Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹16.8 L+₹4.6 L (37.8%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹20.0 L+₹7.8 L (64.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹20.5 L+₹8.3 L (68.6%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹21.2 L+₹9.1 L (74.4%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
19 May 2021, 6:00 pmClosed
GE SAMBA
GE SAMBA
REPAIR MAINTENANCE REPLACEMENT OF DBs TPN MCB MCCB EARTHING LIGHTANING CONDUCTOR ROOF LIGHTS AND CONNECTED WORKS UNDER AOR OF GE SAMBA
2021_MES_437571_1
GE/SMB/T-03/2021-22
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
Yes
GE SAMBA
₹60,000
Yes
8 Jul 2021
21 Apr 2021
21 May 2021
21 Apr 2021
19 May 2021
6 May 2021
21 Apr 2021 - 24 Apr 2021
Amount
Taking down old unserviceable Copper /Aluminium point wiring (light, fan, socket , power socket and bulk head fittings) from PVC/metalic conduit,on surface wiring, on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. by unscrewing carefully from boards etc complete all as specfied and directed.
Point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC concealed conduit with sunken box suitable for modular switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting, chiseling for concealed piping as required and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed . Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green) (Make of 1.5 sqmm copper wire: Havells / Finolex / Plaza / Grandlay, PVC conduit Make: Finolex/Plaza/Kamplast).
All as per srl item No 2 above but for Call bell point complete all as specified and directed.
All as per srl item No 2 above but for 3 pin 5 amps independent board complete all as specified and directed.
All as per srl item No 2 above but for 3 pin 5 amps on the same board with other switch complete all as specified and directed.
Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit with sunken box suitable for modular switches and sockets for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green) (Make of 2.5 sqmm copper wire: Havells / Finolex /Plaza / Grandlay, PVC conduit Make: Finolex/Plaza/Bajaj/Kamplast).
Modular switch 6A one way complete all as specified and directed,make: Havells(REO) or technocommerically equivalent make of Cona /SSK .
Modular switch 16A one way with indicator complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Modular socket 6A, 5 pin complete all as specified and directed. make : Havells (REO) or technocommerically equivalent make of Cona /SSK.
Modular socket 6A/16A 3 pin combined complete all as specified and directed,make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Modular exclusive front and back plate 1 module, make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Modular exclusive front and back plate 3 module, make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Modular exclusive front and back plate 4 module ,make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Modular exclusive front and back plate 8 module ,make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Modular exclusive front and back plate 12 module ,make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Bell push modular type 6A 1 module complete all as specified and directed,make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Electronic bell ding-dong AC 230 Volts single pole complete all as specified and diercted,make : Havells (REO) or technocommerically equivalent make of Cona /SSK.
Ceiling rose 65 x 50mm three terminals complete all as specified and directed, make : Havells (REO) or technocommerically equivalent make of Cona /SSK.
Modular ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed,make : Havells (REO) or technocommerically equivalent make of Cona /SSK .
Round shape 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable of 12 watts complete all as specified and directed of make : Havells, Cat Part No:EDGEPRORDDLR12WLED857S or technocommerically equivalant Crompton/Philips .
LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed ,make: Havells ,Cat Part No: LUMILINEBS9WLED865SPCWH, or technocommerically equivalant Crompton/Philips .
Ultra bright LED PLL lamp with high efficiency designed in polycarnate housing in opal finish with intergal AL heat sink to provide glare free uniform light distribution suitable of 18 watt,6500K compelte all as specified and directed of make: Havells, Cat Part No: LHLDEJNEUL8Z018 or technocommerically equivalant Crompton/Philips.
Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base of make : Havells, Cat Part No : LHFOAJE1TN1I060 or technocommerically equivalant Crompton/Philips .
LED tube light fitting 20 watt, 230 volt,box type complete bipin holders, connector,mounted on PVC block and retro LED rod of 20 watt with aluminium heat sink & polycarbonate diffuser having high efficacy (single side connection) complete with all accessories internally pre wired batten(single side connection) and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed,LED tube rod ,make :Havells ,Cat Part No: REGALBATTENT5UPTO1X22WSSBSWH and LED tube light batten ,make :Havells , Cat Part No :PHOTONULTRAE2.01213T8SSTL20WLED865SPC or technocommerically equivalant Crompton/Philips Note: (i) Contractor shall produce LM 79 & LM 80 test report form OEM owned NABL accredited laboraory. (ii) Contractor shall give gurantee of complete fitting/ fixtures for minimum of 5 years form the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of fittings/fixtures at no extra cost. (iv) Contractor shall arrange 70 % material at site for approval of GE before incorporation in the work.
Environmental friendly, ultra modern, energy seving, surface mounted, decorative hexagon Bulk head 10 watt back-lit LED luminaire comprissing of high brightness LEDs Cat Part No HEXAFT10WLED857SSYMBOPC of Havells or technocommerically equivalent Crompton/ Phillips.
Taking down the old /burnt service wire /connection form site and Providing 1100 volts grade ,ISI marked ,heavy duty cable PVC insulated solid aluminium conductor , served with inner sheathing of PVC tape and overall PVC Sheathed in service connections 16 sqmm 2 core aluminium conductor suspension by GI wire 4 mm dia and insulated hanger not more than 1 Mtrs apart etc complete.Make:Havells / Finolex /Plaza / Grandlay
Taking down the old /burnt service wire /connection form site and Providing 1100 volts grade ,ISI marked ,heavy duty cable PVC insulated solid aluminium conductor , served with inner sheathing of PVC tape and overall PVC Sheathed in service connections 10 sqmm 2 core aluminium conductor suspension by GI wire 4 mm dia and insulated hanger not more than 1 Mtrs apart etc complete.Make- Havells / Finolex /Plaza / Grandlay
Taking down the old /burnt service wire /connection form site and Providing 1100 volts grade ,ISI marked ,heavy duty cable PVC insulated solid aluminium conductor , served with inner sheathing of PVC tape and overall PVC Sheathed in service connections 6 sqmm 2 core aluminium conductor suspension by GI wire 4 mm dia and insulated hanger not more than 1 Mtrs apart etc complete.Make- Havells / Finolex /Plaza / Grandlay
Sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO (for incoming ) (b) MCB SP 06- 40 amps = 12 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series of Make : Schneider ,Cat Part No: A9HVD04L or equivalent make of L&T/ ABB/Legrand . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .
Sheet metal enclousre for TPN DBs 4 way when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts three pahse and neuton 4 way complete all as specified and directed,Make:Legrand or technocommerically equivalant Siemens/Schneider.
Sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 12 ways complete all as specified and directed, Make:Legrand or technocommerically equivalant Schneider /Siemens.
Sheet metal enclousre for DBs when MCB to be used double door powder coated factory made flush fixed complete with 200 amps rated bus bar 240 volts single phase 08 ways complete all as specified and directed, Make:Legrand or technocommerically equivalant Schneider /Siemens.
MCB TPN 40 to 100 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant Schneider /Siemens.
MCB SPN 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant Schneider /Siemens.
MCB SP 6 to 32 amps 240 Volt 'B' series complete all as specified and as directed,Make:Legrand or technocommerically equivalant Schneider /Siemens.
Taking down the unservicable /burnt sub main wiring from wooden batten and Providing submain wiring in and including PVC conduit 1.8 mm thick ,20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 4 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 4 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two runs of 4 sqmm plus one run 4 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 4 sqmm copper wire: Make- Havells / Finolex /Plaza / Grandlay
Taking down the unservicable /burnt sub main wiring from wooden batten and M & L for submain wiring in and including PVC conduit 1.8 mm thick ,20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 6 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 6 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble etc, complete all as specified and directed. (Two runs of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 6 sqmm copper wire: Havells or technocommerically equivalant Finolex /Plaza / Grandlay
Earthing complete with galvanised steel earth plate electrode, 600mm x 600mm x 6mm thick, buried directly in the ground (earth pit not less than 2.25m deep below normal (ground level) with top edge of the plate not less than 1.50m below ground level connected to galvanized iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15mm bore light grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt, 40mm thick pre-cast RCC (1:2:4) type B-0 (Nominal mix) cover reinforced with XPM (weighing n.less than 4 Kg/Sqm) with suitable steel handle, and angle iron 40X40X3mm frame and chamber of PCC (1:3:6) type C-0 (including earth work in any type of soil, removal of surplus soil to a distance n.exc.50m) and connecting, testing on completion, all as shown on electric plate No. 03 of SSR-2009 Part-I, complete all as directed. Notes: 1. Earth lead & protection pipes length upto & including 7.50 metre is included in the quoted rate. 2. Soil should be free from stone, boulders, aggregate, gravels etc.
Earthing complete with galvanized steel earth plate electrode 600x600x6mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized iron strip 32X6mm by means of nuts bolts,washers,check nuts of GI steel and including charcoal dust,salt etc and GI protection pipe medium grade 40mm and GI watering pipe 20mm light grade with funnel and wire mesh ,40mm thick pre-cast RCC N-15 (nominal mix) cover reinforced with XPM weight not less than 4 kg /sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover ,PCC M-15 (nominal Mix) pit,excavation and earth work in any type of soil and connected, Testing on complition, Complete all as specified and shown on Electrical Plate No 3 of SSR Part-1.
Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof and ground conductors and down conductors above ground complete all as spd and directed.
Galvanised iron strip 32 x 6mm buried in ground or on wall complete all as specified and directed.
Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed .
Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
GI pipe in replacement ( Light grade ) for protection of strip fixed to walls/ poles including suitable size clamps complete of size 40mm bore, all as specified and directed.
Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of aluminum strip of any size and getting out in hard and dense of soil complete all as specified and directed.
Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in hard and dense soil complete all as spd and directed.
Replcement of structural steel work conforming to grade Fe-410S as in cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections, including , nuts, bolts, washers, welding , bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat , one finishing coat of aluminium paint and epoxy coating sufficient complete all as specified and directed.
Round shape 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable of 15 watts complete all as specified and directed of make : Havells,Cat Part No:EDGEPRORDDLR15WLED840S or technocommerically equivalant Crompton/Philips .
Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base Upto 1 N x 20 W LED Lamp - Moon 200,make : Havells , Cat Part No : LHFXBON1TN6F035 or technocommerically equivalant Crompton/Philips .
Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base Upto 1 N x 9 W LED Lamp make : Havells , Cat Part No : LHFOECE1TZ1O014 or technocommerically equivalant Crompton/Philips .
Recess mounting LED 2X2 luminaire light fitting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm with suitable size of 40/42 watt complete as specified and directed at site. make:Cat Part No:VENUSNEOTW2X2PLR42WLEDTWMOD of Havells or technocommerically equivalent philips/crompton .
vishesh engineers
Jiwan Singh
G.M. ENGINEERING SERVICES
Kay Bee Traders
M/s Parv Enterprises
bamral builder
SIDDAHANT ENTERPRISES
M/S HIMANSHU BUILDERS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .