Reformation of BT surface Using CMP with Paver finisher from KajamalaiClony to RPF Training center in ward NO.60

Earth work excavation for foundation in ordinary soil with initial lead and lift etc., complete as per standard specification Open excavation)

Providing and laying spreading and compacting graded aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed 3 material by tipper to site laying in uniform layers with paver in sub base base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per classe 406 of MORTH specifications

Providing and laying Prime cont of over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area minous binder, including labour m2 including cust charges for applying the required quantity of bituminous Prime coat manually etc., complete per 502 of MORTH Rev 5specifications

Providing and laying tack coat of kgs/10 sqm over the WMM treated with hinder MORTH Rev Emulsion (RS) for 10square meter area bituminous binder, including labour charges for applying the required quantity of bituminous Prime coat manually etc, complete as per 503 of required to the with rucks paver finiser

Poviding and laying 50mm consolidated thick Dense Bituminous macadam using 0.24 cum of 26.50 13.20mm, 0.25cum 13.20 2.36mm 0.23 cum of 2.36 mm & below and with with 53.20Kgs of VG30/40 bitumen for premixing per 10sqm including cost and fall materials to CMP site, heating the bitumen and equired temperature and mixing the min, required central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform m3 thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory/Pneumatic Roller to the required density etc, including labour for attending to paver at site etc., including hire charges and fuel charges for 20-301 CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory/Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-4

Poviding and laying Bituminous Concrete to 30mm thick using 0.13 of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of and below with 50.30kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20- 30ton capacity, conveying the mix by tipper trucks to paver site spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8- 10tonne Vibratory/Pneumatic Roller to the required density etc including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-4.