Supply, Installation, Testing and Commissioning of 8 passenger Lift for Education Department, Assam University Silchar.

Amount

A.Lift Works

Supplying installation, testing and commissioning of Passenger Elevator(KONE/OTIS/JHONSON) make for 4stop (544 K 8 persons) having contract speed of 0.65-1 Metre/Sec(approx.) mps serving different floor in the existing lift shaft as per detailed specification enclosed and as under Location of the lift- 1.Type & Capacity-Passenger-08 Persons-544Kg. 2.Speed- 0.65-1 Metre./Sec (approx.) 3.Type of Drive- Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Down Collective Control. 4. Location of Machine Room- Top 5. Available Travel- as per site. ( Maximum)) 6. Serving- Ground Floor to 3rd Floor (0,1,2,3) 4 Stops 4 Levels 4 Openings 7. Well Size- As per site 8. Power supply- 415 Volts 3 phase, 50 cycles alternating current 10. Auxiliary Required- Single-phase 220 V 50 Cycles alternating current. 11. Car size (Clear Inside approx.---1300mm wideX1100 mm Deep 12. Pit Depth—as per site

13. Head Room-as per site. 14. Car Enclosure- SS Car- swift 15. Flooring- PVC Flooring 16.Electric Light- LED Light Fittings 17.Fan- 300 mm Sweep one number. 18. No of Entrances- One Location - Front. 19.Car Entrance- Centre opening stainless steel power door with vision panel 20.Landing Entrance- Centre opening stainless steel power door with vision panel. 21. Clear Opening- 800 mm Wide X 2000 mm High. 22. Indicators-Car & Landings-Direction & Position Indicator. Other Features Battery Operated Emergency Alarm and Light. Call registration LEDS . OSG Electronic Switch. Fire drive. 2 Intercom System Full length Infra-red Door Safety. Auto Rescue Device.. Call Registration LEDS . OSG Electronic Switch. Gate Open Warning Buzzer OEM Rescue Device.

Electrical Switch Gears/DBs

Supplying with fitting and fixing Servo controlled power stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Input range 290-480V ,Output range 440± 0.5% 22.5 KVA Servo-voltage stabilizer

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air as required and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 3 & 1/2 Core A2XFY 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.

With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Havells, Legrand, L&T make)

Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. L&T/Legrand/Havells make) 100A

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx6 mm heavy duty copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 25x5 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Any other schedule item for Electrical Works based on APWD SOR 2013-14 (Electrical Works)

Civil Works for 10.00 m.sq as per OEM requirement and as directed by deptt

Cost of mandatory permission certificate for installation and use of lift & elevators in favour of Assam University as per applicable rules of Chief Inspector of Lift and escalators, Govt Of Assam.

Any other schedule item for Civil Repairing and renovation works essential for installation and safe operation of the lifts as per site condition and as per direction of the department based on CPWD DSR