Construction of CAD and WM works of Karanjiya Minor off-taking at RD-3090m from Gidhibas Distributary of Pani Panchayat No-21 and 22 of KMC under Kanupur Irrigation Project

Excavation, loading, unloading and carriage by mechanical means of all kinds of soil including stony earth, gravel, moorum, etc. interspread with boulders up to 1/2 cum size with all lifts and delifts including trimming of slopes and bed to design section and depositing the excavated materials away from work site as per specification as directed by the Engineer-in-charge within an initial lead of 1km from the place of excavation etc. complete.

Supply and filling foundation and plinth with sand by mechanical, laying in layer duly compacted, including cost of watering, eamming with all leads,cost, carriage, royalty of materials, cost of labour cess and all cost incidental to work etc complete as per the specificaton and direction of the Engineer-in-charge.

Cement concrete (1:3:6)with 40mm size hard granite metal with watering and curing including cost,conveyance ,royalty of all materials ,labour ,T& P etc complete and as per the direction of the Engineer-in-Charge.

R.C.C. work of M-15 grade with 20mm down graded hard black granite CB chips with watering and curing excluding shuttering but including cost,conveyance ,royalty of all materials ,labour ,T& P etc complete . As per direction of Engineer-in- Charge.

Providing formwork for concrete with F1 finish for upstream faces of dam,spillway,glacis of barrage,unexposed surface of foundation,block joints etc with steel shutters ,rigidly fixed and removal of forms and making good to the surfaces where necessary complete with all labour,materialss and T & P complete as directed by the Engineer-in-charge.(Inside)

Rigid and smooth centering and shuttering for C.C. / R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.(A)For R.C.C foundation,plinth band and footings base of columns ,mass concrete precast slabs etc. (Outside)

Supplying, cutting, bending, binding & placing Uncoated HYSD bar reinforcement complete as per drawing and technical specification, including cost, carriage, royalty of all materials and labour etc. complete as per the direction of Engieer-in-charge.

Providing and laying RCC hume pipes of 300mm dia NP3 in position on properly prepared approved surface including cost, carriage, royality of humepipes and cost of labour etc complete as per the direction of the Engineer-in-Charge.

Filling foundation and plinth with excavated material with well compacted etc. complete as per the direction of the Engineer-in-charge.