Nibhada Patthar repairing and New Nibhada Patthar work at Different Chals of Millatnagar area And other different chawls at Maninagar ward South Zone

mixed Material by tipper to site, laying in uniform

layers in sub- base / base course on well prepared

surface and compacting with vibratory roller to

achieve the desired density as per Codal Provision.

a 413.28 Production & Supply of WMM 1975 Cum

b 413.28 Laying of WMM 35 Cum

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ;

shape (Usually Uni-Paver Blocks) using black trap good

quality aggragate of 20 mm nominal size for footpath,

parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in

charge. Cost includes formworks using rubber mould,

Rate providing and laying paver blocks as per required

grading and specification. The paver block shall be

mechanically compacted. The work of paving blocks

shall be executed in line and level by skill mason of

flooring work only. It should be laid in such a way that

the no cutting of the paver block to be necessary. if

cutting of paver block necessary then it should be cut

by machine only and carting. The finished surface of

the paver block shall have resonably good, plain

finished. Paver blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of materials

shall not be allowed for production. Laying on 5 cms

thick sand bedding.

Supplying and fixing of 300 mm-L x 150 mm-B x

mm-H Kerb block for Footpath in M-20 grade using

mm nominal size black trap aggregate of

Sevaliya/Timba or equivalent quality for pre-cast

blocks, reasonably exposed finish/ formwork , mould

with well equipped with vibratory system for kerb

stones of approved design including curing, etc.

complete, including the cost of formwork etc.

complete. The rate shall also include necessary cutting

of asphalt, fixing the Kerb stones in line and level on

cm thick sand bedding with necessary equipments and

materials. The rate shall also include the flush pointing

in CM (1:3) for all joints of the kerbstones. Filling of zari

alone the sides of the kerb stone fixed with Bituminous

concrete mixed in proper position as directed by

Engineer in change to form a portable mixture. In any

case Gravel or such type of materials shall not be

allowed for production.

a 50 a) Laying on 5 cm thick Sand Bedding 350.89 RMT

Providing, supplying and fixing precast C.C. blocks (M-

20) edge kerb having size of 75 x 300 x 300 mm depth

8 200 and as per design conveying it to the site, jointing into 195.54 rmt

C:M 1:3 and racking out the joints incl. necessary

excavation of asphalt, soil etc..completed.

Supplying & Fixing Nimbhada ladi 37 to 50 mm thick

for walk way covering the activity of excavation,

ramming, laying on sand bedding as per requirement

to fix the Nibhada stone in Line & Level with cement

pointing in cement mortar 1:2 etc complete as

Repairing damaged M.H. and rasing M.H. up to road

level incl. removing damaged brick work and repairing

by brick masonry in C.M. 1:5 and plaster in C.M. 1:3

and fixing C.I. steps and existing MH sheet cover,

removing the debris from MH and carting the same as

directed. (Based on Drainage SOR 200910)

a 50 (A) up to 0.15 mt. (@ Two Coarse) 728.82 No.

b 50 (B) up to 0.35mt. (@ Four Coarse) 1,155.44 No.

Labour work for fixing interlocking blocks / any kind of

pavement on up to 50 mm th sand bedding, levelling,

watering and fixing in line & level as well cleaning the

site etc.comp. as directed. SOR-2016