Construction of ESRs, for system improvement and zoning of distribution network in Sunabeda Municipality under State Plan, D.No.13-4215 SUJALA for the Year 2025-26

Head Work - Construction ESR with piping arrangement at Shanti Nagar Zone

Design, Supply, Construction, Testing & Commisioning of 8.00 lakh ltr capacity with 20mtr high staging RCC ESR and piping arrangement up to 5 Mtr from external face etc. all complete as per the direction of Engineer-in-charge.

Supplying all materials,labour and T&P for fabrication of 600mm dia common header and inlet and Exit 250mm dia MS pipe 12mm wall thickness as per specification and direction of E.I.C

Supplying all labour and T&P for laying trenches M.S. pipe of following dia for tapping of water from OGR & ligting to ESR (Bottom) as per specification & direction of Engineer-in-charges. (including painting) (2.nos)

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

600mm dia M.S.pipe (12.5mm thickness)

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

Supplying all materials, labour and T&P for fixing of following size sluice valve , N.R valve & Air valve with double flanged end for water Work propose for the following rating and nominal diameter Including testing of joints as per specification & direction of Engineer-in-charge (Labour charges)

200mm dia N.R. Valve

150mm dia N.R. Valve

200mm dia S.V. Valve

150mm dia S.V. Valve

Cost of valve

Cost of 200mm dia C.I. N.R. Valve (P.N.1.6) of Kirloskar / Vag/ Audco or equivalent make , Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends

Cost of 150mm dia C.I. N.R. Valve (P.N.1.6) of Kirloskar / Vag/ Audco or equivalent make , Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends

Cost of 200mm dia C.I. Sluice Valve (P.N.1.6) of Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

Cost of 150mm dia C.I. Sluice Valve (P.N.1.6) of Kirloskar / Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

Construction of brick masonry Sluice valve / Flow meter / control valve / PT etc. chamber as per P.H. design and specfication etc. all complete including covering the chamber with MS shutter with required MS febrication work with required size of MS angle / flate Construction of Meter Chamber of size [1.35x1.35x1.20mtr] (5.nos)

Earth work in all kinds of soil

Cement concrete (1:4:8) with 4cm size hard granite metal.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm)

12mm. thick C.P. in cement mortar (1:3) for brick work with punning

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Fabricating, Supplying and fixing iron shutter with iron choukat made out of 35mm x 35mm x 5mm M.S. angle, 25mm x 6mm M.S. flat, and 18 guage M.S sheet fitted with aldrop, door handle, tower bolt etc complet.

Desing & Supplying all materials, labour, T&P for construction of 5.00 x 3.00m internal dimension for Sunken Pump House

Desing & Supplying all materials, labour T&P for Construction of RCC frame structure single story with double storeyed Foundation (GF) choukidar shed cum staff room including complete as per direction of EIC. Including floor tile, wall tile, W/s & S/I system and internal electrification.

supplying, installation, testing, commission of 40 HP Centrifugal pump set having Head 70m, discharge 70 Lps of reputed make as per specification and direction of E.I.C of Kirloskar, Crompton, KSB, Wilo, Havells, Lubi make

supplying and laying of copper Armoured cable / Aluminium Armoured cable of following size as per specification and direction of EIC of Polycab India, Havells India, Finolex Cables, KEI Industries make

95sqmm 3.5 core LT copper Armoured cable

95sqmm 3.5 core LT Aluminium Armoured cable

Supplying all materials, labour, t&p and fixing of PLC Compatable ATV930- , HEAVY DUTY 145 AMP,WITH BREAKING UNIT VFD floor mounted Control Panel made out of 2MM C.R Powder coated sheet & alluminium BusBar interconnected with copper wire and lugsh having 50KA -125A MCCB including spreader link and extended ROM-1No, RYB indicator -1set, digital ammeter- 1 No, digital volt meter- 1No, 4A control sutaible for existing pump motor 40HP/30KW VFD

supplying, installation, testing, commission of of 100 KVA 3 PhaseTransformer 11/.4 KVA with Sub Station as per specification and direction of E.I.C

layiing of 11 KV line with 160 x 160mm G.I pole

Supplying all labour, materials, T&P for Main busbar with Distribution busbar with required electrical accessory i.e 200Amp MCCB 3nos, internal wire, Volt meter, Ampere Meter, 3 phase indicator lamp with required size of powder coated enclosure etc. all complete as per specification and direction of E.I.C

Laying of Distribution pipe line and other ancillary work

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Cutting of B.T / C.C. road for taking C.I. pipes through.

C.C road cutting

B.T road cutting

Supplying all labour and T&P for laying trenches certifugally cast spum (Iron) pressure pipe Class-B confirming to I.S.1536 of different dia as per specification & direction of Engineer-in-charges.

200mm dia D.I.pipe (K7)

150mm dia D.I.pipe (K7)

Supplying all labour and T&P for filling the trenches with excavated earth in layers and compacting etc. as per direction of t

he Engineer-in-charges.

Supplying all material, labour, T&P for laying in trenches D.I specials of the following diameter as per P.H. specification including carriage of materials from store to work site complete. as per the direction of Engineer- in- charge

Supplying all material labour and T&P for making of tyton joints using rubber rings of the following nominal diameter including testing of joints including cost of rubber rings as per P.H. design and specification as per the direction of Engg-In-Charge (Excluding cost of gasket)

DI – 200 mm dia

DI – 150 mm dia

Supplying all labour and T&P for conveyance of surplus earth to the out skirt of town (within 5.Km) by mechanical means

Supplying all materials, labour and T&P for fixing of following size sluice valve , N.R valve & Air valve with double flanged end for water Work propose for the following rating and nominal diameter Including testing of joints as per specification & direction of Engineer-in-charge

250mm dia Sluice Valve

200mm dia Sluice Valve

150mm dia Sluice Valve

150mm dia Pressure Reducing valve (PRV)

100mm dia Pressure Reducing valve (PRV)

250mm dia flow control valve

200mm dia flow control valve

Cost of 250mm dia D.I. Resilieng Seated Gland less Sluice Valve (PN-1.6)

Cost of 200mm dia D.I. Resilieng Seated Gland less Sluice Valve (PN-1.6)

Cost of 150mm dia D.I. Resilieng Seated Gland less Sluice Valve (PN-1.6)

Cost of 150mm dia Pressure Reducing valve (PRV)

Cost of 100mm dia Pressure Reducing valve (PRV)

Cost of 250mm dia flow control valve

Cost of 200mm dia flow control valve

Earth work in all kinds of soil

Cement concrete (1:4:8) with 4cm size hard granite metal.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm)

12mm. thick C.P. in cement mortar (1:3) for brick work with punning

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Fabricating, Supplying and fixing iron shutter with iron choukat made out of 35mm x 35mm x 5mm M.S. angle, 25mm x 6mm M.S. flat, and 18 guage M.S sheet fitted with aldrop, door handle, tower bolt etc complet.

Construction of brick masonry Sluice valve / Flow meter / control valve / PT etc. chamber as per P.H. design and specfication etc. all complete including covering the chamber with MS shutter with required MS febrication work with required size of MS angle / flate (10.nos)

Supplying all labour and T&P for laying trenches M.S. pipe of following dia for tapping of water from OGR & ligting to ESR (Bottom) as per specification & direction of Engineer-in-charges. (including painting)

250mm dia M.S.pipe (6.3mm thickness)

200mm dia M.S.pipe (6.30mm thickness)

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

150mm dia M.S.pipe (4.50mm thickness)

250mm.dia. M.S.flange (12mm thick)

200mm.dia. M.S.flange (12mm thick)

150mm.dia. M.S.flange (10mm thick)

250mm.dia. M.S Offset bend (Plain)

200mm.dia. M.S Offset bend (Plain)

150mm.dia. M.S Offset bend (Plain)

Supplying all materials,labour and T&P and making flanged joints for MS pipes and specials of the following diameter including testing of joints as per specification all complete

150mm.dia flanged joint

200mm.dia flanged joint

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

250mm.dia flanged joint

Supplying all materials, labour and T&P for connection of existing rising line and distribution line including cutting existing line as per specification and direction of E.I.C

Making inter-connection for 150mm.dia pipe line

Making inter-connection for 200mm.dia pipe line

Making inter-connection for 250mm.dia pipe line

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (10.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Filling foundation and plinth with excavated materials(in all kinds of soil)

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (10.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Supplying all materials,labour and T&P for construction of RCC thrust block as per specification and direction of E.I.C (Thrust Block for 111/ 4o to 90o Bend:-) (15.nos)

Dry stone masonry or rough stone dry masonary with granite

Supplying all materials,labour and T&P for construction of retaining wall / Guard wall for Raw water rising main for a length of 100.00m as per specification and direction of E.I.C

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (10.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

R.C.C. Retaining wall (15.mtr)

Cement concrete (1:3:6) with 4cm size hard granite metal

Cement concrete (1:1½:3) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Providing 50mm dia PVC pipe for weep holes as per direction of E.I.C

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (10.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

R.R Stone masonary work (10.mtr)

Cement concrete (1:4:8) with 4cm size hard granite metal

Random rubble stone masonry in cement mortar (1:6) in foundation and plinth

2.5cm. Dam proof course with C.C (1:2:4) using 12mm. size hard broken granite chips

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

20mm. thick cement plaster (1:6) for stone work

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (10.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Supplying all materials,labour and T&P for New Construction of C.C. Drain as per specification and direction of E.I.C (Construction of CC Drain :- 15.mtr)

12mm. thick cement plaster (1:6) on brick with Punning

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (10.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Supplying all materials,labour and T&P for Construction of C.C. Road as per specification and direction of E.I.C - Construction of CC Road. 20.00 (3.00m width)

Expansion joints (Thermocol board) as per specification and direction of E.I.C

Supplying all materials,labour and T&P for Laying of paver block in different location in Sunabeda Municipality as per specification and direction of E.I.C

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead

Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge.

Shifting House connection

Supplying all labour and T&P for fixing ferrule of the following nominal bore including drilling the water main (cast iron or pipes with metal straps) as per specification all complete

15mm dia brass ferrule

3/4" dia HDPE pipe

1" dia HDPE pipe

Cost of materials.

Cost of 250mm dia C.I mechanical joint socket

Cost of 250mm dia C.I mechanical joint Collar

Cost of 200mm dia C.I mechanical joint socket

Cost of 200mm dia C.I mechanical joint Collar

Cost of 150mm dia C.I mechanical joint socket

Cost of 150mm dia C.I mechanical joint Collar

Cost of C.I. specials

PLC-SCDA I&C system

Level Transmitter - Designing, Supplying, installing,commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range - 0.5 mtr Output - 4.20 mA/HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/1 0.25% of full scale or batter Enclosure - IP 68

PLC panel for Clear water pump House with two Pumps :- Design, manufacture, supply,installation, testing and commissioning of indoor type PLC panel of size approx. 1000mm X 700 mm X 1500mm (LBH), fabricated out of min. 2mm thick CRCA sheet powder coated to Siemens gray color.The Panel shall be provided with reputed make PLC with following accessories as well as input output configuration. The PLC shall be programmed with IEC 61131 standards for control, monitoring and communication of equipments & ins

Supply, installation and commissioning of LT surge arrester having 5KA capacity with spike and all accessories including cost of all materials, labour, T&P etc all complete.

Pressure transmitter - Desgning, supply, installation, commissioning , testing of pressure transmitter CE marked with following techical parameter at Clear water pump house and interfacing with PLC panel including mounting arrangement along with snubber and needle valve 1.0sqmm 2 core copper braidder screen cable wire, screw, grip & clamp for DI / MS pipe fittings Output - 4.20mA/HART Power supply - 24V DC ext. Display - 4" LED Accurcy - +/- 0.1% of full scaleor better Encloser - IP 68

Pressure Gauges: Provision of Glycerine filled pressure gouge with fittings & isolation ball valve with socket including cost of all materials, Transporation to site etc, all complete all labour, T&P etc. All complete as per the direction of E.I.C

Full-Bore Electromagnetic Flow Meter - Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25mtrs built in GSM/GPRS ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications.

250mm dia Electromagnetic flow meter

200mm dia Electromagnetic flow meter

UPS - Supply, installation and commissioning of single phase 1 KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance fee battery system including cable power plug, switch having application in 24V lot DC battery (Drytype) charging to output continuous 3 hrs power backup all complete work (WTP-1 & MCC ROOM-1 Distribution-6)

GSM/GPRS modem - Supplying , Installing and Commissioning of SMS based ON / OFF operation of pumps at remote locations with test & trial including one year guaranty & two year comprehensive maintenance including SIM card & SMS charges. Wireless Motor Controller is suitable for all range of electrical motors and starters and pump sets. It shall protect pump set from dry run. Controller shall have inbuilt battery and charges automatically. Controller shall be controlled through SMS, Call, IVRS or Smart Phone application (All controlling modes are must). It shall have following features as, a. Auto Mode operation – Pump shall

Instrumentation, control and power XLPE cables along with the cable tray, glands, lugs and other accessories for interfacing the instruments at remote station with the RTU as per the technical specifications of Power Cable

Power Cable -ditto-4 core 4 mm2 copper cable

Control Cables-ditto- 3 core 1.5 mm2 copper cable

Control Cables-ditto- 6 core 1.0 mm2 copper cable

Control Cables-ditto- -2 core 1.0 mm2 copper cable

Instrument Cable- ditto- 2 Pair 1.0 mm2 cable

OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer.

HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work)

Supply, installation, of online chlorine turbidity & PH analyser with following technical specification (ABB/E & H/Forbes marshall) a) Chlonne sensor, b) Battary 4x19AN, c) 5 Micron Cartridge filter, d) 4G Modem with GSM/Ethernel/Fibre output, e) FRP/Stainless Enclosure, f) Flow cell for chlonne & Turbidity Sensor, g) Turbidity sensor with RS 485 Modbus output, h) PH sensor, i) controller 4 channel

Providing, installing & commissioning with satisfactory test & trial Chlorine/ sodium dichoroisocyanurate dosing portable water chlorination system ( Semi automatic ) having chlorine as a sodium dichoroisocyanurate with following components, Capacity 10gm/hr. to 250gm/hr. Sodium Dichloroisocyanurate Dosing Potable Water Chlorination system: (Semi Automatic). Providing installing and giving satisfactory testing of Sodium Dichloroisocyanurate Dosing Potable Water Chlorination system: (Semi Automatic). Chemical dispenser equipment using chemical having ingredient base of Sodium Dichloroisocyanurate. Chemical dispenser to prepare fresh 0.3% to 5% as chlorine solution. Chemical dispenser should consist of controlled Dispensing of Sodium Dichloroisocyanurate through a Feeder mechanism to a solution preparation tank. At solution preparation tank controlled proportionate amount of water shall be mixed to give required percentage of Chlorine solution. Dosing metering

pump should give the accurate online and continuous dosing of chlorine in the water to be chlorinated. Water level at solution preparation tank is to be controlled by level switch and solenoid valve. Suitable control system for water pressure control to dosing pump. Electronic Solenoid Driven dosing pump for Digital Proportional Dosing Control System should offer the facility of on-site digital dose rate setting in Ltr/hr with display. Dosing chlorine solution at inlet of water storage tank/sump/online The electronic chemical dosing device of the plant should be capable of proportional injection of chemical solution. It should offer dosing pump of 6LPH @ 4kg/cm2 injection pressure. All automatic operations are PLC controlled with HMI provided Mandatory Accessaries: 1.SMPS-1- 110V to 270V with two phase. 2. Voltage Stabilizer- Panel parts, Voltage stabilizer of 6AMP @230V. 3.Pressure Switch – Range: 0.5- 5 kg/cm2. Plastic wetted parts, with extruded aluminum body with adjustable scale Interlock :- Interlock will stop the dosing pump when 1. No water level at solution preparation tank 2. No water at inlet of the machine Interlock will automatically start the dosing pump when above issues are resolved. Chlorine Test kit to be provided for suitable to measure residual chlorine upto 5ppm Capacity Min: Chlorine 10gm/hr to Max. Chlorine 250gm/hr

Surveillance System :- Desiging, supplying, installing, commissioning & testing of CCTV IR water proof camera suitable for upto 100ft. with control key board, DVR, Hard Disk,cables, UPT transreceivers etc. complete with not less than following specifications. 1. Four numbers of IP Camera with night vision functionality with range up to 30 meters. Camera construction shall be suitable for weather proof outdoor installation. 2. Eight Channel DVR with metal body construction, having software features of motion detect recording. 3. 3.5 inch 2 GB HDD 4. 8 port POE Switch 5. 32 inch LED Screen, Keyboard & mouse.

250mm dia M.S.pipe (6.3mm thickness)