GE/KHU-90/2024-25 GE/KHU-90/2024-25 REPAIR/ REPLACEMENT FENCING GATES, HARDSTANDING, CHEQUERED/ INTERLOCKING TILES CULVERTS, DRAINS AND PROTECTIVE WKS AT KHALTSI, LAMAYURU AND ACHINATHANG IN THE AOR OF AGE B/R-II KHALTSI UNDER GE KHUMBATHANG

Amount

Dismantling old posts or struts (wood, steel or RCC) embededed in Concrete, brick work, masonry, etc any section, including taking out embedded portion including necessary excavation & prepration of post holes and removal of surplus excavated material from site complete all as specified and directed.

M&L for Cement Concrete type D-2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed.

S&F for mild steel angle, flat iron as in post & strut including cutting tops to shape, drilling holes, notching for wire, incl flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and nosing to steps including embeding in concrete etc or similar work conforming to Fe 290 Gde 165 complete all as specified and directed.

Dismantling of fencing wire mesh barbed wire,chain link etc, complete all as specified and directed.

Supply only Galvanized chain link fencing of any size any type confirming to relevent IS including line wires, any mesh, size and type, fixed to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wirers ,any mesh any type of standerds,rails ,straining bolts etc including provn of binding wire complete all as specified

S&F in repair Mild steel Round bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specifierd and directed

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for prepration of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint (finising coat) over one coat of primer ot steel surfaces complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type E-2 1:5:10 (40mm graded aggregate) as in sub base to floor, in foundation or mass filling or similar works complete all as specified and directed.

M&L for 25 mm thick sand cushioning under floors complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver blocks of any shape and size of M-35 grade confirming to IS 15658 - 2006 filled with grey cement and pigment

M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base to floor or for laying of floor finishes or similar works complete all as specified and directed.

M&L coloured chequered cement concrete tiles of size 300mm x 300mm x 20 mm, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors thick laid over and including 20 mm thick screed bed in CM 1:4 bedded and jointed in neat cement slurry complete all as specified and directed.

M&L for 150 mm thick Cement concrete work type B-1 (1:2:4) (using 20mm graded aggregate) for pavement/ hardstanding and flooring or similar works finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for 100 mm thick Cement concrete work type B-1 (1:2:4) (using 20mm graded aggregate) for pavement/ hardstanding and flooring or similar works finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10 mm wide, filled with sealing compound, Grade 'A' complete all as specified and directed.

Deduct Credit for Demolished/Dismantled material Rs (-) 66896.68 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

HARMEET TRADERS (BID ID -3265567)

M/S Deldan Namgail (BID ID -3267999)

M/S DUTTA ENGINEERING WORKS (BID ID -3267091)

M/S MOHD HUSSAIN (BID ID -3262973)

M/S TRADE LINK (BID ID -3263021)