Providing and Placing Partition ILR Office at Taluka Seva Sadan Olpad, Tal.Olpad, Dist.Surat.

Name of Work :- Providing and Placing Partition ILR Office at Taluka Seva Sadan Olpad,

Tal.Olpad, Dist.Surat.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Items Description of Item (with brief specification and reference to Quantity Unit Rate In Amount

No book of specifications) figures

1 Dismentling doors, windows, ventilators etc. (wood or steel) 3.00 Nos. 263.75

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and

lift.(i) exceeding 3 Sq.M. in area.

2 Brick work using common burnt clay building bricks crushing 3.00 Cumt 4503.04

strength not less than 35 kg/sq.cm. in foundation and plinth in

cement mortar 1:6 (1 cement : 6 fine sand)(B) Conventional For

3 Providing 15mm thick cement plaster in single coat on Rough 24.00 Sqmt 161.20

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand)

4 Providing & fixing in position alluminum partition & Door with 55.00 Sqmt 2896.68

standard extruded colored anodized alluminum of approved color

alluminum pipe size 63mm x 38mm x 2mm thick make a frame

vertical and horizontal grid distance as shown in drawing with

panel of 4 mm thick alluminum hardner sheet or 4 mm thick

alluminum hardner sheet and 5mm thick transparent float glass as

directed with glass film fixed with transparent silicon rubber

gasket in panel with glazing clips 19 mm x 19 mm in size .

partition opening door shutter /sliding shutter having a styles

mm x 50mm x 2 mm thick in style and top ,bottom and middle

rails 85 mm x 50 mm x 2 mm thick size with anodized alluminum

heavy handle, stoppers, Aldrop, hinges , lock , door stopper

fixtures and fastening with required all labour and equipment and

including rebar up to slab level in half partition and as per

detailed drawing as directed with all lead and lift.

5 Providing & fixing for making partition (including 12 mm Glass 95.00 Sqmt 4054.14

& door with Floor Spring) having 12 mm thick Marin plywood

both side of aluminum framing. Aluminum framing size for

vertical & horizontal support is 50mm X 50mm (5.50gm/cmt)

made by aluminium jindal section of 16guage having grid of

600mm X 600mm and all exposed surfaces finished with

mm thick laminate of approved shade without any air gap and

grooving as per design. Before installation, make hole /face plate

for conduit pipes of electical/networking cables with open able

stud from partition including all materials and labor etc. Make

necessary grooves as per shown in drawing. All bottom ends are

covered with Ghana teak bidding patti finished with laminate

complete with all necessary hardware & adhesives as per details

given in drawing and as per instructions of Engineer in charge.

Contractor has to provide all necessary cut outs ( race ways .) for

electical works & no extra payment shall be made for it.

Items Description of Item (with brief specification and reference to Quantity Unit Rate In Amount

No book of specifications) figures

6 Providing & fixing Office Table size 1.80 x 0.90 x 0.75 mt made 12.00 Nos. 15956.99

of 19 mm thick allproof plywood including three drawers and one

cabinet inclduing 1 mm lamination in single or double shade &

colour as directed on all visible face and 0.80 mm white

lamination on all non visible faces Hettich make telescopic

sliding channel, Enox make S.S. sliding rail, S.S. Decorative

handle, Ebco make Keyboard tray with necessary fixtures &

fasteners of standard make as per detail drawing and image also

including all labours as approved by engineer-in-charge etc.

complete. Total

(Rupees Seven Lakhs Fifty-four Thousand One Hundred Thirteen and Paise Seventy-five Only.)

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words)

at the estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 754113.75 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.2450.00 (Rupees Two Thousand Four Hundred

Fifty Only) shall be recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S

(M.GUJ) with detailed specification and details of work and amount Involved at site without any payment as

directed by Engineer-In-Charge.

3 All work shall be carried out as per public work department hand book and other specifications of Division or as

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck

by Contractor under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good

for work under all condition, site, moisture / weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per

Government Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately

on recommanding the work order.

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in

GERI by Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of

the Amount put to Tender.

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-

M(3)Dated 9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou &

Employment Department Letter no GWA/2004-841M(B) Dt 14/12/2005 & Dt.30/1/2006.

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of

difference of Cement Difference shall be deducted from the rate of original item at the rate of star rate

mentioned in the tender.

10 Contractor are advised to visit site before loading tender rate.

Items Description of Item (with brief specification and reference to Quantity Unit Rate In Amount

No book of specifications) figures

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation

and drainage & water supply connection and minor correction to perform experienced in Lab shall be done by

contractor at his risk and cost.

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

(A) I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation

regarding materials,Labour and other factors pertaininfg to work before submitting tender.

(B) I/We hereby Declare that I/we have carefully Studied the condition of Contracts, Detailed Specification and

other tender Document of this work and agree to execute the same accordingly.

Signature of Bidder

Deputy Executive Engineer

Surat (R&B) Sub Division No.3,

Executive Engineer

Surat (R&B) Division No.2,