (ABB,Schneider MG, legrand, Hager make) 40A

Supply, installation 7 testing of Copper Plate earth station with 600 mmx×600 mm× 3 mm copper earth plate with necessary 40 mm dia G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50mn×40mm G.I. reducing socket for funnel including locking arrangement with 300 mm ×300 mm×+6mm C.I. hinged coveer plate complete with digging of both inner & outer surface of wall as specified and directed by the deppt.

Supplying with fitting and fixing 20 mm ×5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deppt.) with earth electrode G.I. stripts and Lightining Arrestor etc. as specified and direction by the deppt.

Supplying with fitting and fixing 20 mm ×3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deppt.) with earth electrode G.I. stripts and Lightining Arrestor etc. as specified and direction by the deppt.

Supplying & lying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

MODULAR SWITCH Supplying with fitting fixing of 6/10 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete, MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete, MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (VIOLA), MK (WRAPAROUND/PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including 100 watt electronic modular 4 step speed control 2 - module type

Supplying with fitting fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. 1. 1-2 module type Metal.

2. 3 module type Metal.

3. 4 module type Metal.

4. 6 module type Metal.

5. 8 module type Metal.

6. 9 module type Metal.

7. 12 module type Metal.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 1. 1 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 2. 2 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 3. 3 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 4. 4 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 5. 6 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 6. 8 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 7. 9 module.

Supplying with fitting fixing of following MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. 8. 12 module.

Supplying with fitting fixing of blank plate sinlge in modular switch system, MODEL RANGE LEGRAND (ARTEOAR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including fitting fixing of following A.C. Exhaust fan in the exixting hole on the wall of following sweeps with making necessary connection as approved by the Deptt.) as required complete and as directed by the Department. Ventilator DX 250 mm sweep Louver type (ORIENT make), Brick Air 250 mm sweep Louver type/ Trans Air 150 mm sweep (Croption make), Ventile Air DX 150 mm sweep Louver type (Havells make)

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.s etc. as required complete and as directed by the Department. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Enegy efficient 5- star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTION / Havells/ ATC or equivalent make.

Supplying, installation, testing and Commission of following luminaries complete with all accessories such as ballast, starter etc. mounting with necessary support with 1.5 sq.mm P.V.C. insulated S.C.copper conductor as required and as directed by the consultant. Philips TLED Battern BN 108C LED 20S PSU NW WH

Supplying, installation, testing and Commission of following luminaries complete with all accessories such as ballast, starter etc. mounting with necessary support with 1.5 sq.mm P.V.C. insulated S.C.copper conductor as required and as directed by the consultant. Model No DN395B LED 20S-4000 PSR WH

Supplying and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2×10 sq mm. 3×10 sq mm, 4×6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable U.C. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand coushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster /Finolex make) 3 & 12 Core A2XFY 300.00 Sq. mm.3 & 1/2 Core armoured U.G. cable.

FIRE EXTINGUISHER Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher conforming to IS 2171 with ISI mark and CO2 cartridge will be conforming to IS: 4947 with ISI mark, powder will be conforming to IS:4308. BRAND : FIRESTOP/FIREND/FIRE SHIELD.

Construction of Boundary wall, complete as directed and specified by the Department.

Erection of Signboard

Shri Kornoliush Basumatary