Construction of InCITE Building at Gujarat Biotechnology University

BILL OF QUANTITIES

Construction of Incite Building - Package C at GBU Gandhinagar Gujrat

Suresh Goel & Associates

C-85, Shivalik,

Abstract of Cost

GBU Gujrat - BOQ for Construction of Incite Building - Package C

Sl. No.Description Total Amount

Sl. No.Description Total Amount

2 Concrete Work

6 Wood Work & PVC Work

11 Aluminium Work

12 Waterproofing

13 Ext development

14 Plumbing Work

15 Fire Fighting Work

16 Electrical Work

18 Integrate BMS

Total (Excluding GST But including

Bill Of Quantities

GBU Gujrat - BOQ for Construction of Incite Building - Package C

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Sub- Head - I , Earth Work

Clearing and grubbing road including uprooting rank vegetation grass

bushes, shrubs , sapling and trees girth upto 300mm removal stumps of

trees cut earlier and disposal of unserviceable (D) By mechanical means

in area of thorny jungle.

Excavation for foundation upto 1.5m depth including sorting out and

stacking of useful materials , back filling in sides of sides of foundations

2 etc. in layers not exceeding 20cm .in depth consolidating each deposited 7153.00 cum 174.00 1.74 175.74

layer by ramming and watering etc and disposing off the excavated stuff

upto any lead and lift. Dense or hard soft soil

Excavation for foundation for a depth from 1.5m to 3.0m depth including

sorting out and stacking of useful materials back filling in sides of sides

of foundations etc. in layers not exceeding 20cm .in depth consolidating

3 each deposited layer by ramming and watering etc and disposing off the 6458.00 cum 186.58 1.87 188.45

excavated stuff upto any lead . (D)Dense or hard soft soil . Quantity for

excavation shall be paid based on actual dimensions in the drawings

Excavation for foundation for a depth from 3.0m to 5.0m depth including

sorting out and stacking of useful materials back filling in sides of sides

of foundations etc. in layers not exceeding 20cm .in depth consolidating

4 each deposited layer by ramming and watering etc and disposing off the 7977.00 cum 198.31 1.98 200.29

excavated stuff upto any lead . (D)Dense or hard soft soil . Quantity for

excavation shall be paid based on actual dimensions in the drawings

Excavation for foundation for a depth from 5.0 m to 6.0m depth including

sorting out and stacking of useful materials back filling in sides of sides

of foundations etc. in layers not exceeding 20cm .in depth consolidating

5 each deposited layer by ramming and watering etc and disposing off the 347.00 cum 219.21 2.19 221.40

excavated stuff upto any lead . (D)Dense or hard soft soil . Quantity for

excavation shall be paid based on actual dimensions in the drawings

Filling in plinth with (good quality) sand under floors including watering,

ramming, consolidating and dressing etc. complete.

Carring out plinth treatment to post construction / during construction by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Concentration Weight one

7 percent is recommended i.e one litre 20EC chemical emulsion with 19 liter 5430.88 sqm 104.90 1.05 105.95

give 1% concentration inclusive of one litre chemical emulsion appication

at the rate of 5Litre chemical / Sqm of surface is recommended as per I.S.

Plinth area only shall be measured for payment purpose.

TOTAL 0.00 0.00

Sub - Head - II , Concrete Work 0.00

Providing & laying cement concrete 1:3:6 (1: cement: 3 coarse sand:

machine crust stone aggregates 40 mm nominal size) for all depths below

8 and up to plinth level in foundations and curing etc. complete including 64.00 cum 3084.72 30.85 3115.57

cost of formwork in Footings & Ground, Plinth Beams & below Floors

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarsesand : 8-

hand broken stone aggregates 40 mm nominal size) and curing complete

including cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand :4-

10 graded stoneaggregates 20 mm nominal size) and curing complete 16.00 cum 3661.30 36.61 3697.91

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying damp proof course 100 mm thick cement concrete

1:2:4 (1- Cement: 2coarse sand: 4stone aggregate 10 mm nominal size)

11 and curing complete including providing and mixing water proofing 60.00 sqm 1249.77 12.50 1262.27

material in cement concrete in mix proportion recommended by the

Providing and filling in Aereated block bats (broken pieces ) in single or

multiple layers in super structure , filling the joints with sand mortar ( not

more than 20%)20mm thick cement sand mortar screed in proportion of

1:6 shall be laid asper drawing. Crushing strength of aerated concrete

block /bats shall not be less than 40 kg/sqcm, minimum density in dry oven

12 condition between 651 to 750 kg /cum, thermal conductivity shall not 88.00 cum 1675.00 16.75 1691.75

exceed 0.3W / mk, fire resistance 4 hours , in line and plumb , cleaning

the surface with tools and tackles , at all level, all height , all floors

including curing , scaffolding , complete as per specifications , drawings

and directed by engineer in charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 (

1cement:3 coarse sand:6 graded stone aggregate 20mm nominal size

over 75mm thick bed of dry brick ballast 40mm nominal size , well

rammed and consolidated and grouted with fine sand , including

necessary excavation, levelling and dressing & finishing the top smooth,

including toe wall 230mm wide and 450mm deep on the edge to plinth

protection with common burnt clay bricks including grouted with cement

mortar 1:4 (1cement:4 fine sand)

Sub - Head - III , RCC Work

Providing TMT Bar FE 500D reinforcement for RCC work including

bending, binding with G.I Binding wire and placing in position complete at

all heights, all lifts and all levels as shown in the drawing

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 410 kg ) for

Footing/Raft /grade slab upto plinth.

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 410 kg ) for

Beam upto Plinth.

Providing and laying in position machine batched and machine mixed

design mix M-450grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480 kg ) for

Columns, pillars Post Struts upto Plinth.

Providing and laying in position machine batched and machine mixed

design mix M-450grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480 kg ) for

Shear wall upto Plinth.

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 440 kg ) for

basement Wall upto Plinth.

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering

20 shuttering(height upto 4.2M) finishing and excluding reinforcement 531.04 cum 6379.25 63.79 6443.04

including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 410 kg ) for Slab /Shelves/ landing balconies,

access platform , staircase at Basement Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant including the cost of centering shuttering (height

upto 4.2M) finishing and excluding reinforcement including cost of

21 admixtures in recommended proportions as per IS: 9103 to accelerate/ 328.98 cum 6951.41 69.51 7020.92

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at Ground

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

22 (height upto 4.2M) finishing and excluding reinforcement including cost of 322.90 cum 6986.17 69.86 7056.03

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at First Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

23 (height upto 4.2M) finishing and excluding reinforcement including cost of 322.90 cum 7021.10 70.21 7091.31

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at Second

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

24 (height upto 4.2M) finishing and excluding reinforcement including cost of 322.90 cum 7056.21 70.56 7126.77

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at Third Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

25 (height upto 4.2M) finishing and excluding reinforcement including cost of 322.90 cum 7091.49 70.91 7162.40

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at Fourth

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

26 (height upto 4.2M) , finishing and excluding reinforcement including cost 163.35 cum 7126.94 71.27 7198.21

of admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410kg ) for beams/Cantilevers Girders Bressumers at Fifth Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

27 (height upto 4.2M) finishing and excluding reinforcement including cost of 163.35 cum 7162.58 71.63 7234.21

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at Sixth Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

28 (height upto 4.2M) finishing and excluding reinforcement including cost of 163.35 cum 7198.39 71.98 7270.37

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at seventh

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

29 (height upto 4.2M)finishing and excluding reinforcement including cost of 163.35 cum 7234.38 72.34 7306.72

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 475 kg ) for beams/Cantilevers Girders Bressumers at Eightth

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

30 (height upto 4.2M) finishing and excluding reinforcement including cost of 163.35 cum 7270.56 72.71 7343.27

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for beams/Cantilevers Girders Bressumers at Ninth Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering

31 shuttering(height upto 4.2M) finishing and excluding reinforcement 135.30 cum 7306.91 73.07 7379.98

including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 410 kg ) for beams/Cantilevers Girders

Bressumers at Terrace Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering

shuttering(height upto 4.2M) finishing and excluding reinforcement

including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 410 kg ) for Sill/ Lintels for all Floors.

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering

shuttering(height upto 4.2M) finishing and excluding reinforcement

including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 410 kg ) for RCC Band for all Floors.

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Columns, pillars Post Struts at Ground Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Columns, pillars Post Struts at First Floor

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Columns, pillars Post Struts at Second Floor

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Columns, pillars Post Struts at Third Floor

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Columns, pillars Post Struts at Fourth Floor

Providing and laying in position machine batched and machine mixed

design mix M- 400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460 kg ) for

Columns, pillars Post Struts at Fifth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460 kg ) for

Columns, pillars Post Struts at Sixth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460 kg ) for

Columns, pillars Post Struts at Seventh Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg ) for

Columns, pillars Post Struts at Eightth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460 kg ) for

Columns, pillars Post Struts at Ninth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg ) for

Columns, pillars Post Struts at Terrace Floor

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Wall / shear wall Ground Floor

Providing and laying in position machine batched and machine mixed

design mix M-450grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Wall / shear wall First Floor

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Wall / shear wall Second Floor

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Wall / shear wall Third Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-450 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 480kg ) for

Wall / shear wall Fourth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg ) for

Wall / shear wall Fifth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg ) for

Wall / shear wall Sixth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg ) for

Wall / shear wall Seventh Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg )for

Wall / shear wall Eightth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg )for

Wall / shear wall Ninth Floor

Providing and laying in position machine batched and machine mixed

design mix M-400 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

finishing and excluding reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 460kg ) for

Wall / shear wall Terrace Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering

54 shuttering(height upto 4.2M) finishing and excluding reinforcement 458.48 cum 6379.25 63.79 6443.04

including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 410 kg ) for Slab /Shelves/ landing balconies,

access platform , staircase at Ground Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering

55 shuttering(height upto 4.2M) finishing and excluding reinforcement 408.08 cum 6411.15 64.11 6475.26

including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 410 kg ) for Slab /Shelves/ landing balconies,

access platform , staircase at First Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

56 (height upto 4.2M) finishing and excluding reinforcement including cost of 414.33 cum 6443.20 64.43 6507.63

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Second Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

57 (height upto 4.2M) finishing and excluding reinforcement including cost of 409.33 cum 6475.42 64.75 6540.17

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Third Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

58 (height upto 4.2M) finishing and excluding reinforcement including cost of 409.33 cum 6507.80 65.08 6572.88

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Fourth Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

59 (height upto 4.2M) finishing and excluding reinforcement including cost of 202.25 cum 6540.33 65.40 6605.73

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Fifth Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

60 (height upto 4.2M) finishing and excluding reinforcement including cost of 202.25 cum 6573.04 65.73 6638.77

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Sixth Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

61 (height upto 4.2M) finishing and excluding reinforcement including cost of 202.25 cum 6605.90 66.06 6671.96

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Seventh Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

62 (height upto 4.2M) finishing and excluding reinforcement including cost of 202.25 cum 6638.93 66.39 6705.32

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Eightth Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

63 (height upto 4.2M) finishing and excluding reinforcement including cost of 202.25 cum 6672.13 66.72 6738.85

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Ninth Floor

Providing and laying in position machine batched and machine mixed

design mix M-300 grade concrete for reinforced cement conctere work

using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer

for any lead having continuous agitated mixer , manufactured as per mix

design of specified grade for RCC work including pumping of RMC from

transit mixer to site of laying including the cost of centering shuttering

64 (height upto 4.2M) finishing and excluding reinforcement including cost of 120.68 cum 6705.49 67.05 6772.54

admixtures in recommended proportions as per IS: 9103 to accelerate/

retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly

Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 410 kg ) for Slab /Shelves/ landing balconies, access platform

staircase at Terrace Floor

Extra for Additional height of proping and centering where the height of

65 propping and centering exceeds 4.2 m between supporting floor to ceilling 3338.00 sqm 573.30 5.73 579.03

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm

thick as per design for expansion joints.

Providing and fixing of expansion joint system related with floor

location as per drawings and direction of Engineer-In-Charge. The joints

system will be of extruded aluminum base members, self aligning / self

centering arrangement and support plates etc. as per ASTM B221-02. The

system shall be such that it provides floor to floor /floor to wall expansion

control system for various vertical localtion in load application areas that

accommodates multi directional seismic movement without stress to it’s

67 components. System shall consist of metal profiles with a universal

aluminum base member designed to accommodate various project

conditions and finish floor treatments. The cover plate shall be designed of

width and thickness required to satisfy projects movement and loading

requirements and secured to base members by utilizing manufacturer’s

pre-engineered self-centering arrangement that freely rotates / moves in

all directions.

The Self – centering arrangement shall exhibit circular sphere ends that

lock and slide inside the corresponding aluminum extrusion cavity to allow

freedom of movement and flexure in all directions including vertical

displacement. Provision of Moisture Barrier Membrane in the Joint System

to have watertight joint is mandatory requirement all as per the

manufactures design and as approved by Engineer -in- Charge . (Material

shall confirm to ASTM 6063.)

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Floor Joint of 100 mm gap 244.00 metre 5364.00 53.64 5417.64

Providing and fixing of expansion joint system related with wall joint

(internal/ external) location as per drawings and direction of Engineer-In-

Charge.The joints shall be of extruded aluminum base members, self

aligning / centering arrangement and support plates as per ASTM B221-

02. The material shall be such that it provides an Expansion Joints System

suitable for vertical wall to wall/ wall to corner application, both new and

existing construction in office Buildings & complexes with no slipping down

tendency amongst the components of the Joint System. The Joint System

shall utilize light weight aluminum profiles exhibiting minimal exposed

aluminum surfaces mechanically snap locking the multicellular to facilitate

movement.(Material shall confirm to ASTM 6063.)

Wall Joint of 100 mm gap 372.00 metre 4452.00 44.52 4496.52

Providing and fixing of expansion joint system of approved make and

manufactures for various roof locations as per approved drawings and

direction of Engineer-In-Charge. The joints shall be of extruded aluminum

base members with, self aligning and self centering arragement support

plates asper ASTM B221-02. The system shall be such that it provides

watertight roof to roof/roof to corner joint cover expansion control system

that is capable of accommodating multidirectional seismic movement

69 without stress to its components. System shall consist of metal profile that

incorporates a universal aluminum base member designed to

accommodate various project conditions and roof treatments. The cover

plate shall be designed of width and thickness required to satisfy

movement and loading requirements and secured to base members by

utilizing manufacturer’s pre-engineered self-centering arrangement that

freely rotates / moves in all directions.

The Self centering arrangement shall exhibit circular sphere ends that lock

and slide inside the corresponding aluminum extrusion cavity to allow

freedom of movement and flexure in all directions including vertical

displacement. The Joint System shall resists damage or deterioration from

the impact of falling ice, exposure to UV, airborne contaminants and

occasional foot traffic from maintenance personnel. Provision of Moisture

Barrier Membrane in the Joint System to have water tight joint is

mandatory requirement.Material shall confirm to ASTM

Roof Joint of 100 mm gap 22.00 metre 5022.00 50.22 5072.22

Constructing cast-in situ RCC diaphragm wall by providing and laying

machine batched, machine mixed, self compacting, ready mix reinforced

cement concrete, tramie controlled, of M 30 grade using minimum 400 kg.

cement per cum of concrete including providing and mixing required

admixtures in recommended proportions as per IS : 9103, as approved by

the Engineer-in-charge, for achieving 150- 200mm slump, for diaphragm

wall having thickness as per approved structural design not exceeding

mm, in pannels of required depth and lengths as per approved drawing,

including constructing necessary guide walls as required and as specified

including boring in all kinds of soils and rocks,including working in or

under water and / or liquid mud, in foul conditions and pumping or bailing

out of water and removing slush, including disposal of earth/ rock / slush

etc. for all leads and all lifts, including preparing,providing and re-

70 circulating bentonite slurry in the trench as and when required for all 207.00 cum 17168.00 171.68 17339.68

depths, including agitating bentonite slurry during trenching etc., providing

and fixing stop ends or form tubes, upto the required depth of diaphragm

wall including extracting the same after casting,including chipping off the

bentonite adulterated concrete or unsound concrete up to the cut off level

for obtaining the sound concrete, dressing undulations on the exposed

face of diaphragm wall after excavation by chipping / chiseling etc.

including filling the depression/ cavities with sound concrete etc. complete

and as directed by the Engineer-in-charge, including providing recess for

bearing plates and fixing insert boxes for inclined rock anchors etc.

complete as per the specifications and approved design and as directed

by the Engineer-in-charge, but excluding the cost of reinforcement and

Sub- Head IV - Brick Work

Brick work using common burnt clay building bricks having minimum

71 crushing strength not less than 35 kg/ sq cm in foundation and plinth in 135.00 cum 3981.21 39.81 4021.02

cement mortar 1 : 6 (1 cement : 6 fine sand)

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

72 laid with approved block laying polymer modified adhesive mortar all 701.94 cum 4483.73 44.84 4528.57

complete as per direction of engineer in charge and Technical

Specification . Ground Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

73 laid with approved block laying polymer modified adhesive mortar all 586.94 cum 4528.57 45.29 4573.86

complete as per direction of engineer in charge and Technical

Specification. 1st Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

74 laid with approved block laying polymer modified adhesive mortar all 586.94 cum 4573.85 45.74 4619.59

complete as per direction of engineer in charge and Technical

Specification. 2nd Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

75 laid with approved block laying polymer modified adhesive mortar all 586.94 cum 4619.59 46.20 4665.79

complete as per direction of engineer in charge and Technical

Specification. 3rd Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

76 laid with approved block laying polymer modified adhesive mortar all 586.94 cum 4665.79 46.66 4712.45

complete as per direction of engineer in charge and Technical

Specification. 4th Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

77 laid with approved block laying polymer modified adhesive mortar all 324.63 cum 4712.45 47.12 4759.57

complete as per direction of engineer in charge and Technical

Specification. 5th Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

78 laid with approved block laying polymer modified adhesive mortar all 324.63 cum 4759.57 47.60 4807.17

complete as per direction of engineer in charge and Technical

Specification. 6th Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

79 laid with approved block laying polymer modified adhesive mortar all 324.63 cum 4807.17 48.07 4855.24

complete as per direction of engineer in charge and Technical

Specification. 7th Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

80 laid with approved block laying polymer modified adhesive mortar all 324.63 cum 4855.24 48.55 4903.79

complete as per direction of engineer in charge and Technical

Specification. 8th Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

81 laid with approved block laying polymer modified adhesive mortar all 324.63 cum 4903.79 49.04 4952.83

complete as per direction of engineer in charge and Technical

Specification. 9th Floor

Masonary work using Aerated light weight concrete block having crushing

strength not less than 35 kg/sqcm for super structure above plinth level

82 laid with approved block laying polymer modified adhesive mortar all 25.60 cum 4952.83 49.53 5002.36

complete as per direction of engineer in charge and Technical

Specification. Terrace

Provinding and fixing chicken wire mesh of gauge 0.18mm and 200 mm

wide with necessary screws and nail at joints cracks of brick work R.C.C

work as per drawing and specification and direction of Engineer incharge.

TOTAL 0.00 0.00

Sub Head - V Marble/stone Work 0.00

Providing and fixing 18mm thick gang saw cut mirror polished

premoulded and prepolished) Granite of any colour and shade as per

selection of client for wall lining (veneer work), /bands 200mm wide

backing filled with a grout of average 12 mm thick in polymer modified

adhesive mortar including secured to the backing by means of cramps,

hold fastners ,copper pins 7.5 cm long 6 mm diameter for securing

adjacent stones in stone wall lining in adhesive mortar including making

the necessary chases complete in all respect.

Providing and fixing 18mm thick gang saw cut mirror polished premoulded

and prepolished) machine cut Granite of any colour and shade as per

selection of client for kitchen platforms, vanity counters, window sills

facias and similar locations of required size of approved shade, colour and

texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand) with joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish, providing opening of required size & shape

for wash basin/sink etc. complete at all levels.

Design, Supply & Fixing Marble stone sculptures with Size 6ft x 3.5ft x 2ft .

Providing & making individual pieces using laser cutting machine desired shape

and profile. All components of origami figure to be developed in 3d model hollow

from inside, thenlaser cut with proper dimensions and edges. Smoothening by

using machine and tools to get edge finish. using necessary tools and machinery

to get even and mirror like finishing in all respects. Designing, making and

86 approval of shop drawings of the entire ser good to be fabricated and assembled 1 each 349612.00 3496.12 353108.12

at site. Providing and finishing the sculptural Marble stones with mirror finish and

balanced flat surface to be kept at the site..Hardware items and Footing

Arrangement with plinth top Granite Finishing required in proper fixing of the mural

as per direction of Engineer-in-charge

87 Item Deleted 0.00

TOTAL 0.00 0.00

Sub- Head - VI Wood Work & PVC Work 0.00

Flush Door (Laminated ) Providing and fixing of 35mm solid cored flush

door with 1mm thick laminate in approved shade as per selection on

both side as shown in the drg. All exposed edges covered with wooden

liping of min 4mm th duly painted and finished matching shade of

laminate. Rate shall Include Frame of WPC 100x50 mm size comprising of

virgin PVC polymer of K value 58- 60 (Suspension Grade), , SS Handle,

Lock , Door Stopper, Door Closer, S.S. heavy duty hinges etc. all

materials and labour etc. complete as per detail drawing and instruction of

engineer‐in charge and consultant.

Flush Door (Laminated ) Providing and fixing of 35mm solid cored flush

door with 1mm thick laminate in approved shade as per selection on

both side as shown in the drg. All exposed edges covered with wooden

liping of min 4mm th duly painted and finished matching shade of

laminate. Rate shall Include SS Handle, Lock , Door Stopper, Door

Closer, S.S. heavy duty hinges etc. all materials and labour etc. complete

as per detail drawing and instruction of engineer‐in charge and consultant.

Providing and fixing M.S. grill of required pattern of windows etc. with

M.S.. flats at required spacing and frame alround square or round headed

90 bolts and nuts or by screws.including applying a priming coat of red lead 24949.00 kg 100.17 1.00 101.17

paint and two coats of oil painting etc complete (A) Plain grill

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Restroom Cubical: providing and installing premium Series Restroom

Cubicles with all necessary tools hardware, labour, as per the company

specs.Providing & Fixing Cubicle partition system for toilet by using

following Materials 12mm thick compact laminate with core of phenol resin

treat papers with black color top layer treated with special melamine resin.

Adjustable legs with bottom cap of SS 316, door lock with, gravity hinges

with cover – combination of mild steel and Nylon PA6And used following

Accessories Accessories Include: 1. AlumuniumTop Rail (Stainless Steel

Grade 304 with Satin Finish)2. SS Coat Hook with Door Stopper Option

(Stainless Steel Grade 304 with Satin Finish)3. SS Gravity Hinges

(Stainless Steel Grade 304 with Satin Finish)4. SS Latch cum Occupancy

Indicator (Stainless Steel Grade 304 with Satin Finish)5. SS “U” Channel

(Stainless Steel Grade 304 with Satin Finish)6. SS “F” Channel (Stainless

Steel Grade 304 with Satin Finish)7. SS Palm Design Adjustable Foot

(Stainless Steel Grade 304 with Satin Finish)8. SS Screws &

Inserts(Stainless Steel Grade 304 with Satin Finish) 9.Rubber Lining for

Door Stopper Brand.

Providing and fixing Hollow metal fire rated doors shutter with frame and

hardware fittings etc complete as per specifications.Door frame shall be

double rebate profile of minimum size 154mm X 77 mm made out of

1.60mm minimum thick galvanized steel sheet. The frames should be

finished with Thermosetting Powder Coating in desired RAL Shade. All

provision should be mortised, drilled and tapped for receiving appropriate

hardware. Frames should be provided with back plate bracket and anchor

fasteners for installation on a finished plastered masonry wall opening.

Door leaf shall be minimum 49mm thick fully flush double skin door with or

without vision lite. All doors NSD 12049 shall be factory prepped for

receiving appropriate hardware and provided with necessary

reinforcement for hinges, locks, and door closers. For pair of doors

astragals has to be provided on the meeting stile for both active and

Providing and fixixng of 6mm thick decorative compact HPL laminate as

per EN 438-6Type EDS ( Exterior Durable Standard)/ EGS(External

General Standard) external wall clading using specially treated acrylic

resins under high pressure and temperature and hardened into sheets,

93 thus providing all weather protection and UV resistance on an aluminium 590.00 sqm 4646.00 46.46 4692.46

powder coated sub structure of aluminium cube chanel having thickness

50x25x1.6mm at corner and 75x25x1.6mm at junction of two panels

complete as per manufacturers specifications and direction of engineer in

Providing and fixing of approximately 8.0mm thick Laminated wooden

flooring, classification of use 31/23 with a surface abrasion resistance of

class AC3 (average 3800 cycles), impact resistance of 7.7 mm,resistance

to cigarette burn with a rating of 4(EN 438-2:05), swelling after 24 hrs in

water of 8.22%, Modulus of rupture of 53.3 newton/mm2, Internal bond

1.78 newton/mm2, surface soundness 2.62 newton/mm2(EN 13329:2000)

with a 0.2 mm thick wear layer on top of a High Density Fiber substrate

core (density ~ 948.3 Kgs/M3) of plank size 1285/1215 mm X 191/192 mm

having locking arrangement (lock strength > 670 lbs/ft) with an

underlayment made of natural colour foam , with accessories like End

profile, Transition profile, reducer, Stair nosing etc. complete.

Providing and fixing GI Gyp steel ultra frame work for wall panelling as

per design drawing consisting of floor channel of size 50x32x32 x0.5mm

thick at bottom and top fixed with 35 mm nylon sleeves and 35 mm screw.

Further fixing GI stud 48x34x36x0.5 mm thick @600mm C/C vertically. The

framework to be filled with 50mm 1000GSM non-woven thermal bonded

polyester wadding ( Make Dupont/ mikasha/vibrant) held in position with

18 mm GI checken mesh of 24SWG with drive all screws and oversize

95 washers. Finally fixing over it horizontally 80x26x51x0.5 mm thick G.I. Gyp 2413.00 sqm 1640.00 16.40 1656.40

ceiling section placed @600mm C/C or wherever required as per design

drawings. The frame to be fixed to the walls by means of angle holdfasts

or cleats of required size complete with expandable anchor fasteners of

65x10mm dia fixed on each vertical member @1000mm C/C .The work

shall be executed as per drawings ,specifications & instructions of

engineer in charge.

Providing & fixing at all heights on walls Wood based slats laminated

panels having NRC upto 0.75 with lineal perforations . The size of lineal

panels is 2400 x 128x 16mm with a pitch of 16 mm. The slats to have a

groove of 2mm. The back panels to have circular perforations (8-10mm)

dia randomly with a non wooven fabric covering of 0.2mm. The lineal

96 panels to have tounge & groove joints and fixing arrangements for 2413.00 sqm 4293.00 42.93 4335.93

seamless continuity . The panels to be fixed on the GI framework with

impalers as per manufacturers recommendations ( The GI framework to

be payable Separately ). The work to be done complete as per detail

drawing and instruction of engineer‐in charge and consultant.

Providing and fixing 12 mm thick frameless toughened glass door shutter

of approved brand and manufacture, including providing and fixing top &

bottom pivot & spring type fixing arrangement and making necessary holes

etc. for fixing required door fittings, all complete as per detail drawing and

instruction of engineer‐in charge and consultant.

TOTAL 0.00 0.00

Sub- Head - VII , Steel Work 0.00

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot ,tubular 'T','I" section, angle, plate ,beam, channel section,

Bar , hollow box or Z purlins , for built up purlins, roof trusses, columns,

side runners, tie beams, sag rods, base plates gusset plates, cap plates,

bearing bracing, gantry girders, rails, require support,pipes, including all

welded or bolted steel structures of various types with approved I.S.I.mark

electrodes, bolts, anchor bolts including cost of thread, Anchor plate cleats

etc. in RCC or masonry work, including cutting, bending, welding ,fixing,

supplying , Fabricating Decorative fevisted section or any structured

98 member required to complete the job for Trusses, Canopy, doors, Frame, 371820.81 kg 83.33 0.83 84.16

Railing, Entrance gate, pergola, Decorative hanging light , for Electrical,

water supply and HVAC structure New window, parking shed or space

frame or any other required specified area as shown on drawing and

detailed specification or as per design incl. three coats of approved brand

primer and two coats of paints, necessary scaffolding, tools tolerance etc.

complete as directed by Engineer In Charge. (Payment will be made for

weight of metal used in the work) (Work for all the floors/all heights)

Design, manufacture and installation of 12 mm dpi system, a complete

assembly of extruded Multi / Micro cellular profile UV extruded/protected

polycarbonate panels incorporated into a complete system. The

Polycarbonate panel system consists coextruded UV protected Multi /

Micro cellular structure polycarbonate panel with width of 1040 mm to

ensure best performance for wind uplift, vibration, oil canning and visual

appearance. Panels shall be manufactured with vertical standing seam

with standing seam height of 10 ‐ 15mm at both sides of the panel. Panels

shall be fixed on Purlins with the Z ‐ Type Stainless Steel

Fastener/retention clips and connectors. Each fastener shall be min 1mm

thick of SS 304 Grade and secured to supporting frame/structure with min

99 3 numbers of self‐drilling screws so that the Pull Out Load of Fastener 82.00 sqm 2255.00 22.55 2277.55

exceeds 7000 N (7 KN) when tested as per ISO 6892: 1998 and IS 1608:

2005. Snap‐on connectors to interlock the panels shall have 2‐4 teeth

grip‐lock locking mechanism to ensure maximum uplift capability. Panel

shall be fixed with additional End cap/Aluminum U / F Profile / Glazing Bar

(mill finish) for ends as required. Panel shall be fixed over structural steel /

MS purlin (paid separately) by trained & factory authorised installer under

direct supervision to complete entire project installation according to the

detail technical specifications as per approved architectural drawings all

complete as per detail drawing and instruction of engineer‐in charge and

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railingwith

necessary accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-in charge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts,fasteners etc.

TOTAL 0.00 0.00

Sub- Head - VIII Flooring 0.00

Providing and laying mirror polished Kota stone slab flooring over 20mm

(Average ) thick base of cement mortar1:6 (1-cement:6-coarse sand)laid

101 over and jointed with grey cement slurry mixed with pigment to match the 1243.00 sqm 982.83 9.83 992.66

shade of slab including rubbing and mirror polishing etc.complete.(A)

25mm thick(work for all the floors)

Providing and laying mirror polished kota stone slab 25mm thick in risers

of steps,skirting Dado and pillars laid on10mm thick cement mortar 1:3 (1-

102 Cement :3 coarses and) and jointed with gray cement slury mixed with 168.00 sqm 1176.03 11.76 1187.79

pigment to match the shade of slab including rubbing and mirror polishing

etc. complete.(work for all the floors)

Providing & laying Light & Dark Colored Polisehd Granite slab (18mm

thick) flooring For Staircase Tread,Landing over 20 mm (average) thick

base of Cement Mortar (1‐Cement : 6‐Sand) using cementitious Adhesive

Materials as per EIC instruction. Granite slab shall be laid and jointed with

103 grey cement slurry. The size of granite should be in full leght of Riser and 11333.00 sqm 2577.00 25.77 2602.77

Tread as per design. Rates are including rubbing, polishing Moulding

/Rounding of edges, making two lines of Grooves on each tread for

antisleep, laying and removing of floor protection sheet etc. complete.

(work for all the floors)

Providing & laying Granite slab (18mm thick ‐ river wash) in riser of steps

dedo, Skirting and pillars laid 15 mm thick Cement Mortar 1:3 (1Cement:3

Coarse Sand) using cementitious Adhesive Materials as per EIC

104 instruction. Granite slab shall be jointed with the Grey Cement Slurry 1960.00 sqm 2577.00 25.77 2602.77

Rates are including rubbing, polishing Moulding / Rounding of edges,

laying and removing of floor protection sheet etc. complete.(work for all the

Providing and laying minimum 8-9 mm thick Double Charged Vitrified

tiles Matt/Antiskid finish of size 600mmx600mm in floor / skirting

(thickness to be specified by the manufacturer) with water absorption less

than 0.08%and conforming to IS:15622, of approved brand &

manufacturer, in all colours and shade, laid with cement based high

polymer modified quick set tile adhesive (water based) conforming to IS :

15477, in average 6 mm thickness, including grouting of joints The tiles

must be cut with the zero chipping diamond cutter only . Laying of tiles will

be done with the notch trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles gently and easily.

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying minimum 8-9 mm thick Double Charged Vitrified tiles

Matt/Antiskid finish of size 800mmx800mm in floor / skirting (thickness to

be specified by the manufacturer) with water absorption less than

0.08%and conforming to IS:15622, of approved brand & manufacturer, in

all colours and shade, laid with cement based high polymer modified

quick set tile adhesive (water based) conforming to IS : 15477, in average

6 mm thickness, including grouting of joints The tiles must be cut with the

zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

107 and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3- 266.00 sqm 908.17 9.08 917.25

coarse sand ) finishing with flush pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and

108 dedo on 10mm thick cement plaster 1:3 (1-cement : 3- coarse sand) and 8357.00 sqm 1044.23 10.44 1054.67

jointed with white cement slurry

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement, including cement

slurry, but excluding the cost of nosing of steps etc. complete. i)40 mm

thick with 20 mm nominal size stone aggregate

Providing and laying C.C. pavement of mix M-25 with ready mixed

concrete from batching plant. The ready mixed concrete shall be laid in

panels and finished with screed board vibrator , vacuum dewatering

process and finally finished by floating, brooming with wire brush etc.

complete as per specifications and directions of Engineer-in

charge.Cement content considered in this item is @ 380 kg/cum.

Providing & laying of ITF Certified Acrylic Synthetic sports surfaces

including 7MM SBR with single component PU binder, manually laying on

the existing concrete surface, sealer of PU material for sealing of vide in

SBR layer, 2 layers of top coat ITF classified Techno Court, White Line

marking complete as per detail drawing and instruction of engineer‐in

charge and consultant.

Providing and fixing Glass mossaic tiles on finished plain floor surface and

wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in

customize design as per direction of Engineer-in- Charge. The glass

mosaic tiles to be fixed on the wall surface with the help of approved

adhesive applied at the rate of 2.5 kg per sqm and grouting of the same.

The rate is inclusive of all operation, material and required pattern

complete as per detail drawing and instruction of engineer‐in charge and

Cutting holes in RCC wall , slab by diamond core cutting machine upto

113 150mm dia for passing drain pipes etc and repairing the hole after 150 each 379.00 3.79 382.79

insertion of drain pipe etc with GP2 grout.

TOTAL 0.00 0.00

Sub- Head - IX Roofing 0.00

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having thermalconductivity0.043° w/m KC.for the

best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine

fissured/ Spintone /Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC

or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steelsections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’runner suitably spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’

of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along space etc. An

additional 4mm thick PVC strip of 40mm width is to be stuck on the interior side of the C

channel using PVC solvent adhesive complete as per direction of Engineer in

charge,manufactures.s at the back side so that ‘L’ shape outer PVC beading can be removed

whenrequired for replacement of broken glass etc. complete as per direction of etc. complete

as per direction of Engineer in charge and manufactuture’s specification.icationntre with 25mm

long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight

calcium silicate ceiling tiles of approved texture (Fine Fissured /Cosmos /Spintone) in the grid

including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke

114 detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. 9415.80 sqm 1632.63 16.33 1648.96

slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’bottom exposed with 24mm of all T-sections

shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings

and as directed by engineer-in charge.Note:- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)

having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of

(Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity.0.043° w/m KC.for the best thermal Insulation

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing & fixing false ceiling at all height including providing & fixing of

framework made of special section, power pressed from M.S. sheets and

galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS :

and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of

27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash

fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I chanels

x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section

0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having

lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I

intermediate channel with connecting clip made out of 2.64mm dia x 230mm long

G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm

high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/

partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall

screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling

115 section and perimeter channels with the help of dry wall screws of size 3.5 x25mm 6277.20 sqm 1501.00 15.01 1516.01

at 230mm c/c, including jointing & finishing to a flush finish of tapered and square

edges of the board with recommended jointing compounds, jointing tapes,finishing

with jointing compounds in three layers covering up to 150mm on both sides of

joints and two coats of primer suitable for boards, all as per manufacture's

specification and also including the cost of making opening for light fittings, grills,

diffusers, cut outs made with frame of perimeter channels suitably fixed, all

complete as per drawings, specificaton and direction of the Engineer in charge but

excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with

Calcareous & Siliceous materials reinforced with cellulose fiber

manufactured through autoclaving process.

Providing & fixing Armstrong Vertical Linear Baffle Ceiling made out of

Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall

be in size of 100x 50mm in WHITE/BLACK/WOOD GRAIN finish –

Pradoo & Cabrueava. The baffle blade shall be suspended using Slotted

116 U-profile at on-center spacing . Longer lengths of Baffle to be connected by 1156.00 sqm 5085.00 50.85 5135.85

Baffle Joiner and the ends to be fixed with End caps.

Baffle Ceiling 200mm c/c.complete as per detail drawing and instruction of

engineer‐in charge and consultant.

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%,Thermal

Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt -

6 &7)in true horizontal level suspended on interlocking T-Grid of hot

dipped all round galvanized iron section of 0.33 mm thick (galvanized

@120 gsm) comprising of main T runners of 15x32 mm of length

mm, cross T of size 15x32mm of length 1200 mm and secondary

intermediate cross T of size 15x32 mm of length 600 mm to form grid

module of size 600x600 mm suspended from ceiling using galvanized mild

steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash

fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length

and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm

centre to centre along main ‘T’. The system should rest on periphery walls

/partitions with the help of GI perimeter wall angle of size24x24X3000 mm

made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic

rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws.

The exposed bottom portion of all T-sections used in false ceiling support

system shall be pre-painted with polyester baked paint, for all heights. The

work shall be carried out as per specifications, drawings and as per

directions of the engineer-in-charge. With 20 mm thick beveled tegular

mineral fibre false

ceiling tile (NRC 0.7)

TOTAL 0.00 0.00

Sub- Head - X Finishing 0.00

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

118 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 5049.27 sqm 152.15 1.52 153.67

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - Basement Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

119 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 5542.24 sqm 159.76 1.60 161.36

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - Ground Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

120 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 4873.24 sqm 167.75 1.68 169.43

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - First Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

121 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 4573.24 sqm 176.14 1.76 177.90

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - Second Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

122 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 4605.68 sqm 184.95 1.85 186.80

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - Third Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

123 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 4605.68 sqm 194.20 1.94 196.14

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - 4th Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

124 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 2487.50 sqm 203.91 2.04 205.95

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - 5th Floor

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

125 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 2437.50 sqm 214.11 2.14 216.25

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - 6th Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

126 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 2437.50 sqm 224.82 2.25 227.07

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - 7th Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

127 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 2437.50 sqm 236.06 2.36 238.42

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - 8th Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

128 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 2437.50 sqm 247.86 2.48 250.34

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - 9th Floor

Providing 10 mm thick Cement Plaster in single coat on brick/concrete

Ceiling for interior plastering finished even and smooth in(i) Cement

129 mortar 1:3 (1‐cement :3‐ sand) as required to receive specified 189.00 sqm 260.25 2.60 262.85

architectural finish (like Grooves, pattern if any, drip mould etc.) to correct

line, plumb .etc - Terrace Floor

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

130 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 2045.25 sqm 155.61 1.56 157.17

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

131 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 9030.66 sqm 163.39 1.63 165.02

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

132 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 7275.66 sqm 171.56 1.72 173.28

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

133 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 7275.66 sqm 180.14 1.80 181.94

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

134 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 7275.66 sqm 189.15 1.89 191.04

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

135 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 7275.66 sqm 198.61 1.99 200.60

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

136 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 4024.10 sqm 208.54 2.09 210.63

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

137 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 2012.05 sqm 218.97 2.19 221.16

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

138 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 2012.05 sqm 229.92 2.30 232.22

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

139 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 2012.05 sqm 241.42 2.41 243.83

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15 mm thick Cement Plaster in single coat on brick/concrete

wall/ for interior plastering finished even and smooth in(i) Cement mortar

140 1:4 (1‐cement :4‐ sand) as required to receive specified architectural finish 2012.05 sqm 253.49 2.53 256.02

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

Providing 15mm thick Cement Plaster in single coat on brick/concrete wall/

for interior plastering finished even and smooth in(i) Cement mortar 1:4

141 (1‐cement :4‐ sand) as required to receive specified architectural finish 128.00 sqm 266.16 2.66 268.82

(like Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc -

20mm thick Double coat Sand Faced / Mala cement plaster on Exterior

walls at for various floors, levels and height as below and shown in the

drawing consisting of 12mm thick backing coat of C.M. 1:3 (1‐cement

142 :3‐sand) and 8mm thick finishing coat of C.M. 1:2 (1‐cement :2‐sand) etc. 8735.55 sqm 297.68 2.98 300.66

complete. as required to receive specified architectural finish like Vata,

Grooves, pattern if any, drip mould etc. to correct line, level and plumb .

Providing 20mm thick cement plaster in single coat on single wall for

basement wall/ under plinth exterior surface in cement mortar 1:3 (

143 1cement: 3sand) including providing and mixing water proofing material in 100.00 sqm 226.92 2.27 229.19

cement mortar work in doses by weight of cement as per manufacturer

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Wall painting (Three coats) with plastic emulsion paint of approved brand

& manufacture on under coated wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Painting two coats (excluding priming coat) on new steel and other metal

surface with syntheticenamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Providing and applying acrylic aggregate textured non pigmented wall

finish coating in 100% natural/ non pigmented Crushed Stone finish,

dispersed in a pure acrylic binding medium, incorporating anti cracking,

anti rusting, defoamers, antifungal compound followed by trowel/ spray

gun application in approved shade and pattern or brick pattern with an

average thickness of 1.75-2.0 mm, product finally sealed with protective

top coat as per sample approved by Engineer-in-charge on the exterior

walls of the building.

TOTAL 0.00 0.00

Sub- Head - XI , Aluminium Work 0.00

Providing and fixing of Anodised Aluminium (Matt finish) frame work as per IS

1868 (1996)(Horizontal and verticals , Styles and rails, ball bearing) for Doors/

window/ventilation/alluminum partition with required Domal sections including

fixing all items and hinged / pivoted arrangements for operation of shutters and

labour cost for fixing of door fittings and locks including all items and

contingencies described above complete (Aluminium beadings and glazing clips &

section measured under this item only) NOTE : All fitting works shall be carried

out as per I.S. specifications including cost of necessary rivets, screws, lugs,

scaffolding, rubber gaskets etc., complete all generally as per drawings. The sizes

of the components should confirm as per details in drawings. Providing and fixing

at all heights / in all floors with all leads. Colour Anodised Aluminium doors /

windows / partitions manufactured from best extruded Aluminium sections

confirming to ISI cut to length, joints mitred and corners grinded with joints water

proof the outer frame and shutter frame stiffened with corner angle and strips

provided for in the frame for fixing the frame to R.C.C Columns / masonry/Granite

Frame on sides, R.C.C lintels/Granite Frame on top and P.C.C sills or floor at

148 bottom, the frame work fixed with standard approved fastenings all generally as 18732.15 kg 415.00 4.15 419.15

per details shown in drawings and specification with all the sections pretreated for

removal of any rust & scales and prevention of further rust/scale formation and

coated with greasy materials for non-adherence of mortar or any other sticky

materials and this coat to be removed after installations 1)Sheet metal screws,

wool pile and aluminium angle corner cleat of required thickness and of full width,

etc. for assembling the frame and shutter; 2)Glazing clips for receiving infill panel

for Double Glazed Unit (DGU), any type of Glass, Compact Sheet, Louvers; 3)

Best quality wool pile where ever shutter touches the frame; 4) Anchor fasteners

for fixing the frame assembly to the RCC or Granite or masonry surfaces etc.

Note:-As per drawings and design supplied by architect and instruction given by

authority and E.I.C.

Providing and fixing double glazed hermetically sealed glazing in

aluminium windows, ventilators and partition etc. with 6 mm thick clear

float glass both side, having 12 mm air gap, including providing EPDM

gasket, perforated aluminium spacers, desiccants, sealant (Both primary

and secondary sealant) etc. as per specifications, drawings and direction

of Engineer-in-charge complete

Providing and fixing fly proof stainless steel grade 304 wire gauge, to

windows and clerestory windows using wire gauge with average widthof

150 aperture 1.4 mm in both directions with wire of dia. 0.50 mm all 1235.31 sqm 1030.00 10.30 1040.30

complete.with Aluminium beading

Supply of Aluminium Ventilated Façade / Louver System of approved

colour consisting of panel 50 mm wide x 50mm depth x 0.6mm thick panel

length up to 5mtrs coil coated on a continuous paint line double baked and

roll formed from enameled corrosion Resistance Aluminum Alloy AA3005 /

AA5050 for higher strength and good Roll forming characteristics. Panels

shall be mounted in a module of 100 mm on a mullion profile grooved

(Slotted Fastening Profile) by means of Clamp, Locking Pop and Pop Rivet

(Gap will be 50 mm between two panels). Slotted Fastening Profile shall

be fixed at 150 mm from panel ends and at a distance of maximum

mm center to center across the panel span and in any height and Slotted

Fastening Profile shall be fixed to a suitable sub-structure by means of

Square Brackets.Paint Finish:Panel shall be stove enamelled and finished

with Luxacote, a patented special three layered coating system (consisting

of first a conversion layer of thickness 800-2000mg/sq mtr, a polyurethane

basecoat of 16-20 microns, and a special top coat of polyamide particles

of 8-12 microns thick to provide excellent abrasion and damage

resistance) in a continuous coil coating process of the approved colour on

the exposed side and the reverse side with epoxy.

152 Item Deleted

Designing, fabricating, testing, protection, installing and fixing in position

semi(grid) unitized system of structural glazing with IGUs comprising of

hermetically sealed 6-12-6 mm insulated glass (double Glazed) and

Aluminium section complete as per specification

TOTAL 0.00 0.00

Sub- Head - XII , Water Proofing 0.00

Providing and laying of minimum 1.5 mm thick SBS modified self adhesive

Samshield XL or equivalent waterproofing membrane topped with samshield

HDPE valeron film, having tensile strength of L/T 3.5N/mm2 as per ASTM D412

and with minimum elongation L/T of 180% (as per ASTM D 412). The membrane

shall have puncture resistance of >200 N (as per ASTM E154). Hydrostatic

pressure > 60 m (6BAR) No leakage as per DIN 1048, including cleaning the

surface,priming the surface with cold applied bituminous primer@4-6 sqmtr/litre,

154 properly sealing the joints & maintaining 75 mm overlap between the membrane 1713.00 sqm 630.00 6.30 636.30

selvedge & 100 mm overlap on the end joints of the membrane over the slab etc.

The system includes base preparation of cleaning, brushing and removal of flacky

materials, grouting the porous area with cementitious grout, proper coving

between slab and wall junctions. The waterproofing system should be applied

directly by the manufacturer approved applicator with 10 years of warranty against

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Supplying and laying composite 1.5mm thick, pre-applied, fully bonded HDPE

membrane with double side adhesive which results in adhesive-to-adhesive bond -

Prebond Pro or equivalent over P.C.C. conforming to BS 8102 & IS 16471:2017,

requirements of UG waterproofing structures, with the turnkey execution to be

done by the manufacturer through its in-house subsidiary execution company and

with 10 years composite warranty against leakages, to be provided by the principal

manufacturer. The system should be fully bonded to the Raft and consists of highly

resilient HDPE film, self-adhesive polymer layer and weather protective layer.

Typical application includes surface preparation by removing loose aggregates

from PCC, foreign material, cleaning the surface etc., cutting membrane to

convenient length, carefully aligning the membrane over blind concrete and rolling

it out with print coated side facing up, laying adjacent sheets by keeping overlap of

75 mm, end overlaps to be treated using double sided tape and sealed tape

etc.The membrane shall be continued over the vertical surface upto top of the Raft

and fixed to shutter using double side adhesive tape. For application on confined

retaining walls membrane shall be continued over the vertical surface and fixed by

PVC roundels / shot guns at selvedge portion. The membrane shall have Tensile

strength > 25 Mpa as per ASTM D 412 Modified, Elongation > 500% as per ASTM

D 412 Modified, Puncture resistance > 1000 N as per ASTM E 154, Hydrostatic

head resistance > 70m head of water as per ASTM D 5385,Low Temperature

Flexibility: -25 deg C, Lap Peel Adhesion-880 N/m as per ASTM D1876, Peel

Adhesion to Concrete > 1500 N/m as per ASTM D 903 Modified, UV Exposure >

Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C kitchen and the like consisting of :

i) Ist course of appying cement slurry @ 4.4 Kg/sqm mixed with water

proofing compound conforming to IS 2645in recommended proportions

including rounding off junction of vertical and horizontal surface.ii) IInd

course of 20 mm cement plaster 1: 3 (1 cement :3 coarse sand) mixed

with water proofing compound in recommended proportion including

roudnign off junction of vertical and horizontal surface. iii) IIIrd course of

applying blown or residual bitument applied hot at 1.7 kg. per sqm of

area.iv) IVth course of 400 micron thick PVC sheet. ( Overlaps at joints of

PVC sheet should be 100 mm wide and pasted to each other with bitument

Terrace Waterproofing Works : Providing and applying single

component PU based cold applied seamless waterproofing membrane

over the primed surface with PU/Epoxy primer Layer on RCC mother slab,

Insulation Layer: Spray applying an average minimum 65mm thick GRIHA

enlisted CFC & HCFC free spray applied polyurethane foam and 2 coats

of a single component PU based cold applied seamless waterproofing

membrane over PU foam , 150 gsm Geotextile (non-woven polyester)

over the entire membrane on horizontal areas maintaining proper overlaps

and an avg of 100 mm thick M20 grade PP fiber reinforced concrete

screed with Min. 75 mm thick at the rain water outlets, laid to a slope of 1 :

120, including saw cuting (approx 6mm W x 30mm D) at 3MX4M pannels

within 24 hours of concrete placement and filling the groove with

Expanded Polytheylene backer rod keeping the top approx 10 mm depth

open and sealing the groove on the top after 28 days of concrete

placement with PU sealant or equivalent, and making angle fillet of

100mmX100mm using M20 grade concrete at the corners, compaction

curing for 7 days etc complete

TOTAL 0.00 0.00

Sub Head XIII - External development 0.00

Preparation and consolidation of sub grade with power road roller of 8 to

12 tonne capacity after excavation earth to an average of 22.5cm depth

158 dressing to camber and consolidating with road roller including making 2969.00 sqm 184.00 1.84 185.84

good the undulations etc. and re-rolling the sub grade and disposal of

surplus earth lead upto any lead.

Construction of granular Sub base providing coarse graded material,

spreading in uniform layers with motor grader on prepared surface mixing

by mix in place method with front end loader at OMC and compacting with

159 vibratory roller to achieve the desired density, complete as per 625.00 cum 2336.00 23.36 2359.36

specification and direction of engineer in charge- With material

conforming to Grade - I (size range 75mm to 0.075mm ) having CBR

Construction of dry lean cement concrete sub base over a prepared sub-

grade with coarse and fine aggregate conforming to IS:383, the size of

coarse aggregate not exceeding 25 mm, aggregate cement ratio not to

exceed 15:1, aggregate gradation after blending to be as per

specifications, cement content not to be less than 150 Kg/cum, optimum

160 moisture content to be determined during trial length construction, 445.00 cum 3481.00 34.81 3515.81

concrete strength not to be less than 10 Mpa at 7 days, mixed in a

batching plant, transported to site, for all leads & lifts, laid with a

mechanical paver, compacting with 8-10 tonne vibratory roller, finishing

and curing etc. complete as per direction of Engineer in- charge.

Providing and fixing pre-cast Rubber Dye/ steel Dye interlocking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed/

vibrated mechanically and as per approved design Confirming to

IS15658:2006 including 35mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

Providing and Fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

162 concret as per approved design and including excavation for fixing in 1212.00 metre 376.43 3.76 380.19

proper line and level ,filling the joint with C:M 1:3(1cement:3 fine sand) etc

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and laying design mix cement concrete of M-30 grade, in roads/

taxi tracks/ runways, using cement content as per design mix, using

coarse sand and graded stone aggregate of 40 mm nominal size in

appropriate proportions as per approved & specified design criteria,

providing dowel bars with sleeve/ tie bars wherever required,laying at site,

spreading and compacting mechanically by using needle and surface

vibrators, levelling to required slope/ camber finishing with required

texture, including steel form work with sturdy M.S. channel sections,

curing, making provision for contraction / expansion, construction &

longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine,

providing and filling joints with approved joint filler and sealants, complete

all as per direction of Engineer-in-charge (Item of joint fillers, sealants,

dowel bars with sleeve/ tie bars to be paid separately). Cement content

considered in M-30 is @ 410 kg/cum. Cement concrete manufactured in

automatic batching plant (RMC plant) i/c transportation to site in transit

Parking Signs :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 60 x 60cms. sequare plus 60 x 20cms rectangular

additional plate as as per the design of IRC-67-1977 pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint;reflectorised with retro refiective

sheeting as per latest M.O.S.T.Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm

75x75x6mm as required;painted with best quality epoxy coatings in black

and white bends.the details of symbol for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60cms. for each leg. including excavation curing

etc.complete under the supervision of engineer in charge.(A) Engineer

Providing and fixing retro Reflective Engineering grade Board using

C.R.C. (M.S.) Sheet 2mm, angle iron 75 x 75 x 6mm. Descaling and

degreasing the board as per requirement using epoxyprimer epoxy paint

and carrying retro reflactive process by screen painting as directed etc.

complete including transporting and fixing in C.C. 1:4:8 with necessary

excavation curing etc. complete as per I.R.C type design.(A) Engineer

Facility Informatory Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 80 x

60 cms rectangular as per design of IRC-67-2012.Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron angle of 35 x 35 x

166 3mm; painted with bestquality epoxy coatings in black and white bends. 6 each 5848.00 58.48 5906.48

The details of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x

45 x 60 Cms. for each leg.including excavation, curing etc.complete under

the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro

Reflective sheeting

Painting road surface marking with adequate nos of coats to give uniform

finish with ready mixed road marking paint conforming to IS : 164, on

167 bituminous surface in white/yellow shade, including cleaning the surface of 59.00 sqm 158.00 1.58 159.58

all dirt, scales, oil, grease and foreign material etc.complete. New work

(Two or more coats)

Earthwork for embankment including breaking clods,dressing with all lead

and lift and including watering rolling and consolidation of subgrade in

168 layers at O.M.C.to required dry density including filling the depression 4500.30 cum 171.95 1.72 173.67

which occur during the process using power roller 8Tto10T. (E) From

Borrow area within all lead.

Supplying and stacking at site dump manure from approved source,

169 including carriage (manure measured in stacks will be reduced by 8% for 87.00 cum 254.15 2.54 256.69

payment) : Screened through sieve of I.S. designation 20mm

170 Fine dressing of the ground 2321.00 sqm 3.70 0.04 3.74

Spreading of sludge, dump manure and / or good earth in required

171 thickness as per direction of Engineer -in-charge (Cost of sludge, dump 783.00 cum 52.35 0.52 52.87

manure and / or good earth to be paid separately).

Mixing earth and sludge or manure in the required proportion specified or

directed by the Engineer -in-charge.

Grassing with selection No.1 grass including watering and maintenance of

the lawn for 30 days or more till the grass forms a thick lawn, free from

weeds and fit for mowing including supplying good earth, if needed -With

Preparation of beds for hedging and shrubbery by excavating 60 cm deep

and trenching the excavated base to a further depth of 30 cm, refilling the

excavated earth after breaking clods and mixing withsludge or manure in

the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% :

one part of stacked volume of sludge or manure after reduction by 8%),

174 flooding with water, filling with earth if necessary, watering and finally fine 50.00 cum 222.85 2.23 225.08

dressing, leveling etc.including stacking and disposal of materials

declared unserviceable and surplus earth by spreading and leveling as

directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge,

manure or extra earth to be paid for separately).

Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free

from weeds having proper roots in green including loading, unloading,

carriage and all taxes paid etc.and as per direction of Engineer - in -

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

177 serviceable materilas and disposal of unserviceable materials with all lead 94.00 cum 544.95 5.45 550.40

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

178 serviceable materilas and disposal of unserviceable materials with all lead 2374.00 sqm 47.25 0.47 47.72

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Dismentling steel work including distempering and stacking the materials

with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M.

Carefully removing the existing interlocking paver blocks of any thickness,

including stacking the serviceable paver blocks at site; disposing of

unserviceable materials; preparing the sub-base including dressing,

182 leveling, compacting, and relaying/re-fixing the paver blocks in proper line 2374.00 sqm 350.23 3.50 353.73

and level with required compaction; filling joints with sand; and completing

the work as directed by the Engineer-in-Charge.

Shifting relocating and re-routing of existing building services falling within

the proposed building construction area, including Diesel Generator (DG)

sets, Transformers, HT/LT panels,pump room equipment, UGT/Panel

rooms, and other associated MEP services; complete in all respects. The

183 work includes safe shutdown, disconnection, transportation, re-installation 1 LS 500000.00 5000.00 505000.00

at the designated location, , supply of required hardware, supports,

accessories, testing and commissioning, and restoration of affected

surfaces; all as per direction of the Engineer-in-Charge

Sub Head – Plumbing Work

Providing and fixing white vitreous china wall mounting water closet of size

64X35.5X38.5 cm of approved shape including providing & fixing cistern

184 with dual flush fitting, of flushing capacity 2 litre/ 4 litre (adjustafle to 4 95 each 10629.00 106.29 10735.29

litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete Make -20151-Hindware.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan)

185 size 580mm (Earthwork, bed concrete, foot reste and trap to be measured 2 each 926.10 9.26 935.36

and paid for separately) (A) Vitreous China.(I) Long pattern = White colour

Providing and fixing Handicap toilet consisting of 1 no. EWC with vitreous

10 litre capacity dual flushing system cistern with 1 no. hinged rail of

186 cm, 1 no. wash basin with all fittings and bottle trap, with one pair of 11 each 39697.00 396.97 40093.97

mounting brackets and 4 nos. grab rails, 1 no. tower ring and 1 no. paper

holder all complete as per the manufacturer's specification

187 Providing and fixing toilet paper holder.(A) C.P. Brass 106 each 414.53 4.15 418.68

Providing and fixing white vitreous china battery /Electice based infrared

sensor operated urinal of approx. size 29X 32.5X 57.5 cm having pre &

post flushing with water (250 ml & 500 ml consumption), having water inlet

from back side, including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge. ( cat No

Hindware- 60021)

Providing and fixining frameless urinal partition with 8 mm glass , full

189 height upto 3 feet, 1 feet deep & SS fittings approved make all complete 21 each 4767.00 47.67 4814.67

as directed by the Engineer-in-Charge.

Providing and fixing white vitreous china wash basin under counter basin

of size 630x450mm, with including 32 mm CP brass waste coupling,

including painting of fittings and brackets, cutting and making good the

walls wherever required all complete

Providing and fixing CP brass auto closing system basin pillar tap of

Jaquar PRS - 031 or Equivalent as approved by Engineer- In Charge

Providing and fixing chromium plated, bottle trap with necessary couplings

of approved quality for wash basin

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white

193 including cutting holes in walls and making good the same but excluding 6 each 2257.69 22.58 2280.27

fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing white vitreous china laboratory sink with C.I. brackets,

C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P.

194 brass trap with necessary C.P. brass unions complete, including painting

of fittings and brackets, cutting and making good

the wall wherever required :

195 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 87 each 67.24 0.67 67.91

196 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. 46 each 88.94 0.89 89.83

197 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 87 each 77.97 0.78 78.75

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(TypeB) conforming to IS13592-1992 with one end plain and othe rend

socketed with rubberring, & fittings conforming to ISI14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x149mm length x145mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

Providing, laying and jointing in true line and level 75 diametre U.P.V.C

(TypeB) conforming to IS13592-1992 with one end plain and othe rend

socketed with rubberring, & fittings conforming to ISI14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 75 mm diametre x149mm length x145mm heigh at every

2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

Providing and fixing cast iron spigot and socket soil, waste and ventilating

pipes of the following nominal size.(B) 75mm dia.

Providing and fixing cast iron spigot and socket soil, waste and ventilating

pipes of the following nominal size.(C) 100mm dia.

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

202 Providing and fixing in position cowel went to pipes.(B) 75mm dia. 18 each 385.88 3.86 389.74

203 Providing and fixing in position cowel went to pipes.(C) 100mm dia 27 each 496.90 4.97 501.87

Providing and fixing SWR floor drain consisting of 100x63mm PVC

204 elbow (grating and SWR pipe to be paid separately), complete as per 85 each 144.00 1.44 145.44

instructions.(C) 100mm dia.

Supply and fixing of SWR Plain / Multi Floor Trap of `P' , "S" or `Q' type

and 110 mm outlet complete, including cost of materials, labour, HOM of

machinery & equipments with all lead and lifts, loading and unloading

charges, transportation cost and conveyance, all other incidental charges

etc. complete for successful completion of work as per specifications, and

as directed by Engineer -in- Charge. 110mm inlet and 110 mm outlet

Painting two coats (excluding priming coat) on external surface of new rain

water, soil, waste and vent pipes and fittings with ready mixed bituminous

brushing, black, anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

Painting two coats (excluding priming coat) on external surface of new rain

water, soil, waste and vent pipes and fittings with ready mixed bituminous

brushing, black, anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (C) 100mm dia.

Providing and fixing 125 mm square S/S grating (with or without

hole)for floor or Nahani trap.

Providing and fixing C.P soap dispenser with all complete as directed by

the Engineer-in-Charge.

Providing & fixing C.P. brass towel ring all complete with required

210 acceessories as directed by the Engineer-in-Charge. Towel Ring Round 17 each 750.13 7.50 757.63

with Round Flange (Make -Jaquar Cat no- ACN-1121BN).

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing and fixing stainless steel hand dryer (Heavy Traffic ) all

complete as directed by the Engineer-in-Charge.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

spacing.This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

a 65 mm dia nominal bore 145.00 metre 1491.00 14.91 1505.91

b 80 mm dia nominal bore 20.00 metre 1893.00 18.93 1911.93

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

222 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 107 each 825.48 8.25 833.73

wooden pluge with C.P. brass screws and washers.

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) :

Providing and fixing Gun metal check or non-return fullway wheel valve.(B)

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E)

Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) :

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

a) 50 mm dia. nominal bore 3 each 861.43 8.61 870.04

b) 65 mm dia. nominal bore 2 each 1461.78 14.62 1476.40

Supply ,Erection , Testing & Commissioning of Automatic water level

control panel & related accessories for pumping automation with

228 consisting of automatic water level controller , level sensor with stainless

steel probe, motorized butterfly valve, motorized valve controller with

complete in all respect.

upto 50 mm dia. nominal bore 5 each 67496.00 674.96 68170.96

Providing and fixing Stainless steel braided connection pipe with brass

unions :45 cm length and 15 mm dia

230 Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap 304 each 504.00 5.04 509.04

Providing and fixing hand held ablution fitting (health faucet) with one

231 meter long flexible tube and wall hook, all complete approved engineer-in- 95 each 705.00 7.05 712.05

Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and

232 suitable length CP brass extension pipe all of approved engineer-in- 97 each 1276.00 12.76 1288.76

Providing and fixing Sink Cock with swinging casted spout ( cat. No. LYR

38347 equivalent ) of approved quality

Supply Installation Testing Commissioning of water Cooler with all

required accessories to complete the job including appropriate Prefilter

with its housing and Pipe at the inlet of water cooler appropriate Level

Sensor for Water Cooler for switching UV Lamp as direction of

Engineering in charge.The details as below:

Minimum Storage Capacity 80L, Minimum Cooling Capacity 150L/Hr,No of

faucets 01+01 nos ( 1 Normal,1 Cool),Front Tray drain pipe system,

Hermetically sealed reciprocating compressor having R-134 a

refrigerant,Cabinet Material Stainless steel AUG J1 grade,Stainless Steel

Water Tank with float type sensor, Warranty on Cooler and other parts:

Minimum 1 years,Supply Volatge-230 V AC,Make of the water Cooler-

Voltas/ Blue Star/ Aquaguard / Usha

After installation the agency should submit the test report of functioning of

all its parts like Float Sensor,Cooling etc. The Unit and its accessories

should be leackage free during the warranty period,any leackages found

during warranty period agency should attend it on their own cost.

Providing and fixing Stainless Steel pipe and fitting of grade 316L as per

IS 6911:2017 and conforming to EN-10312 standards complete with press

type fitting (fitting shall be paid for separately) i/c fixing of the pipe with

235 clamps at 1.00 m spacing including cutting and making good the walls

including testing of joints complete as per direction of Engineer-in-charge.

(The pipe length inserted in the fitting shall not be measured for payment)

Inernal work - Exposed on wall

a 22 mm outer dia pipe 20.00 metre 719.88 7.20 727.08

b 28 mm outer dia pipe 16.00 metre 897.05 8.97 906.02

c) 35 mm outer dia pipe 16.00 metre 1244.84 12.45 1257.29

d 42 mm outer dia pipe 50.00 metre 1498.62 14.99 1513.61

Providing and fixing Stainless Steel pipe and fitting of grade 316L as per

IS 6911:2017 and conforming to EN-10312 standards complete with press

type fitting (fitting shall be paid for separately) i/c fixing of the pipe with

236 clamps at 1.00m spacing and also including cutting of chases and making

good the walls including testing of joints complete as per direction of

Engineer -in-charge. (The pipe length inserted in the fitting shall not be

measured for payment)

Internal work - Concealed Pipe

a 15 mm outer dia pipe 20.00 metre 639.37 6.39 645.76

b 22 mm outer dia pipe 20.00 metre 863.36 8.63 871.99

Providing and fixing required Stainless Steel Fitting of press fit design of

grade 316L as per IS 6911:2017 and conforming to EN-10312 standards

with V-profile and with O-ring sealing gasket of EPDM material of required

dia as per direction of Engineer-in-charge.

Coupling/Socket

a For 22 mm outer dia pipe 10 each 303.11 3.03 306.14

b For 28 mm outer dia pipe 8 each 353.62 3.54 357.16

c) For 35 mm outer dia pipe 8 each 443.45 4.43 447.88

d For 42 mm outer dia pipe 25 each 600.60 6.01 606.61

Providing and fixing required Stainless Steel Fitting of press fit design of

grade 316L as per IS 6911:2017 and conforming to EN-10312 standards

with V-profile and with O-ring sealing gasket of EPDM material of required

dia as per dirction of Engineer-in-charge.

For 22mm x 15 mm outer dia pipe 10 each 286.25 2.86 289.11

Providing and fixing required Stainless Steel Fitting of press fit design of

grade 316L as per IS 6911:2017 and conforming to EN-10312 standards

with V-profile and with O-ring sealing gasket of EPDM material of required

dia as per direction of Engineer-in-charge.

Female Thread Connector/ Adapter

For 15 mm outer dia x 1/2" mm nominal dia threaded 10 each 493.96 4.94 498.90

Providing and fixing required Stainless Steel Fitting of press fit design of

grade AISI 304 conforming to JWWA G116 standard with V-profile or M-

profile and with O-ring sealing gasket of EPDM material of required dia as

per direction of Engineer-in-charge.

Valve Connector

a For 22.22 mm outer dia x 15 mm nominal dia threaded 20 each 314.31 3.14 317.45

b For 22.22 mm outer dia x 20 mm nominal dia threaded 20 each 348.00 3.48 351.48

c For 28.58 mm outer dia x 25 mm nominal dia threaded 10 each 477.09 4.77 481.86

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part -

2 ) 3013 for soil / waste pipe under ground drainage system with jointed

241 with rubber ring with good quality lubricant for fittings, inclusive of all

necessary specials like bends, tees, offsets, junctions, etc complete.

a 150 mm diameter 80.00 metre 496.00 4.96 500.96

b 200 mm diameter 263.00 metre 665.00 6.65 671.65

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(C) 250mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-

coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone

245 aggregate 20mm nominal size) finished smooth complete including curing 20 each 10920.76 109.21 11029.97

and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I.

cover with frame size 560mm diameter total weight of cover and frame to

be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry using brick having crushing

strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-

Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-

oarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-

coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1- Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm

diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-

coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1- Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep

including C.I. cover with frame size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for

150mm diameter sewer.

(A) With 230mm thick walls of brick msonry using brick having crushing

248 strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5- 3 each 29952.74 299.53 30252.27

Coarse sand) (4) D type depth 3.15 Metre for 150mm diameter sewer

(I) Extra rate for constructing B.B. masonry for every additional depth of

0.1M. or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M.

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and

painting with two coats of Anti-corrosive paint etc. complete.

Constructing Brick masonry road gully chamber 500mm x 450mm x

251 600mm including 500mm x 450mm C.I. horizontal grating wih frame 26 each 1997.22 19.97 2017.19

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

External water supply

Providing and fixing brass ferrule with C.I. mouth cover including boring

and tapping the main :

25 mm nominal bore 3 each 408.46 4.08 412.54

Providing and fixing of cast iron sluice valves ( with cap ) complete with

254 bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid

a 100 mm diameter

b 150 mm diameter

Providing and fixing C.I. double acting air valve of approved quality with

255 bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc if

required will be paid separately) :

Providing and fixing G.I. pipes complete with G.I. fittings including

trenching and refilling etc.

a 65 mm dia nominal bore 35.00 meter 752.31 7.52 759.83

b 80 mm dia nominal bore 36.00 meter 874.06 8.74 882.80

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and fixing HDPE pipes,PE-63 8kgf/cm2 to IS confirming IS 4984-

1995 having thermal stability for hot & cold water supply including all

257 threaded fittings. This includes jointing of pipes & fittings with one step

HDPE solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.

25 mm nominal outer dia pipe 35.00 metre 137.00 1.37 138.37

32 mm nominal outer dia pipe 20.00 metre 164.00 1.64 165.64

50 mm nominal outer dia pipe 20.00 metre 267.00 2.67 269.67

75 mm nominal outer dia pipe 10.00 metre 484.00 4.84 488.84

100 mm nominal outer dia pipe 20.00 metre 925.00 9.25 934.25

Constructing masonry Chamber 30x30x50 cm inside, in brick work in

cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in cement

concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

258 aggregate 20 mm nominal size), i/c necessary excavation, foundation

concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate

40mm nominal size ) and inside plastering with cement mortar 1:3 (1

cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat

cement complete as per standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation

Rain Water Harvesting & Tubewell

Boring/drilling fore well of required dia for casing/ strainer pipe, by suitable

method prescribed in IS: 2800 (part I), including collecting samples from

difberent strata, preparing and submitting strata chart/ fore log, including

hire & running charges of all equipments, tools, plants & machineries

required for the job, all complete as per direction of Engineer -in-charge,

upto 90 metre depth below ground level.

All types of soil

Boring/drilling fore well of required dia for casing/ strainer pipe, by suitable

method prescribed in IS: 2800 (part I), including collecting samples from

difberent strata, preparing and submitting strata chart/ fore log, including

hire & running charges of all equipments, tools, plants & machineries

required for the job, all complete as per direction of Engineer -in-

charge,beyond 90 metre depth below ground level.

All types of soil

Supplying, assembling, lowering and fixing in vertical position in bore well,

ERW (Electric Resistance Welded) FE 410 mild steel screwed and

socketed/plain ended casing pipes of required dia, conforming to IS:

261 of reputed & approved make, including painted with outside surface with

two coats of anticorrosive paint of approved brand and manufacture,

including required hire & labour charges, fittings & accessories, all

complete, for all depths, as per direction of Engineer-in-charge.

200 mm nominal size dia having minimum wall thickness 5.40 mm 425.00 metre 2049.63 20.50 2070.13

Supplying, assembling, lowering and fixing in vertical position in bore well,

ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of

size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe

(type A) of required dia, conforming to IS: 8110, of reputed and approved

262 make, having wall thickness not less than 5.40 mm, including painted with

outside surface with two coats of anticorrosive bitumestic paint of

approved brand and manufacture, ncluding hire & labour charges, fittings

& accessories, all complete, for all depths, as per direction of Engineer -in-

200 mm nominal size dia 425.00 metre 2157.28 21.57 2178.85

Supplying, filling, spreading & leveling stone boulders of size range5 cm to

263 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all 7.95 Cum 1266.82 12.67 1279.49

complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to

mm, in the recharge pit, over the existing layer of foulders, in required

thickness, for all leads & lifts, all complete as per direction of Engineer-in-

Supplying, filling, spreading & leveling coarse sand of sizerange 1.5 mm to

265 2 mm in recharge pit, in required thickness over gravel layer, for all leads 7.95 Cum 1290.69 12.91 1303.60

& lifts, all complete as per direction of Engineer -in-charge.

Gravel packing in tubewell construction in accordance with IS:

including providing gravel fine/ medium/ coarse, in required grading &

sizes as per actual requirement, all complete as per direction of Engineer-

Providing and fixing factory made precast RCC perforated drain covers,

having concrete of strength not less than M-25, of size 1000 x 450x50 mm,

reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional

T.M.T. hoop fars, including providing 50 mm dia perforations @ 100 to

mm c/c, including providing edge finding with M.S. flats of size 50 mm x

1.6 mm complete, all as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS:

11189, to establish maximum rate of usable water yield without sand

content (beyond permissible limit), with required capacity air compressor,

running the compressor for required time till well is fully developed,

measuring yield of well by “V” notch method or any other approved

method, measuring static level & draw down etc. by step draw down

method, collecting water samples & getting tested in approved laboratory,

i/c disinfection of tubewell, all complete, including hire & labour charges of

air compressor, tools & accessories etc., all as per requirement and

direction of Engineer-in-charge.

Providing and fixing M.S. clamp of required dia to the top of

269 casing/housing pipe of tubewell as per IS: 2800 (part I), including

necessary bolts & nuts of required size complete.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of

pipe assemfly of tubewell as per IS:2800 (part I).

STP / WATER TREATEMENT EQUIPMENT & SUPPLY PUMPS

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Design, Construction ,Supplying, installing, testing & commissioning of

Sewage Treatment Plant of 50m3/day based on MBR technology

(Excluding excavation, back filling & disposal of surplus earth MS / Civil

construction work) for the following duty:

Nature of Sewage - Domestic Sewage from Kitchen, Pantry and human

waste for STP and from lab fro ETP.

The sewage treatment plant shall include the following items: Screen

Chamber,Oil & Grease Trap,Reaction Tank,Clear Water Tank,Sewage

equalization tank/sump,,Aeration Tank,,Sludge Holding Tank,Air Blowers,

Pump sets & other equipment including submersible pumps in the

drainage sump,Effluent,Sludge,,Tertiary Treatment,Irrigation, Flushing &

Soft water pumpsets,Inlet and Outlet connection to Treated water storage

Tanks,Electrical Control Panel & Cabling, earthing etc.,Piping, valves and

Instrumentation including level controllers, pressure gages, sensors,

rotameters and indicating cum recording meters for incoming sewage and

outgoing treated effluents etc.,Contractor shall ensure submission of

detailed GA drawings (Plan & Section), P&I diagram, schematic diagram

for the above said components and equipment and additional component if

so required for the complete working of the STP /ETP. The following list of

civil units shall be in Client's Scope. However the size and design of the

civil constructions required shall be given and guaranteed for its efficacy

by the contractor for which the contractor shall take full responsibility, Bar

screen pit, Oil & Grease Chamber,Equalisation Tank,Sewage

equalization tank/sump, Anoxic Tan,Aeration Tank,Sludge Holding Tank,

Final Traeted water tank,Drain Sump for STP room,The STP shall consist

of following units but not limited to these unit as may be required by the

manufacturer's design.

The STP shall be designed based on the following parameters:

Daily average flow : 50 m3/Day

BOD5 : 50- 80 mg/l

S. Solids : 50- 80 mg/l

COD : 50- 80 mg/L

Oil & Grease : 20-30mg/L

ELECTRICAL INSTALLATION FOR SEWAGE TREATMENT PLANT

Note : The mentioned ratings are for estimation purpose it may change as

per final technical submittal. The Vendors are advised to quote as per

actual. Design, fabrication, assembling, wiring, supply, installation, testing

and commissioning of motor control centre shall be fabricated out of

gauge CRCA sheet steel in form in 3b formation with reinforcement of

suitable size angle iron, channel ‘T’ sections irons and /or flats wherever

necessary. Cable gland plates shall be provided on top as well as at the

bottom of the panels. Panels shall be treated with all anticorrosive process

before painting as per specifications with 2 coats of red oxide primer and

final approved shade of powder coated paint. 2 Nos. earthing terminals

shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks

shall also be provided in case of large panels. Approval shall be taken for

each panel before fabrication. Cadmium Plated hardware shall be used in

fabrication of panels. Quoted rates shall inclusive of cables, cable trays,

control cabling, earthing (in accordance to specification) with earthing from

panel to each motor / equipment. MCC –1 (Sewage Treatment Plant)

Incoming 100 amps TPN MCCB with the following accessories: - 1 No

STP Describe as above item with complete in all respect.

Sub Head XX : Fire Fighting System

Supplying, installing, testing and commissioning of flooded Vertical Inline

cetrifugal pump set with stainless steel body , stainless steel impller and

SS shaft capable to deliver of following capacity and head. given by TFC

squirrels induction motor suitable for operation on 415 volt , 50 HZ AC

power supply running speed 2900 RPM .The installation shall be complete

with all necessary ancillaries & accessories including base plate , coupling

guard etc complete as required.

Flow rate : 150 LPM

Required for : UG T ( Domestic Water & Flusing Water ) 4 set 80557.98 805.58 81363.56

Supply, installation, testing and commissioning of continuous duty

submersible centrifugal non-clogging drainage pumps complete with

phase motor with all necessary protection and mechanical seal etc.

complete with all ancillaries etc required.

Flow rate : 100 LPM

Solid Handling : 10 – 12 MM

Purpose : Drainage

Supply, installation, testing & commissioning of electric driven main fire

274 pump suitable for automatic operation and consisting of following:

complete in all respect as required.

Horizontal type, multistage, centrifugal, split casing pump of cast iron body

& bronze impeller with stainless steel shaft, mechanical seal to ensure a

minimum pressure of 3.5 kg/sp.cm. at highest and farthest oulet at

specified flow of 2850 lpm at 88M. head conforming to IS

Suitable HP SQ cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

Suitable cement concrete foundation duly plastered with anti vibration

Supplying, Installation, Testing and Commissioning of diesel engine driven

275 main fire pump suitable for automatic operation and consisting of

following: complete in all respect as required.

Horizontal type, multistage, centrifugal, split casing pump of cast iron body

& bronze impeller with stainless steel shaft, mechanical seal to ensure a

minimum pressure of 3.5 kg/sp.cm. at highest and farthest oulet at

specified flow of 2850 lpm at 88M. head conforming to IS

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Suitable HP, 1500 RPM water cooled with radiator, diesel engine

conforming to relevant BS & IS standard complete with auto starting

mechanism, 12 volts/24 Volts electric starting equipment, sealed

maintenance free batteries, Diesel Tank, exhaust pipe extended upto 1 m.

outside pump house duly insulated with 50 mm. thick glass wool with

mm. thick aluminium sheet cladding, residential silencer, instruments and

protection as per specification, stop solenoid for auto stop in the event of

fault with audio indications, painted with post office red colour etc. as

M.S. fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

Suitable cement concrete foundation duly plastered with anti vibration

Supplying, Installation, Testing and Commissioning of electric driven

276 pressurisation pump suitable for automatic operation and consisting of

following: complete in all respect as required.

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal and flow of

lpm, at 88M head conforming to IS:1520.

Suitable HP SQ cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP

protection for enclosure, horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation

bolts etc. as required.

Suitable cement concrete foundation duly plastered with anti vibration

Fabrication, Supplying, Installation, Testing & Commissioning of electrical

control panel of cubical construction, floor mounted type, fabricated out of

2mm thick CRCA sheet, compartmentalised with hinged lockable doors,

dust and vermin proof, powder coated of approved shade after 7 tank

277 treatment process, cable alley, inter-connection, having switchgears and

accessories mounting and internal wiring, earth terminals, numbering etc.

complete in all respect, suitable for operation on 415 V, 3 phase, 50 HZ.

AC supply with enclosure protection class IP 42 as required.

COMMON PANEL IN FIRE PUMP HOUSE

a) 630 Amps. TP & MCCB 50 KA

b) Voltmeter (0-500 Volts) with selector switch

c) Ameter (0-300 Amps.) with selector switch & CT's etc

d) Set of 3 Phase indicating lamp.

e) Set of Al. bus bar 500 Amps.

OUTGOING : ( Electrical Fire / Sprinkler Pump )

2 Nos Electrical Driven fire Pump. 250 Amps. TP& MCCB-35K with

suitable HP fully automatic star/delta starter with over load protection,

current sensing type single phase preventor complete with all accessories

and internal wiring required for automatic operation, selector switch for

local/remote, auto/manual/OFF operation.

2 Nos Jockey pump. 100 Amps. TP & N MCCB-25 KA with suitable HP

fully automatic star/delta starter with over load protection, current sensing

type single phase preventor complete with all accessories and internal

wiring required for automatic operation, selector switch for local/remote,

auto/munual/OFF operation.

DIESEL ENGINE CONTROL

Control for Diesel Engine comprising:-

Auto/Manual selector switch & 3 attempt starting device, timers and relays

as required, push buttons, start/stop in manual mode.

Indication lamp for High/Low Lub. Oil pressure, High Water Temp. and

Engine ON indication.

Battery charger suitable for 12 V/24V DC with boost and tickle selector

switch, 0-15 V/ 0-30 V Dcvolt merer, 0-20A DC Ammeter.

All standard relays and accessories for automatic operation of diesel

SYSTEM CONTROLLER

Designing, Supply, Installation, Testing and Commissioning of system

controller to control operation of Main Electric Fire Pump, Diesel Pump,

278 Pressurisation Pump, in sequence as per specification consisting of 1 Set 393980.53 3939.81 397920.34

relays, times, sensors, annunciation window for fault indication, complete

as per specification.

Suitable cement concrete foundation duly plastered with anti vibration

Supplying and making end termination with brass Compression Gland &

279 Al.lugs for following sizes of PVC insulated, PVC sheathed/XLPE

Al.conductor cables of 1.1 KV grade as required

Supplying and installing following size of perforated painted with powder

coating M.S. cable trays with perforation not more than 17.5%, in

280 convenient sections, joined with connectors, suspended from the ceiling

with M.S. suspenders including bolts & nuts, painting suspenders etc. as

150 mm width x 50mm depth x 1.6 mm thickness. 15.00 Meter 575.60 5.76 581.36

Supplying & laying one number XLPE insulated PVC sheathed Aluminium

Conductor armoured UG cable of 1.1 KV grade Conforming to IS

281 7098/1988 with upto date ammendment of following size in the existing

RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/

cable tray/ open in air etc. as requred.

4 core, 25 sq.mm. Aluminium Armoured 120.00 Meter 384.00 3.84 387.84

3.5 core, 50 sq.mm. Aluminium Armoured 100.00 Meter 576.00 5.76 581.76

3 core, 120 sq.mm. Aluminium Armoured 50.00 Meter 1006.00 10.06 1016.06

3.5 core, 300 sq.mm. Aluminium Armoured 75.00 Meter 2723.00 27.23 2750.23

Earthing with GI Earth plate 600 mm x 600 mm x 6 mm th.including

accessories and providing masonry enclosure with cover plate having

locking arrangement and watering pipe with charcoal or coke and salt

complete as required.

Providing & fixing 25 mm x 5 mm G.I. Strip in 40 mm dia GI pipe from

283 earth electrode including connections with GI nut, bolt, spring, washer 75.00 metre 633.50 6.33 639.83

excavation and re-filling etc. as required.

Providing & fixing 25 mm x 5 mm G.I. Strip in on surface or in recess for

connections etc as required.

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop

earthing as required.

Supplying and installing following size of perforated painted with powder

coating M.S. cable trays with perforation not more than 17.5%, in

286 convenient sections, joined with connectors, suspended from the ceiling

with M.S. suspenders including bolts & nuts, painting suspenders etc. as

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe

conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers,

nuts bolts, gaskets etc. in ground including excavation & providing cement

concrete blocks as supports, anticorrosive treatment with coaltar/asphalt

tape as per IS 10221, refilling the trench etc. of following sizes complete

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589 and 1239 including fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling

with suitable clamps and painting with two or more coats of synthetic

enamel paint of required shade complete as required.

Supplying and fixing single headed internal hydrant valve with

instantanous Gun metal couplings of 63mm dia with cast iron wheel ISI

marked conforming to IS 5290 (Type-A) with blank Gunmetal cap and

chain as required

Supplying and fixing Single headed external yard hydrant valve with 1 No.

63 mm dia instantaneous FM Gun metal coupling and cast iron wheel, ISI

marked, conforming to IS 5290 (type A) with blank Gunmetal cap and

chain as required.

Supplying, fixing, testing and commissioning of following size butterfly

291 valve (manual) with CI body SS disc nitrile sheet & O-ring & PN

pressure rating as specified.

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN with non rising spindle, bronze/gun metal seat, ISI

marked complete with nuts bolts washers, gaskets and conforming to IS

780 of following size asrequired:

Supplying and fixing orifice plate made out of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange &

landing valve of external and internal hydrants to reduce pressure at the

outlet to the level of 3.5 kg/cm2 complete as required.

Supplying, fixing, testing and commissioning, of following sizes of non

return valve with C I body

Supplying, fixing, testing and commissioning of following size Y-Strainer of

295 ductile CI body flanged ends with stainless steel strainer as specified.

Supplying and fixing 63mm dia, 15mtr. Long RRL hose pipe with 63mm

296 dia Male and Female Gun metal couplings duly binded with GI wire, rivets 76 each 4577.11 45.77 4622.88

etc. conforming to IS 636 (type-A) as required.

Supplying and fixing First-Aid-Hose Reel with MS construction spray

297 painted in Post office Red, conforming to IS 884 with upto date

amendments, complete with the following as required.

30 m long 20mm (nominal internal) dia water hose Thermoplastic (Textile

reinforced) Type-2 as per IS:

20 mm (nominal internal) dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe

Supplying and fixing fire hose cabinet fabricated from 16 gauge M.S.

Sheet with single or double glazed front door (with 4 mm thick glass) and

298 locking arrangement, painted fire red with stove enamelled paint "FIRE

HOSE" written on front including necessary supports approximate size.

a)750mm x 600mm x 250mm deep. (External) 7 each 10520.00 105.20 10625.20

Providing and fixing Fire hose cabinet door (40mm x 40mm x 5mm) angle

depth fabricated with 2100mm x 1200mm MS sheet. Complete in all

respect with 25mmx25mmx3mm angle frame all around and stiffened in

between i/c hinges, handle, locking arrangement, painting with approved

synthetic enamel paint i/c sign writing on glass at internal hydrant

including providing & fixing S.S. sheet 2mm thick on remaining portion

above door to close opening i/c painting etc. as required. Glass shall be

Supply and fixing 63mm dia Gun Metal branch pipe with 20mm (nominal

internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for

instantaneous connection to interconnect hose pipe coupling as required.

Supplying and fixing following fire brigade connection of cast iron body

with Gun metal male instantaneous inlet couplings complete with cap and

chain as required for 150mm dia MS pipe connection, conforming to IS

904 as required.

2 Way FBC of Cl body 3 each 6093.30 60.93 6154.23

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

4 Way FBC of Cl body 1 each 12434.97 124.35 12559.32

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet,

1200 mm in height with Air release valve on top and flanged connection

302 to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with 4 each 16279.58 162.80 16442.38

required accessories, pressure gauge and painting with synthetic enamel

pain of approved shade as required.

Providing fixing testing & commissioning of 15 mm size quartzoid bulb type

303 sprinklers, of rating 68 degree C. pendent / upright with required

Sprinkler (Pendent / Upright) 4003 each 502.60 5.03 507.63

Side Wall Speinkler 220 each 502.60 5.03 507.63

Providing & fixing of pressure switch in M.S. pipe line including

connection etc. as required.

Providing & fixing Auto Air release valve for fire hydent and sprinkler,

suitable for pressure not less than 15 Kg/Sq.cm.

Providing & fixing flow switch in following sizes M.S. pipe including

connection etc as required.

Providing and fixing in position the industrial type pressure gauges with

gun metal / brass valves complete as required

Providing and fixing stainless steel standard Fireman's Axe with heavy

308 insulated rubber handle tested to 20000 volts as per IS : 926 complete. 31 each 711.00 7.11 718.11

Supply, installation, testing and commissioning of 150 mm dia Installation

Control Valve inclusive of 2 nos 150 mm dia Butterfly Valve, strainer,

Alarm Valve with Water Motor Gong, Pressure Gauges, Test Lines with

309 Ball Valves with necessary MS Class "C" piping with threaded fittings of 1 each 42628.80 426.29 43055.09

required sizes. It should be complete as per manufacturer's specifications

& as directed by Engineer- in-charge.

Providing, installing, testing & commisioning of fire brigade draw out

connection (fire department connection) with suction pipe MS class 'C'

mm dia. & 100 mm dia. foot valve & steel chain including wall mounted box

M.S. construction made out of 16 gauge MS Sheet with glass door to

310 house the above mentioned componenets. It should be complete as per 1 each 7699.00 76.99 7775.99

manufacturer's specifications & as directed by Engineer- in-charge. (to be

connected to static water tank) It should be complete as per

manufacturer's specifications & as directed by Engineer- in-charge.

Providing and fixing mechanical foam type(ISI marked) fire extinguishers

consisting of welded M.S. cylindrical body squeeze lever discharge valve

30 cm long high pressure discharge hose, discharge nozzle suspension

bracket ISI marked as per IS 933 finished externally with red enamel paint

and fixed to wall with brackets complete with internal charger.

Capacity 6 kg. I.S.I. Marked. 45 each 2947.00 29.47 2976.47

Providing and fixing Carbon-di-oxide fire extinguishers consisting of

welded M.S cylinderical body,squeeze lever discharge valve fitted with

internal dischargetube, 30cms long high pressure discharge hose,

discharge nozzle, suspension bracket, confirming to IS : 934 finished

externally with red enamel paint and fixed to wall with brackets with rawl

plug/dash fasteners complete with internal charge.

Capacity 4.5 kg. I.S.I. Marked. 45 each 8537.00 85.37 8622.37

Sub Head - I - Point Wiring

Point wiring for light/bell with 2X1.5 sq. mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length in below type of pipe erected with

6A Modular type switch/bell push & accessories and earth continuity of

313 following type erected on PVC/metallic/wooden Box single mounting base

frame, covered with textured/metalic white front plate modules erected on /

in wall / ceiling as per pipe erected with necessary lamp holder/ ceiling

rose/ H.D Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below type of pipe to be

erected complete with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC / wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains

for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Point wiring for Fan with 2X1.5 sq. mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length in below type of pipe erected with 6A

Modular type switch and num free EME four or more step type electronic

fan regulator with separately mounted and accessories with earth

continuity of following type erected on PVC/ metallic /wooden Box single

mounting base frame, covered with textured/ metalic white front plate

modules erected on / in wall / ceiling as per pipe erected with necessary

ceiling rose/ H.D Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete

Providing following type of Modular type Accessories mounted with

PVC/metallic.wooden box, single mounting base frame covered with

textured / metallic / white front plate, modules erected with necessary

connections as per site situation directed by Engineer in charge.

(1)One No. SP 6 Amp.

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

Rate excl GST Rate with LCess

S.No. Description Qty Unit 1% L Cess excl GST Amount

Supplying and fixing suitable size GI box with modular plate and cover in

front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6

317 A modular socket outlet and 2 nos. 5/6 A modular 1524 each 642.00 6.42 648.42

switch, connections etc. as required. (For light plugs to be used in non

residential buildings).

Providing & erecting insulated socket 3P+N+E with Plug 32A rating which

318 is comprised of Four pole MCB slot and insulated socket IP40 cat-III 139 each 2169.00 21.69 2190.69

Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked standard copper conductor wire in following type of pipe to be

319 erected concealed in / flushed on wall / ceiling, with 1.5 sq.mm copper

conductor FRLS PVC insulated standard wire of green colour for earth

continuity of following size.

(A) With medium class Rigid PVC pipe and accessories

Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked standard copper conductor wire in following type of pipe to be

320 erected in / on wall / ceiling, with 2.5 sq.mm copper conductor FRLS PVC

insulated standard wire of green colour for earth continuity of following

(A) with medium class Rigid PVC pipe and accessories

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with