Kerala

Active

Works

Electrical Works

GENERAL Electrification Kanhirapuzha Division office Rewiring of Kanhirapuzha Irrigation Division office at Kanhirapuzha Dam General Electrical Work

Irrigation Department

Chalakkudy | Thrissur, Kerala

Amount: ₹8.5 LCloses: 23 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Closes23 Oct 2026
Bid Opening26 Oct 2026

Tender Value

₹8.5 L

EMD Value

₹21,135

Closing Date

23 Oct 2026, 6:00 pm4d left

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

Electrical Wing Irrigation Subdivision Chalakkudy

Work Description

GENERAL Electrification Kanhirapuzha Division office Rewiring of Kanhirapuzha Irrigation Division office at Kanhirapuzha Dam General Electrical Work

Tender Information

Tender ID

2026_Irrig_879286_5

Reference Number

C-ETN-OCT/EL/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Chalakkudy

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical/Finance

RequiredBILL OF QUANTITY(BOQ) (.xls)

RequiredDULY FILLED AND SIGNED COPY OF PRELIMINARY AGREEMENT (.pdf)

RequiredDULY FILLED COPY OF Requisition Form for e-Payment (.pdf)

RequiredDULY FILLED AND SIGNED COPY OF INTEGRITY PACT CERTIFICATE (.pdf)

RequiredDULY FILLED AND SIGNED COPY OF AFFIDAVIT (.pdf)

RequiredDULY FILLED AND SIGNED COPY OF FORM OF TENDER (BID SUBMISSION LETTER) (.pdf)

RequiredSBD DOWNLOADED FROM ETENDER WEBSITE (.pdf)

RequiredBidders valid registration certificate in Kerala PWD Electrical wing/Inspectorate (.pdf)

RequiredGST registration certificate (.pdf)

Requiredsigned copy of special conditions and accepted list of materials (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,865

EMD Fee Amount

₹21,135

Important Dates

Last Activity

14 Oct 2026

Published

14 Oct 2026

Bid Opening

26 Oct 2026

Download Starts

14 Oct 2026

Download Ends

23 Oct 2026

Submission Starts

14 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (63 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Rewiring Kanhirapuzha Division Office
1.001	OD139747/2026-2027:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit/existing CMS, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B	87	point	-	-
1.002	OD140045/2026-2027:Supply and fixing of 9W LED bulb	16	no	-	-
1.003	OD140007/2026-2027:Supplying and fixing Bulk head fitting of 7/9 W on wall/ceiling including connection etc. as required.	9	each	-	-
1.004	19.1:Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no:s blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accesories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required:	16	each	-	-
1.005	OD142488/2026-2027:Supply, Conveyance, installation, testing and commissioning of wall mounting fans of all types using mounting brackets supplied along with the fan.400 mm sweep Wall Mounting fan	2	each	-	-
1.006	1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	16	each	-	-
1.007	90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.	16	each	-	-
1.008	OD139776/2026-2027:Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required	10	metre	-	-
1.009	OD87313/2025-2026:Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. - 225 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C.	4	each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.12 MB

Tendernotice_2.pdf

PDF • 2.62 MB

Work Item Documents

BOQ_1495012.xls

BOQ • 0.35 MB

KanhirapuzhaDivisionOffice2657NITSBDmerged.pdf

Tender Documents • 2.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Rewiring Kanhirapuzha Division Office
1.001	OD139747/2026-2027:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit/existing CMS, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B	87	point	-	-
1.002	OD140045/2026-2027:Supply and fixing of 9W LED bulb	16	no	-	-
1.003	OD140007/2026-2027:Supplying and fixing Bulk head fitting of 7/9 W on wall/ceiling including connection etc. as required.	9	each	-	-
1.004	19.1:Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no:s blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accesories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required:	16	each	-	-
1.005	OD142488/2026-2027:Supply, Conveyance, installation, testing and commissioning of wall mounting fans of all types using mounting brackets supplied along with the fan.400 mm sweep Wall Mounting fan	2	each	-	-
1.006	1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	16	each	-	-
1.007	90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.	16	each	-	-
1.008	OD139776/2026-2027:Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required	10	metre	-	-
1.009	OD87313/2025-2026:Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. - 225 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C.	4	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Rewiring Kanhirapuzha Division Office

1.001

OD139747/2026-2027:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed medium class PVC conduit/existing CMS, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

point

1.002

OD140045/2026-2027:Supply and fixing of 9W LED bulb

1.003

OD140007/2026-2027:Supplying and fixing Bulk head fitting of 7/9 W on wall/ceiling including connection etc. as required.

each

1.004

19.1:Supply, installation, testing and commissioning of 1200 mm sweep BEE-5 star rated ceiling fan with brushless direct current motor (BLDC) , class of insulation B , 3 no:s blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 cum/min,350 RPM (tolerance as per IS :374-2019, THD less than 10% remote or electronic regulator unit for speed control and all remaining accesories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg celsius ( maximum) , insulation resistance more than 2 Megaohm , suitable for 230V,50 Hz, single phase AC supply , earthing etc., complete as required:

each

1.005

OD142488/2026-2027:Supply, Conveyance, installation, testing and commissioning of wall mounting fans of all types using mounting brackets supplied along with the fan.400 mm sweep Wall Mounting fan

each

1.006

1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

each

1.007

90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.

each

1.008

OD139776/2026-2027:Supply and providing every additional length of down rod of 15mm heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required

metre

1.009

OD87313/2025-2026:Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. - 225 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C.

each