Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Acceptance of Contract | |
| 2 | L2₹34.3 L+₹89,895 (2.69%)Rejected-AOC INDEX NO E 108 HQ CWE NO 2 DELHI CANTT J 636 SECTOR 23 SANJAY NAGAR GHAZIABAD UTTAR PRADESH 201002 | GHAZIABAD | UTTAR PRADESH | 201002 | L2 | Rejected-AOC Ok | |
| 3 | L3₹38.6 L+₹5.2 L (15.6%)Rejected-AOC HOUSE NO 206 GALI NO 4 GAUPURI OPP GAUSHALA PHATAK GHAZIABAD UP 201009 | GHAZIABAD | UTTAR PRADESH | 201009 | L3 | Rejected-AOC Ok | |
| 4 | L4₹39.3 L+₹5.9 L (17.6%)Rejected-AOC INDEX NO E 1504 HQ CWE DEHRADUN 63 RAJA ROAD DEHRADUN | L4 | Rejected-AOC Ok | |
| 5 | L5₹40.4 L+₹7.0 L (21.0%)Rejected-AOC 36A 60 CIVIL LINE TELIYAR GANJ ALLAHABAD UTTAR PRADESH 211004 | PRAYAGRAJ | UTTAR PRADESH | 211004 | L5 | Rejected-AOC Ok |
| Sl No | Description | Qty | Unit | Amit Traders L4 | M/s RK ENTERPRISES L1 | KRISHANA ELECTRIC WORKS L2 | M/S PUNDIR BUILDERS L6 | Shri Radhey Associates L3 | Pragati Enterprises L5 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed. | 1,000 | Sqm | 6 ₹6,000 | 3 ₹3,000 Lowest | 5 ₹5,000 | 5 ₹5,000 | 3 ₹3,000 Lowest | 4 ₹4,000 |
| 2.00 | M&L for applying 3mm thick damp proof wall care putty, Preparation of puttied wall/ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over and including a coat of primer complete all as specified and directed. | 4,000 | Sqm | 50 ₹2,00,000 | 30 ₹1,20,000 | 39 ₹1,56,000 | 50 ₹2,00,000 | 20 ₹80,000 Lowest | 55 ₹2,20,000 |
| 3.00 | M&L for Preparation of old plastered surfaces of walls / ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil emulsion distemper on walls/ceiling using mechanical sander/grinder complete all as specified and directed. | 2,000 | Sqm | 30 ₹60,000 | 20 ₹40,000 Lowest | 39 ₹78,000 | 40 ₹80,000 | 32 ₹64,000 | 28 ₹56,000 |
| 4.00 | M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over and including a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ | 2,000 | Sqm | 60 ₹1,20,000 | 20 ₹40,000 Lowest | 49 ₹98,000 | 50 ₹1,00,000 | 48 ₹96,000 | 55 ₹1,10,000 |
| 5.00 | M&L for Preparation of old surfaces of wall / ceiling and applying two coat weather coat exterior paint complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex Ultima/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ | 4,000 | Sqm | 35 ₹1,40,000 | 20 ₹80,000 Lowest | 49 ₹1,96,000 | 40 ₹1,60,000 | 42 ₹1,68,000 | 50 ₹2,00,000 |
| 6.00 | M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. | 300 | Sqm | 35 ₹10,500 | 35 ₹10,500 | 29 ₹8,700 | 50 ₹15,000 | 21 ₹6,300 Lowest | 30 ₹9,000 |
| 7.00 | M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. | 100 | Sqm | 35 ₹3,500 | 35 ₹3,500 | 29 ₹2,900 | 50 ₹5,000 | 18 ₹1,800 Lowest | 30 ₹3,000 |
| 8.00 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed. | 4 | Cum | 4,500 ₹18,000 | 3,500 ₹14,000 | 2,500 ₹10,000 Lowest | 5,000 ₹20,000 | 4,650 ₹18,600 | 3,600 ₹14,400 |
| 9.00 | M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) of complete all as specified and directed. | 1 | Cum | 3,000 ₹3,000 | 1,435 ₹1,435 | 1,000 ₹1,000 | 2,000 ₹2,000 | 2,340 ₹2,340 | 600 ₹600 Lowest |
| 10.00 | M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. | 30 | Sqm | 90 ₹2,700 | 40 ₹1,200 | 39 ₹1,170 Lowest | 60 ₹1,800 | 45 ₹1,350 | 60 ₹1,800 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
21 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
CERTAIN REPAIR TO JCOs/OR/CDE MD ACCN UNDER AGE B/R-II AT IMA DEHRADUN
2025_MES_733351_1
GE/IMA/T-68 OF 2025-26 9591/E8
Open Tender
Civil Works
Item Rate
180 days
GE IMA Dehradun
As per tender documents/NIT
6 documents required · 6 mandatory
₹500
Yes
GE IMA Dehradun
₹98,000
Yes
20 Dec 2025
30 Sept 2025
28 Oct 2025
30 Sept 2025
21 Oct 2025
14 Oct 2025
Amount
M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed.
M&L for applying 3mm thick damp proof wall care putty, Preparation of puttied wall/ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over and including a coat of primer complete all as specified and directed.
M&L for Preparation of old plastered surfaces of walls / ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil emulsion distemper on walls/ceiling using mechanical sander/grinder complete all as specified and directed.
M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over and including a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+
M&L for Preparation of old surfaces of wall / ceiling and applying two coat weather coat exterior paint complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex Ultima/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+
M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) of complete all as specified and directed.
M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.
M&L in repair Drapery rod in any length, high strength stain less steel pipe having outer dia 20-25mm including a pair of brackets and a pair of stainless steel finials complete as approved by Enginer in Charge all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed
Taking down steel window shutter n.exc 1 sqm and refixing in the same opening after replacement of broken hinges including welding, grinding, painting etc each complete all as specified and directed
Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed
S&F 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed
M&L for Mild steel, plain of colour, black/green sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed
S&F in repair Solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame fixing in the frame at site complete all as specified and directed.
S&F 35mm thick 2nd class hardware factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc complete all as specified and directed.
S&F double rebated Steel window (measure as one) factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including 3mm thick frosted glass panes fixed with glazing oil putty and wire mesh complete all as specified and directed.
S&F factory made 40 mm thick IInd class hardware plain framed panelled shutter (any numbers of panel) with lock rail &panel of 9mm B.W.P. commercial ply or12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as specified
S&F 30mm thick flush shutter solid core construction with particle board core and plywood face panels commercial type on both sides complete all as specified and directed
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge. (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge.
S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge.
M&L 35mm thick factory made solid WPC (Wood plastic composite) both side prelaminated door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and directed.
S&F Butt hinges, 100 mm long, medium weight stainless steel with stainless steel hinge pin anodised and fixed complete all specified as directed
S&F in repairs 250mm long Stainless steel (SS-304) sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed
S&F in repair 150mm long (SS-304) handles, fabricated type, complete all as specified and directed.
S&F in repair 150mm long (SS-304) barrel tower bolts of extruded section complete all as specified and directed
S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/wooden beads or galvanized wire staplescomplete all as specified and directed
S&F 4mm thick sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass pane of any thickness complete all as directed.
S&F 4mm thick frosted sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass pane of any thickness complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
M&L for Non skid vitrified ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.
M&L for Vitrified ceramic coloured tiles 8 to 9 mm thick (Square or rectangular) polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.
M&L for Glazed ceramic coloured tiles of size 450x300x7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed.
S&F in repair reinforced PVC connection 15 mm size with brass nuts of length 450 mm complete all as specified and directed.
S&F CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series
S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flanges in complete all as specified. Make : Jaquar Opal Prime Series/Cera Ruby series/Somany Bellis series
S&F 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series
S&F 15mm bore Pillar tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series
S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series
S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe.
S&F in repair CP brass overhead shower square fancy type 100x100 mm with extension CP Arm pipes.
S&F in repair Stainless steel (SS-304) towel ring fixed with screw in wall complete all as directed.
S&F in repair SS towel rail, 600mm long as approved
M&L for Rendering 15 mm thick in cement mortar (1:4) using fine sand on brick or concrete surface finish even and fair finishing, curing scaffolding including mixing of water proofing compound and taking down of existing cement plaster etc complete all as specified and directed.
M&L for Rendering 15 mm thick in cement mortar (1:6) using coarse sand on brick or concrete surface finish even and fair finishing, curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints and necessary formwork and demolition of existing concrete complete all as directed
M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as directed (weight of steel wire fabric to be ascertained through a Board of Officer).
S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing shelf complete all as specified and directed.
S&F PVC (SWR) 110mm dia pipes 6kg/cm2 rating single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC (SWR) 75mm dia pipes 6kg/cm2 rating single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC bends fitted with oval access doors 75/100 mm dia any radius diminishing pieces or tapers ISI marked fixed in repair complete all as specified and directed.
S&F PVC (SWR) bends 110mm dia ISI marked fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC (SWR) bends 75mm dia ISI marked fixed to walls/floors fixed in repair complete all as specified and directed.
S&F PVC (SWR) floor trap 100mm dia ISI marked, plain with grating jaali including jointing with solvent cement fixed in repair complete all as specified and directed.
S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all new fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking out existing steel tubing complete all as directed.
S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all new fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking out existing steel tubing complete all as directed.
S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank complete all as specified and directed.
S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed.
S&F in repair Ball valve 15/20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.
S&F in repairs Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, coupling, washers and waste pipe including bedding in cement morter on to dwarf wall or including fixing cantilver brackets overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm complete all as directed.
S&F in repair 15mm PVC bib tap (ISI marked) for plumbing with all accessories complete all as specified and directed.
S&F in repair 15mm CI bib tap (ISI marked) for plumbing with all accessories complete all as specified and directed.
S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests of approved make including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.
S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover with necessary PVC pipe fittings fixed in repair complete all as specified and directed.
S&F in repair Stainless steel (SS-304) plate rack of size 24 inch X 24 inch X 10 inch complete all as directed.
S&F in repair Vitreous china wash basin, white, flat back, size 550x400mm including bracket, waste pipe and coupling complete all as directed.
S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed
M&L for 300x300x25mm heavy duty Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.
S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed in repairs complete all as directed.
S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter fixed in repairs complete all as directed by Engr-in-charge.
Dismantling existing timber scantling in any position complete all as specified and directed.
S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W (Gde E- 250) quality B).
M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.
M&L for 40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of old concrete complete all as specified and directed.
M&L in repair for 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electrogalvanised width of flap 30 mm and stainless steel handles of 150 mm size complete all as specified and directed.
S&F Chromium plated stainless steel (SS-304) wire basket (storage, cup and saucer, Plate, cutlery, Grain Trolley, Bottle pull out) pull out type Grade 304 with necessary fixing clips including ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity of 50 kgs etc complete all as specified and directed.
M&L for Non skid/capsule pattern fully vitrified coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. Note :- Colour as approved by GE.
M&L for R.C.C 1:2:4 nominal mix type B1 (20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, canopies, deck slabs and in shelves and the like complete all including demolition of existing slabs and necessary formworks.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework including taking down existing boards any thickness etc complete all as directed
KRISHANA ELECTRIC WORKS (BID ID -3461371)
Shri Radhey Associates (BID ID -3461631)
Amit Traders (BID ID -3456069)
Pragati Enterprises (BID ID -3456257)
M/S PUNDIR BUILDERS (BID ID -3456423)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
Genpage68.pdf
Tender Documents • 0.80 MB
BOQ_821130.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .