Construction of Brick Boundary Wall with iron gate and painting of Buildings within Mahamaya Mandir Complex and construction of security grill of main mandir building (TN No.81_01)

Amount

Brick Boundary Wall: 1.1 Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2 mts. below the existing Ground Level (a) In ordinary Soil

4.1 Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

2.1.1 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

18.1.1 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works, retaining wall & boundary wall etc.)

3.2.1 Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face.. 3.2.1.1 Column, pillar, post, struts..... Square, rectangular...

2.2.1 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. a) M15 grade concrete or Prop. 1:2:4

(B) In super structure from plinth level up to 1st floor level. (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. a) M15 grade concrete or Prop. 1:2:4

4.1.4 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

4.1.7 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

6.2.2 : 15 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

18.6.1 Supplying, fitting and fixing M.S. angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M.S. Angles.

17.5 Providing barbed wire on the existing barbed wire fencing with seven strands of barbed wire 12 S.W.G. x 2 plies x 4 points at 75mm apart including supplying, fitting and fixing with galvanised staples 38mm x 38mm x 3mm sizes with existing posts of the fencing, including removing rotten barbed wire as directed, complete with strengthening of post and tightening of the old barbed wire and joining old serviceable pieces on remaining lines as and where necessary and as directed.

13.3.4 Providing two coats of Birla White Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

13.4.1 Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/Nerolac.

Ornamental Iron Gate: 1.1 Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2 mts. below the existing Ground Level (a) In ordinary Soil

4.1 Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.

2.1.1 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

18.1.1 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works, retaining wall & boundary wall etc.)

3.2.1 Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face.. 3.2.1.1 Column, pillar, post, struts..... Square, rectangular...

2.2.1 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. a) M15 grade concrete or Prop. 1:2:4

(B) In super structure from plinth level up to 1st floor level. (ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. a) M15 grade concrete or Prop. 1:2:4

6.2.2 : 15 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

13.3.4 Providing two coats of Birla White Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

13.4.1 Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/Nerolac.

17.12 Supplying fitting and fixing double leaf heavy duty iron gate frame made of 40mm x 40mm x 6mm M.S. flat angle…

17.13 Providing rails for playing runner……..

17.14 Providing roller to the gate.. A) 25mm x 50mm dia roller

13.7.2 Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a) With ready mixed "red-lead/ red oxide" primer.

13.7.2 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac/ DUCO paints) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Painting Works: 13.1.1 (a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.(RCC two storied building)

13.3.4 Providing two coats of Birla White Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

13.4.1 Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a) Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J&N paint/Nerolac.

13.6.3 Applying priming coat over new wood and wood based surfaces over 100 mm in girth/ width after and including preparing the surface by thoroughly…… a) With ready mixed paint, wood primer (Pink)

13.6.5 Painting one coat (excluding priming coat) on new wood and wood based surface with enamel paint…. (i) Surfaces over 100mm in width or girth…. b) High Gloss (Asian Paint/ Berger Paint)

13.8.3 Painting one coat on old GCI sheet with ready mixed anticorrosive paint of appropriate brand shade suitable for painting over GCI sheet………

13.8.4 Extra over Item No.13.8.3 for every subsequent coat of paint.

13.1.1(a) Removing white or colour wash by steel wire brushing and / or scraping, sand papering and preparing the surface smooth including necessary repairs to scratches complete. (Main Mondir Tower) b) Extra over item No. (a) above for scraping on ceiling or sloping roof.

13.9.3 Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of Sandex Matt Brand of snowcem India Ltd. of required shade on old/ new wall surface to give an even shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats).

10.3 Supplying, fitting and fixing anodised aluminium decorated grill with anodised aluminium rectangular frame of ‘F’ and ‘H’ section fitted with walls, columns or stiffeners by special type of screws as per specification by the Department for all levels. (Aluminum Alloy procured from primary aluminum producer (On submission of certificate of alloy purchasing from primary producer)

11.2.3 Providing,fitting and fixing aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2.0mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (iii) 6mm coloured refectory glass.

High Mast Light: 16.16 Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.16.1. 25KA 415V 50Hz 4P MCCB (Schneider, Legrand, Siemens, Indo Asian make). 16.16.1.2. 16A

16.23 Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20) protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.23.1. ABB, Schneider, legrand, L&T make. 16.23.1.2. 100A

22.7 Supply, installation & testing of G.I. earth station ith perforated 40mm dia and 4.50 meter long heavy duty G.I. Pipe with necessary 40mm dia G.I. Fittings such as Socket, Tee, elbow, nipple and 50mm x 40mm G.I. reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged over C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

22.12 Extra for using salt (5K and Charcoal (64K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

22.20 Supplying & laying of following G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

32.1 Supplying and laying of following size PVC/SLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor upto 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanized for cables upto 2x10 sq mm 3x10 sq mm, 4x6 sq mm balance all galvanised steel strip), extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 Part-I) 1988 armoured U.G. cable U.C. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etc to proper place as specified and directd by the deptt. (Nicco/ Havells/ RPG/CI/Polycab/Gloster/ Finolex make). 32.1.4. 4 Core A2XWY A2XFY 32.1.4.4. 16.00 Sq. mm 4 Core armoured U.G. Cable

32.1.4.7. 50.00 Sq. mm 4 Core armoured U.G. Cable

41.4 Supplying including installation, testing and commissioning of Water Cooled Jackson Diesel Generator set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f. (la mounted on a 1) M.S. Fabricated base frame., 2) M.S. fuel tank of required capacity, 3) Residual Silencer, 4) AMF/Standard Control Panel, 5) Suitable batteries with lead, 6) First fill of lube oil, 7) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification. (RANGE FROM 15 KVA TO 625 KV TECHNICAL DATA CJ20D5P GENERATOR SET SPECIFICATIONS 20/16 3. No. of Phases, 1 phase, 4. POWER FACTOR 0.8 LAG JACTION ENGINE SPECIFICATION. 1) make) Cummins 2. Model X 2.5 G2 3. No. of cylinders 3 4. Aspiration Natural, 5. Cooling, Water Cooled. 6. Governor. Mechanical 7. Battery Capacity Rating 12 Volt. 8. FUEL CONSUMPTION LTR/HR @ 75% LOAD 3.7 ALTERNATOR SPECIFICATION. 1) MAKE) CGT (STAMFOR 2) Voltage REgulation +/- 1.0% 3) Insulation Class - H. 4) Standard Enclosure IP23 5) No. of Phases 3 AND 1

5.17 Supplying and drawing of weather proof aluminium conductor cable of the following size as directed and specified by the department 5.17.2 4.00 sq.mm twin core

Providing installation testing and commissioning of 20 Meter High Mast Tower polygon Shape with 12 Nos. of 250 W LED Light with fitting as per following electrification:- 1. 20 Metre Polygon High Mast with accessories. 2. Mechanical components including head frame and pulley assembly, winch bracket carriage ring, luminaries, CG Box, Manufactured Arms Resting bracket, Guide ring compensating disc, lighting arrestor etc. 3. Wire rope, safety rope, D-shuckle clamp, Nuts & Bolts. 4. Cable, foundation accessories which assembly distribution box, power motor, Toop dia -150mm, Bottom-410mm, Top thickness 3mm and bottom 4 mm (Bajaj make).

MANIRAJ BRAHMA

DANIEL BRAHMA