Joint Investigation Post Rajyakar Bilaspur Road Rudrapur (Internal electrification and repair work in residential and non-residential buildings

Amount

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.Group C

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch

Same as above but for 3 pin 5/6 amps socket ,complete in all respect.

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Same as above but for 2x2.5sq.mm+1x2.5sq.mm earth wire.

Same as above but for 2x4.0sq.mm+1x4.0sq.mm earth wire.

Same as above but for 2x6.0sq.mm+1x6.0sq.mm earth wire.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1x 1.5 sq.mm

S/D of 20mm dia medium class PVC conduit along with accessories in surface/recess, complete in all respect.

S/F of suitable size GI box with modular plate & cover in front and 6 pin 5/6 & 15/16 amps modular switch and socket on surface or in recess,complete in all respect.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..Single pole

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 AMP

S/F of 3 pin,5 amp.ceiling rose on the existing jonction box,including connection etc.as required.

S/F of brass batten/angle holder including connection etc.as required.

S/D of 3x1.5sq.mm FRLS PVC insulated copper conductor single core cable in existing surface/recess PVC conduit.Complete in all respect.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Steel work in built up tubular(round) including welding and bolted with special shaped washers etc.hot finished welded type tubes,complete in all respect. CIVIL DSR 2023

Structural steel work in single section,fixed with or without connecting plate,including cutting,hoisting fixing in position & applying a priming coat of approved steel primer,complete in all respect.CIVIL DSR 2023

S & F surface/Flush mounting 8ways TPN distribution board without additional door without MCB complete in all respect,as directed at site by Engineer in charge.

S & F surface/Flush mounting 4ways V TPN distribution board without additional Door without MCB complete in all respect, as directed at site by Engineer in charge.CAT A

S&F of 630 AMP four pole Mouled case type on load change over switch with enclosure including the cost of labour, T & P and material reuired for proper completion of the work as per direction and satisfaction of Engineer an charge.

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

S/F of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 52 to 72 watt,complete in all respect. Catt.AA

S/L of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts. 95 sq.mm.3 & 1/2 core,Complete in all respect.

S/L of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts. 10sq.mm 2 core,Complete in all respect.

Supply and burring of Safe Earthing Electrode T-19 ZnZinc Coated, Length 2000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified

S/F of LED tube light fitting with batten for 1x22 watt.LED tube light ,complete in all respect. Catt.AA

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

S/F of CO2 type fire extinguisher,4.50 kg capacity (ISI marked IS : 2878 & TAC approved) complete with initial charge & wall bracket,complete in all respect.

S/F of steel tubular pole 9.5 metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc.complete in all respect.

S/F of factory wired integral LED flood light lominaires having die cast aluminium housing built with driver set,suitable for 140 to 150 watt,complete in all respect. Catt.AAA Havells/HPL/Philips/Bajaj make

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.

S/F of exhaust fan 300 mm of reputed make,complete in all respect.

S/F of 15 watt LED,complete in all respect.

VIKRAM SINGH CHAUHAN (BID ID -382066)