PERIODICAL SERVICE (INTERNAL AND EXTERNAL) TO CERTAIN BLDGS AND OTHER MISC WORKS AT COOCHBEHAR MIL STN UNDER GE (S) BINNAGURI

Amount

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including steel pin and hackingout old broken glass panes complete all as specified.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane including steel pin and hackingout old broken glass panes complete all as specified.

Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 150 mm size aluminium handles cast type anodised complete all specified

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all specified

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all specified

S&F 140mm (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor vcomplete all as specified.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or iron angle with and including 6mm thick teak wood lipping all around duly painted colour to match with particle board as in cupboards etc including taking down old boardings etc complete all as specified. Note: Cost for fixing of writing shelves on angle iron with screws shall deemed to be including in the quoted rates noting extra shall be admissible to the contractor on this account.

M&L for second class hard wood in scantling, clean sawn, fixed with nails complete all as specified including dismantling old scantling complete all as specified.

S&F 20mm thick second class hard wood clean sawn boarding, plained both sides with and including 6mm thick teak wood lipping on front face, fixed with nails in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and frame work for kitchen cup boards similar work including taking down old boardings etc complete all as specified

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 including dismantling old iron and making good with PCC (1:2:4) and finished wall with mathing to existing wall surfaces complete all as specified

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Demolition of cement concrete of any position and description.

M&L for 100 mm thick cement concrete type (1:4:8) D-2 (using 40mm graded crushed stone aggregate) as in sub base finished even and fair complete all as specified.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified

M&L for providing, cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary use and waste of formwork complete all as specified.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified

M&L for 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified

S&F 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified

M&L for preparing of old oil bound distempered surfaces of wall including cornices, pilasters, and other wall features etc by washing, rubbing down and stopping and applying one coat of oil bound distempering (oil emulsion) on the same including chak whiting on plastered surfaces, prepara-tory to distempering complete all as specified.

M&L for preparing of old oil bound distempered surfaces of wall including cornices, pilasters, and other wall features etc by washing, rubbing down and stopping and applying two coat of oil bound distempering (oil emulsion) on the same including chak whiting on plastered surfaces, prepara-tory to distempering complete all as specified.

M&L for preparation of the surface and applying 1.00mm thick (average thickness) wall care putty on wall complete all as specified .

M&L for preparing old decorated plastered or un plastered surfaces of ceiling including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing on the same all complete as specified.

M&L for preparing old decorated plastered or un plastered surfaces of ceiling including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applying two coat of white washing on the same all complete as specified.

M&L for preparation old decorated wooden painted surfaces and applying one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified.

M&L for preparation old decorated wooden painted surfaces and applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified.

M&L for preparation of old painted surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel painting on steel surfaces complete all as specified.

M&L for preparation of old painted surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel painting on steel surfaces complete all as specified.

M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coats of exterior acrylic emulsion paint all as per manufacturer's specification and as specified.

M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying one coat of exterior acrylic emulsion paint all as per manufacturer's specification and as specified.

Taking down cement or cement lime plaster on stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for 15mm thick rendering in CM 1:4 on faces of stone brickwork or concrete surface walls finished even and smooth without using extra cement complete al as specified.

M&L for 15mm thick rendering in CM 1:6 on faces of stone brickwork or concrete surface walls finished even and smooth without using extra cement complete al as specified.

M&L for 5mm thick rendering in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement.

M&L for preparation of new decorative plastered surfaces of wall and applying two coat of exterior acrylic emulsion paint over a one coat of alkali resistant primer complete all as specified.

M&L for applying three coat of white washing including preparation of new or previously untreated ceiling surfaces complete all as specified..

M&L for preparation of new decorative plastered surfaces of wall and applying two coat of oil bound distempering (oil emulsion) over a one coat of primer complete all as specified.

Biswanath Sharma (BID ID -3474200)

M/s Sohini Construction (BID ID -3474693)