Strengthening of Existing School (Secondary) OPENING OF NEW /UPGRADED SCHOOLS -NR (Secondary )(Class IX-X)MS CHOKIYAL (under AWPnB Samagrah Shiksha)

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

ORDINARY ROCK 10%

ALL KINDS OF SOIL 90%

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.

Disposal of excavated earth including all type of carriage and lead up to avg. 5.0km

DUmping stone including cost of stone (on horizontal soling)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:3:6 ( 1 cement : 3 course sand : 6 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 ( 1 cement : 6 course sand)

Dry random rubble masonry with hard stone in foundation and plinth:With bond stone, quarry stone

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Mud Mat

Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(Main Entrance Landing/ Ramp landing)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete.

Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms.

Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including shuttering propping etc and removal of form for Stairs (excluding landings) except spiral staircases.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Complete job. Truss Area = 4400sft or @43 KG/SQM

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Area =4000 sft or 389.63 sqm

Providing ridges or hips of width 60cm overall width plain G. S. sheet fixed with poymer coated J. or L hooks, bolts and nuts 8mm G. I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275gm /m2 specifications as per engineer in charge

Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement,masonry up to floor five level including hoisting and setting in position in mud mortar using approved quality mud with carriage ofmaterial complete.

Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windowscomprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andsilicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.

Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windowscomprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusionwelded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andsilicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wallthickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Providing and fixing DGU ( with <0.25 SHGC and >0.35 VLT glazing in uPVC window, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with <0.25 SHGC and >0.35 VLT)

TOUGHENED DGU glass panes filled with argon gas of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge Qty vide window openings @90%

Providing wood work in frames of doors and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately)

Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class wood 35 mm thick shutter)

Providing fixing paneling and glazing in panalled or panalled glazed shutters for door/windows 25mm to 40mm thick of 1st class kail wood.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo/fir wood

Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood

Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge.With resin bonded rock wool with density 48 kg/cum

Providing and fixing 19 mm thick plywood of appoved brand (Century Ply Or Greenply Industries Limited (GIL) Or any approved Brand ) and manufacture including fixing of decorative laminate sheet over 19mm ply using synthetic resin adhesive , nail,screws,hinges ,Handels , Ball Bearing Telescopic Channel (Godrej or any other approved brand) and carriage all complete.

Providing and fixing 6 mm thick plywood of appoved brand and manufacture including nail,screws and carriage all complete.

CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

MARBLE STONE FLOORING Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm

P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make

Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make

P/F Stainless steel 304 Grade kitchen sink Square Shaped Double Bowl Kitchen Sink 47 X 20 X 9 Inches Vessel Sink (Steel) of approved brand and manufacture Hindware/Jaquar/Imperio/Kaff or any approved brand as per Engineer In Charge

P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm

Hi-Flow MP1- 2 HP Centrifugal Pump Havells/Crompton/kirloskar (Note :Pump should be minimum BEE 3 star labelled or above)

Providing and fixing soil waste & vent pipe

PVC Pipe. 110mm dia (10 feet unit Length)

PVC Pipe. 75mm dia (10 feet unit Length)

PVC Bend 110mm dia

PVC Bend 75mm dia

PVC Tee 110mm dia

PVC Tee 75mm dia

PVC Collar 110mm dia

PVC Collar 75mm dia

PVC trap 110mm dia

PVC trap 75mm dia

PVC Socket 110mm dia

PVC Socket 75mm dia

PVC door junction 110mm dia

PVC door junction 75mm dia

Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

P/F CP brass toilet paper holder including cost of wodden,PVC,play etc.

Providing and fixing Wall mount Liquid Soap Dispenser of approved brand

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required.

L-Drops for room door

Handles for door

15 mm C.P. brass tap with elbow operation lever

15 mm C.P. brass 2 in 1 tap

Handles with lock system of main doors ( Godrej Make)

Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab bars Near EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification.

Providing and fixing Stainless steel SS-304 Grade Foldable Grab bar For Disable-friendly Bathroom/toilets Make: Jaquar/ Equivalent per standard and specification.

Supply and installation of Concealed Mixer and Divertor For Bath and Shower System (Mixer and Diverter including Single-control Recessed Bath And Shower Valve) including bath spout and Square Shape Single Flow Overhead Shower 150 MM X 150MM of approved/Premium quality and make (JAGUAR/CERA/ KOHLER Or Equivalent ) as per the direction of engineer incharge

Supply installation testing and commissioning of Instant Gyser various Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete 15Ltrs

Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge

Placing and fixing of 25 mm dia. 2mm thick ISI marked, PVC conduit pipe for carrying electrical wiring in the slab with light box and fan box complete job

Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia > 50mm , two number intermediate Horizontal tubes Dia >25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post )

THERMAL INSULATION

Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)

Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm > Rock Wool 50mm > Alumunium Duct Clading 0.46mm to 0.71mm)

Miscellaneous

Supplying, installation, testing and commissioning of grid interactive rooftop solar photo voltaic power generation system including space frame

Sub Head-1

Internal Electrification

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Existing surface/recessed medium class PVC conduit ,with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. (Make Havells/Polycab/KEI Group A)

Wiring for circuit/sub mains wiring along with earth wire of the following size of FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required.(Make Havells/Polycab/KEI)

2x2.5 sq.mm +1x2.5 sq.mm earth wire.

2x4 sq.mm + 1x4 sq.mm earth wire.

2x 10 sq.mm + 1x6 sq.mm earth wire.

2x 16 sq.mm + 1x6sq.mm earth wire .

Sub Head-2

Supply, installation,Testing & commissioning of Internal lighting fixtures

Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD < 10 % ,p.f.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.

LED 15 W surface panel of lumen more than 1100 Round Shape.

LED 12 W surface panel of lumen more than 1100 Round Shape.

10W LED Surface Ceiling mounted

2x2 36 W LED Surface Ceiling mounted (At Science Lab,Library,Hall,Office,HM Office)

Sub Heads-3

Supply installation of E Fan,C Fan,W Fan

P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.(Make: Havells USHA/Bajaj)

Sub Heads-4

Gi Box along with modular base & Cover plates

S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel)

1or 2 module (75mm x 75mm)

3 module (100mm x 75mm)

4 module (125mm x 75mm)

6 module (200mm x 75mm)

8 module (225mm x 75mm)

Sub Heads-5

Modular Switches/Sockets

S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. (Make: Havells Crabtree/Legrand/Greatwhite/CONA/Gold medel)

6 amp switch

16 amp switch.

3 pin, 6 amp socket outlet

6 pin, 16 amp socket outlet

Indicator lamp/Blank

Sub Head-6

MCCB & MCB Distribution Board

Supplying and fixing of following ways surface/recessed mounting vertical type 415V,TPN MCB Distribution board of sheet steel dust protected duly powder painted,inclusive of 200 A Tinned copper bus bar common neutral link earth bar din bar for mounting MCBs (but without MCBs and incommer) as required (Note Vertical type MCB TPDB is normally used where 3 phase outlet are required) (Make: Havells/ V Guard/L&T/ C&S)

8 Way (4+24) Double door TP&N

MCB Distribution Board: S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways : (Make: Havells/C&S/L&T)

18 Way double door SP&N

16 Way double door SP&N

14 Way double door SP&N

10 Way double door SP&N

Sub Heads-7

Miniature Circuit Breaker/RCCB Residual Current Circuit Breaker/Double Pole Miniature Circuit Breaker

S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: (Make: Havells/C&S/V Guard)

Single pole 6A, SP MCB

Single pole 16A, MCB

Double pole 40A, DP MCB

Double pole 63A, DP MCB

200A ,4p changeover Switch

Sub Head-8

Main LT Panel

Main Panel LT SITE of 320 A Bus bar Chamber with Incomer MCCB and Circuit breaker having the following specification TPN Aluminum Bus bar size: 30mm x 10mm with colour coded PVC Sleeves: (Take Bus-Bar Density:08A/ mm) Incomer : 200 Amp 4p,35KA MCCB ………….. 01 No Outgaing: 63 Amp DP MCB …………………....04 No Outgaing: 40 Amp DP C/O MCB………………...04 No Voltage Amps frequency Digital Meter ……..…01 set CT Ammeter 350 Amps ………………………….01 set R Y B Indication light …………………………… 01 set

Sub Head-9

Security (CCTV) System

Supply, Installation, Testing & Commissioning of 5 MP IR Fixed Dome Network Camera -1/2.7″ Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), Alarm : 1 inputs & 1 outputs, Audio: 1 input & 1 output, Built-in Microphone, , IP67, IK 10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Face capture, Region entrance detection, Region exiting detection, Video tampering, Audio exception detection, Focus on human and vehicle targets classification based on deep learning UL, CE, FCC certified.

5 MP Varifocal Bullet Network Camera -1/2.7'' Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.7 to 13.5 mm Varifocal Auto iris lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, BLC, HLC, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 60m, Support on-board storage up to 256 GB (SD card not included), Alarm : 2 inputs & 2 outputs, Audio: 1 input & 1 output, IP67, IK10, Edge Analytics- Line crossing detection, intrusion detection, Scene change detection, Motion detection, Face capture, audio exception detection, Video tampering, Region entrance detection, Region exiting detection, False alarm reduction through human and vehicle target classification, UL, FCC, CE certified.

16 Port unmanaged Network PoE Switch L2,Unmanaged 16 Gigabit POE ports,2 Gigabit SFP uplink ports,802.3 af/at PoE Power budget 125w

4TB Surveillance Hard Disk

32ch Network Video Recorder- Connect Up to 32 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, Atleast one HDMI output of 4K resolution, atleast one VGA output with output upto 1920 × 1080, Support H.265, H.264, MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD upto 10TB, RS-232; RS-485, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.

Display 32.5" 1080P, HDMI/TV,VGA input, view angle:178°/178°, 300cd/㎡, plastic casing, VESA, base bracket included, 7*24h

supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required.

Supply and laying of Cat 6 4 Pair data cable existing conduit complete as required

Sub Head-10

Electric Convector Heater with Technical Specification

Supply installation testing & Commissioning of Electric Convector Heater Rated power 650w X 4 = 2600Watt @230 Volt 50/60hZ. Over heat protection thermostatically controlled,Detachable wall mounting bracket,digital LED Display,digital room temperature sensor,silent operation totally silent operation of heater & thermostat,(comes with a one year manufacture guarantee),Width 1200mm Height 450mm Depth 90mm,weight 16kg with standard packing,Rated power 650w x 4=2600 Watt@230 Volt 50/60hz. (Comes with 5 year warantee) Energy Consumption 1) 1 No of Heating Panel 2600W 2) Total no of Heating Panel installed 66 Nos 3) Energy Consumption in 1 hours 2.6 Kwh x 66 = 171.6 Kwh (Energy Consumption of 66 Panel in 1 hour = 171.6 Kwh) ( 1 Year Guarantee) ( 5 years Warantty)

Sub Head-11

Charcoal/Salted EARTHING

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I Pipe in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Sub Head-12

Supply & Laying of Armoured Cable & End Termination

Supplying and laying following size and specification of XLPE insulated PVC sheathed armored cable with aluminum conductor for working voltage 1100 V grade as per IS: 7908, including thimble/lugs, double compression glands etc.of respective size. (Make: Havells/Polycab/KEI)

3.5C x 95 Sq.mm Armored Al. cable

Sub Head-13

Electrical Heavy PVC Conduit Pipe

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 10 x 10 x 10 cm of concealed box

Please Enable Macros to View BoQ information