CA NO.CWE BLY/GE (W)/90 OF 2025- 2026PROVN OF ADDL OFFICE SPACE NEAR BLDG NO RA-3 AT HQ UB AREA UNDER GE WEST BAREILLY

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5m depth and n.exc 1.5m width for foundation etc and getting out complete all as specified and directed

M&L Treating the back fill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured and along the perimeter of floor etc) complete all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface ( floor, plinth protection and external perimeter etc) complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (Design Mix)(using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished surface, square, rectangular or polygonal complete all as specified and directed.

M&L For RCC M-25 (Design Mix)(using 20 mm graded stone aggregate) for columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for formwork to sides of pillars,posts, struts, piers, columns and stanchions on rough finished surface, square, rectangular or polygonal complete all as specified and directed.

M&L RCC M-25 (Design Mix)(using 20 mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc on rough finished surface, square, rectangular or polygonal complete all as specified and directed.

M&L for RCC M-25 (Design Mix)(using 20 mm graded stone aggregate) for Chajjas complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges on rough finished surface, square, rectangular or polygonal complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for brickwork with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in (1:6) including all quoins, arches, pillars etc at any floor/height complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick in cement mortar 1:4 complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 20 mm thick PCC 1:2:4, type B-0 (using 12.50mm graded stone aggregate) as in floor complete all as specified and directed.

M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed cement mortar 1:6 complete all as specified and directed.

All as per serial item No. 20 above but as in vertical surfaces over and including rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified.

M&L rendering 12mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces complete all as specified.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with WPC @ 200ml per bag of cement or as per manufecturer instructions by the weight of cement used and finishing even and smooth without using extra cement complete all as specified and directed

Supply only liquid water proofing compounding complete all as specified and directed.

M&L preparation and necessary cleaning of surface free from dust ,loose paint etc by skilled labour and applying two coat of OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over one coat of cement putty of 1.5mm thickness complete all as specified and directed. Note:-Application to be done through authorised applicator of manufacturer complete all as specified and directed

M&L applying two coat of 1.5mm thick white putty on new surface and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and as mentioned in PS and accessories and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish, should be able to spray in hard to reach areas and penetration of paint, on the surface to achieve excllent application using limited manpower complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 all as specified or as directed.

S & F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including one shop coat of Zinc Chromate Primer including preparation of surface complete all as specified and directed.

S &F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed.

M&L for plain cement concrete 1:1.5:3, type A-1(using 12.50mm graded course aggrigage) as in bed block complete all as specified and directed

M&L for preparation to new steel surfaces exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F false ceiling at all heights with GRG (Glass FibreReinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as specified and directed. complete all as specified and directed.

Supply and fixing factory made uPVC frame of size 125x60mm approved colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastener s, all complete and as directed,

M&L for 20mm thick Granite (colour as approved by accepting officer ) machine cut and machine, polished,and moulding, door and window cills, jams, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as spd and directed.

S&F 25 mm dia SS 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point and filling under the floor complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed

M&L for one light /fan point controlled by one switch point wiring with and including multi stranded copper conductor 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volt grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20 mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable, 1100 volts grade, ISI marked with CML number as continuity edarth wire terminating with nedw sunken concealed terminal boxes complete all as specified and directed.

All as per item No. 41 above but One 3 pin, 5 Amps, socket outlet on the same board, controlled by another switch.

All as per item No. 41 above but multi pin socket outlet, 5 Amps, on independent board.

M&L for point wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated unsheathed FRLS cable 1100 volt grade ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20 mm bore including cutting chases for condiuit and sinking for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core PVCX insulated unsheathed FRLS cable, 1100 volt grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as speciifed and directed.

S&F for switch piano. Flush button, single pole, one way 15 Amps complete all as specified and directed.

S&F for socket outlet 15 Amps complete all as specified and directed.

S&F for switch piano. Flush button, single pole, one way 5 Amps complete all as specified and directed.

S&F for socket outlet 5 Amps complete all as specified and directed.

M & L for ceiling fan regulator, Electronic steped type, AC, 230 volts complete all as specified and directed.

S&F for ceiling rose, 3 treminal, any shade of PVC/Polycorbonate, isolated body complete all as specified and directed.

S&F for flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar earth bar and neutral links complete all as specified and directed.

S&F MCB, type curve 'B' , 10 KA SP 6 to 32 Amp complete all as specified and directed.

S&F MCB, type curve 'C' , 10 KA SPN ``32 Amp complete all as specified and directed.

S& F TPN DB-VTPN DB 4 way suiatble for MCCB 125 Amps 415 volts, 3 Phase, 4 wire, AC 50 Hz having aluminum Bas bar Phase and the neutral inslutad with PVC sleeves connected with appropriate size copper thimbles complete all as specified and directed.

S&F MCCB Tripple pole, 125 Amps 415 volts curve 16 KA complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCB/DB’s earth test point all as specified or indicated including testing on completion .

S&F LED light fitting, high lumenous housed in extruded from powder coated aluminum, 2X2 36 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion complete all as specified and directed.

S&F BLDC ceiling fan complete with blades down rodes 230 V 1200 mm sweep complete all as specified and directed.

Supply and laying & testing XLPE UG Cable, insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volt grade with stranded alumnium conductor, of size 50 sqmm 3.5 core complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5m depth and n.exc 1.5m width for laying of LT UG Cable/Base for pole etc and getting out complete all as specified and directed

M & L for sand cushioning laid in trenches for laying of LT UG Cable complete all as specified and directed.

M & L for modular bricks common burnt clay building bricks, sub clasds 'B' designation-75 for LT UG cable protection complete all as specified and directed

S&F GI tubes light grade of dia 80 mm with all fittings and fixed complete for protection of LT UG Cbale fixed to walls or laid in floor or along with poles etc complete all as specified and directed.

khanna construction (BID ID -3493211)