Construction of Anganwadi Centre At Villages Under Panchayat R & B Sub Division Shihori 2026-27 Package No.14 in Ta. Deodar, Dist. : Vav- Tharad, (1) Delvada-1, (2) Kotada Forna-1 (3) Rantila - 3 & (4) Dhanvada-1 (4 Unit)

No. may be more figures Estimated

or less Quantity

1 Charges for cleaning road site by removing of Gandabavals. Akadas, Bordies, etc. upto 4mt. On either side from 4.00 Job 2525.00

edge of B.T. surface including de-rooting by JCB machine & throwing away all stuff, branches etc. with all lead & left

with all materials, labour etc. complete as directed

(B) Scattered Bushes

2 Demolition of Masonary, AC or GI sheet Roofing, RCC / PCC, sanitary lines etc complete including stacking of 4.00 Job 10100.00

useful materials and disposal of un serviceable materials with all required lead and making ground by filing trenches

and made levelled and clear ground as directed by engineer in charge.

3 Excavation for foundation up to 1.5 mt depth including sorting out & stacking of useful materials and depositing of 232.00 Cu.M. 122.94

the excavated stuff with all lead

Loose or soft soil

4 Providing and laying C.C.1:4:8 (1 cement, 4 sand, 8 graded brick aggregate 40mm nominal size) and curing 56.00 Cu.M. 2692.00

(A) Foundation and plinth

5 Brick work using common burnt clay building bricks having crushing not less than 35 kg /cm2 in foundation and 112.00 Cu.M. 4214.33

plinth in cement mortar 1:6 ( 1 cement, 6 sand ) (B) conventional

6 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 69.60 Cu.M. 136.92

20 cm. In depth consolidating each deposited layer by ramming and watering.

7 Filling in plinth with sand under floors including watering Ramming, consolidation and dressing etc complete. 44.00 Cu.M. 444.75

8 Brick work using common burnt clay building bricks having crushing not less than 35 kg /cm2 curing super 69.20 Cu.M. 4496.05

structure above plinth level in cement mortar 1:6 (1 cement : 6 sand) for ground floor. (B) conventional

9 Half brick masonary work using common burnt clay building bricks having crushing not less than35 kg/cm2 in 48.00 Sq.Mt. 684.26

cement mortar 1:4 ( 1 cement, 4 coarse sand ) in super structure above plinth level .G.F.

(B) conventional

10 Providing and fixing mild steel door and widows of frame of 40x40x6mm and shutter frame for doors 30x30x3 & for 1840.00 Kg. 103.02

windows 35x35x5mm size angle & for shutter 25x25x3 and 18 gauge sheet for panels& 10mm dia bars at 10 cm c/c

for grill , including 20x6 mm flat for binding patti & one coat of primer and two coats of oil painting etc. complete.

11 Providing and fixing partly glazed and partly weld mesh jali ventilators made from 35x35x5 mm size angle & 10 mm 7.20 Sq.Mt. 2667.41

dia bars at 10 cm c/c for grill, 20x6 mm flat fixing weld mesh jali, 3 mm glass, & one coat of primer and two coats of

oil painting etc. complete.

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

12 Providing and laying ordinary cement concrete 1:1.5:3 (M 200) and curing complete including the cost of formwork 11.72 Cu.M. 5188.37

but excluding the cost of reinforcement for reinforced concrete work in Footing

13 Providing and laying ordinary cement concrete 1:1.5:3 (M 200) and curing complete including the cost of formwork 5.00 Cu.M. 12554.30

but excluding the cost of reinforcement for reinforced concrete work in column

14 Providing and laying ordinary cement concrete 1:1.5:3 (M 200) and curing complete including the cost of formwork 9.20 Cu.M. 4711.65

but excluding the cost of reinforcement for reinforced concrete work

in PLINTH BEAM/SEAL BAND

15 Providing and laying ordinary cement concrete 1:1.5:3 (M 200) and curing complete including the cost of formwork 1.60 Cu.M. 6897.30

but excluding the cost of reinforcement for reinforced concrete work in CHHAJJAS

16 Providing and laying ordinary cement concrete 1:1.5:3 (M 200) and curing complete including the cost of formwork 7.60 Cu.M. 8035.56

but excluding the cost of reinforcement for reinforced concrete work in BEAMS

17 Providing and laying ordinary cement concrete 1:1.5:3 (M 200) and curing complete including the cost of formwork 27.20 Cu.M. 7258.19

but excluding the cost of reinforcement for reinforced concrete work in SLAB

18 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position 5960.00 Kg. 77.29

complete upto floor two level

19 Providing and laying Kotastone slab flooring over 20 mm ( average ) thick base of cement mortar 1:6 ( 1 200.00 Sq.Mt. 1018.88

cement , 2 coarse sand ) or L M 1:1.5 and laid over and jointed with grey cement slurry including rubbing

and polishing etc complete

(A) 25mm thick.

20 Providing and laying Kota stone slab 25 mm. thick in risers of steps. Dado and pillars laid on 10 mm. thick cement 17.20 Sq.Mt. 1130.79

mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc.

21 Providing and laying white glazed tiles 6 mm. Thick in flooring treads of steps and landings laid on a Bed of 12 mm. 13.60 Sq.Mt. 955.41

Thick cement mortar 1:3 (1 cement : 3 coarse sand) finished with flush pointing in white cement

22 Providing and laying white glazed tiles 6 mm. Thick in skirting risers of steps and dado on 10 mm. Thick cement 31.60 Sq.Mt. 1030.57

plaster 1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed with white cement slurry.

23 Providing 15 mm. Thick cement plaster in single coat on fair side Brick/concrete walls for interior plastering upto floor 560.00 Sq.Mt. 287.80

two level and finished even and smooth in cement mortar 1:3 (1 cement : 3 coarse sand) with Distemper three coats

24 20 mm thick sand faced cement plaster on walls upto height 10 meters above ground level consisting of 12 mm. 484.00 Sq.Mt. 394.53

Thick backing coat of cam. 1:3(1 cement : 3 sand) and 8 mm. Thick finishing coat of cam. 1:1(1 cement : 1 sand)

etc. complete. including three coats water proof cement paint.

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

25 Providing 10 mm. Thick cement plaster in single coat on fair side Brick/concrete walls for interior plastering upto floor 152.00 Sq.Mt. 268.77

two level and finished even and smooth in c.m.1:3(1 cement : 3 sand) Distemper three coats

GROUND FLOOR

26 [Providing and laying water proofing treatment with china mosaic tiles flooring over avg 40 mm C.C. 1:2:4 {1 180.00 Sq.Mt. 1078.69

Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm size} bedding for maintaining slope for plain and curve surface &

mm to 20 mm of broken piece of ceramic / glazed tiles ( one for more colour as directed ) to be laid over cement

mortar bedding of C M 1:3 (1 cement : 3 sand ) contain one Kg of water proofing materials per bag of O P C at plain

or / and slops and to be tempered to bring mortar ceramic up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm along the wall and curing with bends any patterns

or design as per drawing and cleaning by using oxalic acid etc complete.

27 Providing and fixing to wall, ceiling and floor 6.0 Kg f/cm2 working pressure polyethylene pipes of the following 80.00 Rmt. 280.23

outside dia. Low density, complete with special flange compression type fittings wall clamps etc. including making

good the wall, ceiling and floor.

28 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make 40.00 Rmt. 72.65

or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

(A) 15 mm dia.

29 Providing laying and jointing in true line and level following dia. U.P.V.C. Pipe (SCH -40) line including fittings make 80.00 Rmt. 91.84

or equivalent as approved by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

30 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali of the following nominal 12.00 No. 733.26

diameter of self cleansing design with C.I. screwed down or hinged grating including the cost of cutting and making

good the walls.

31 Providing and fixing S.W. Gully trap with C.I. Grating brick masonary chamber and water tight C.I. Cover with frame 4.00 No. 1292.19

of 300 mm. X 300 size (inside) with standard weight, square Mouth traps 100mmx100mmx100mm size P- type

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

32 Constructing brick masonary chamber for under ground C.I. Inspection chamber and bends with bricks having 4.00 No. 2932.93

crushing strength not less than 35 Kg/cm2 in cm. 1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal

dimensions, total weight of cover with frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame

Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm. size ) foundation

concrete 1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls & bed concrete etc. complete.(I) inside dimensions, 455 mm. x 610 mm. And 450 mm. Deep for

single pipe line.

33 Providing and fixing water closet squatting pan (Orissa type W. C. pan)'' Baby Tube" size . including providing and 4.00 No. 1334.56

fixing 100 mm. Size 'P' or 'S' trap for water closet squatting pan including jointing the trap with the pan and soil pipe

in cement mortar 1:1 (1 cement : 1fine sand)

(A) Vitreous china

(I) Long pattern white colour

34 Providing and fixing wash basin with single hole for pillar tap with C.I. Or M.S. brackets painted white including 4.00 No. 1673.31

cutting holes and making good the same but including fittings : 32 mm dia. C.P brass waste & M.I fisher union

(A) Vitreous china

(ii) Flat back wash basin 550mm x 400mm size

(I) in white colour

35 Providing and fixing SS sink Glossy ASIS 304 Grade x 1mm thick with over all size 510x432 mm & bowl size 4.00 No. 2419.96

445x368x190 including cutting holes in platform and making good the same with necessary waste pipe etc.

36 Providing and fixing chromium plated brass half turn flush cock of approved quality including fixing in pipe line etc. 4.00 No. 263.77

25 mm dia.

37 Providing and fixing gun metal check or nonreturn full way wheel valve 8.00 No. 420.63

25 mm dia.

38 Providing and fixing screw down bib taps of following size : 8.00 No. 214.81

Brass chromium plated screw down bib tap 15mm dia.

39 Providing and fixing Pillar Tap, capstan head, screw down high pressure with screws, shanks and back nuts 8.00 No. 308.73

15 mm dia.

40 Providing and fixing brass screw down stop tap 8.00 No. 205.83

15 mm dia.

41 Providing erecting and fixing double coated PVC (ISI) mark water tank of reqd. capacity each with all necessary 2000.00 Liter 3.95

fittings & connection etc. comp on terrace

42 Providing and fixing M. S. Fan clamps of shave and size as specified in existing R.C.C. slab including cutting, chase 8.00 No. 178.73

and making good.

43 Providing and laying of 30 mm thick mirror polished Kota stone slab for selves of cup boards including fixing with 29.20 Sq.Mt. 582.77

necessary grooves with all labour material etc. complete

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

44 Providing and laying of sandwich type kota stone platform and supports using 25 mm thick mirror polished Kota 15.20 Sq.Mt. 890.82

stone slab using cam 1:3 for sandwich portion and front patti with round molding etc complete

45 Providing and constructing soak pit of 2 mt. dia out side and 4.00 mt. depth with honey combed masonary 3.50 mt. 4.00 No. 22533.10

from bottom and0.50 mt. brick masonary in C.M. 1:6 top with covered with RCC slab M200 PVC manhole cover

vent PVC pipe 1.80 mt. long 50 mm dia. & cowl vent etc. comp.

46 Providing and fixing PVC manhole cover 60x45 cm size with frame including fixing in slab etc. complete. 4.00 No. 732.25

47 Providing and fixing M.S. grills / Gates of required pattern to brick walls / Columns prepared with M.S. flats, angles, 1728.00 Kg. 124.23

Square / round bars, square pipes, at required spacings with necessary hold fasts as per detailed drawing and

fixing brick walls / coping / columns etc. complete including painting two coat & applying primer coat.

(A) Ornamental Grill

48 Providing 6.0 Kg f/cm2 working pressure polythelene pipes of the following outside dia. Low density, complete with 40.00 Rmt. 220.18

special flange compression type fittings wall clamps etc. including making good the wall, ceiling and floor including

Lowering, laying in TRENCHES and jointing PVC pipes and specials of following class and diameter including cost

of conveyance

49 Providing 6.0 Kg f/cm2 working pressure polythelene pipes of the following outside dia. Low density, complete with 40.00 Rmt. 452.48

special flange compression type fittings wall clamps etc. including making good the wall, ceiling and floor. including

Lowering, laying in TRENCHES and jointing PVC pipes and specials of following class and diameter including cost

of conveyance

50 Providing and Construction of Junction chambers of size 0.35 x 0.35 x 0.60 mt. with Foundation Concrete in CM 16.00 No. 1440.26

1:2:4 10 Cm thick, Half Brick Masonary wall in CM 1:4, 50 mm thick Flooring in CC 1:2:4 Inside Plaster 15 mm thick

in C.M. 1:4 including connecting of rainwater pipe as per detailed drawing and as directed by Engineer in charge

51 Providing and constructing filter chamber of size 2.06 x 1.21 x 1.20 mt. with Foundation Concrete in CM 1:2:4 12.5 4.00 No. 11757.41

Cm thick, 23 cm thick Brick masonary in CM 1:6, Half Brick Masonary Partition wall in CM 1:4, Inside Plaster 15 mm

thick in C.M. 1:4 and cover slab 10 cm thick in CM 1:2:4 with necessaary reinforcement and Filling 30 cm with 25 to

40 mm size Kapachi and Coarse sand for 90 cm as directed including connection rainwater pipes as per detailed as

directed by Engineer in charge including cost of labour and material.

52 Providing water harvesting pit of 2.00 mt x 2.00mt x 4.00 mt. size for water logging with excavation in any strata upto 4.00 No. 7071.01

four meter depth, filling the pit with B.T.Metal 40 mm in 0.60 mt. depth with 25-40mm kapachi, 0.30 mt. depth and

mt. depth with coarse sand in layers including making P.V.C. line for water inlet etc. as directed with 250mm dia bore

35 mt. depth and 150mm dia P.V.C. pipe of 10 Kg. f/Cm2 casing with gravel packing or as directed.

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

0 Electric Work 0.00

53 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV 60.00 Pt. 485.81

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H. D. Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

54 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade 8.00 Pt. 674.68

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME four or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H. D. Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

55 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS 4.00 Pt. 510.05

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

56 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden 16.00 Pt. 257.55

box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III

57 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in 168.00 Mtr. 82.82

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

58 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in 60.00 Mtr. 112.11

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

59 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, 0.00

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company mark/name

120 to 300 V, Power Factor more than 0.9, THD < 10 %,

CCT 3000 K to 6500K,

Luminaries efficacy> 85 lumens/watt ,LED efficiency-110 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux make LED used for luminaries. ( fitting required

LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings. The

0 (d) 22-24 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll 20.00 Each 758.51

0 (B) LED Lamps integral type, with PC diffuser suitable LAMP holder (b) 5 to 8 watts cat-III 16.00 Each 112.11

60 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and 24.00 Each 112.11

having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

61 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking 8.00 Each 299.97

capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Cat III

62 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. 4.00 Each 190.00

63 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with 8.00 Each 702.96

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (a) single door (IP-30) (iii)8 way

64 providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and 4.00 Each 1969.50

Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed (i) 25 Amps. DP Cat. III

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

65 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe- 4.00 Each 4591.46

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G. I. Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has

to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-

/ meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report

must be submitted. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

66 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with 8.00 Each 1948.29

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy &

30 cm. down rod erected with earthing.(Make shall be approved by Engineer in charge))

67 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each 8.00 Each 108.07

side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

68 Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, 4.00 Each 15620.66

prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi,

mention with 40 psi inline type post carbon filter auto low & high pressure switches with following size of storage

tank & LPH capacity & erected as directed

[B] 25 Ltr / Hr with 30 Ltr. Storage Tank

69 Providing, Erecting and Testing of SAMSUNG/LG or equivalent led TV 109 cm (43 inch) Crystal 4K UHD and above 4.00 Each 27270.00

Resolution: 4K Ultra HD (3840 x 2160) | Refresh Rate: 60 Hertz

Connectivity : with Wi-Fi 5, Bluetooth 5.3, and HDMI eARC, along with an Ethernet LAN Port

Operating system WebOS-linus base, /Tizen Operating system / android operating system - google ), Sound: 30 W

Speaker, with Remote, 4K upscaling - [ Approved by Competent Authority i.e. not Below the rank of Executive

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

I/am we/are willing to carry out the work at % above /below percent (should be written in figures and words) of the

* Estimated amount put to tender * Estimated amount put to tender

Deduct :_____ %below Rs.________________ Add :_____ %above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

{* Strike whichever is not applicable.}

Quantity Total Amount

Quantity Total Amount

Item Estimated But Rate In According to

Description of Item (with brief specification) Unit

No. may be more figures Estimated

or less Quantity

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as

stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Signature of contractor Deputy Executive Engineer Executive Engineer

Panchayat R. & B. Sub Division R. & B. {P} Division

Shihori Vav- Tharad