MAINT AND REPAIR/REPLACEMENT OF STREET LIGHTS WITH CONNECTED ITEMS AT TECHNICAL AREA AT AF STN BIDAR

Amount

Taking down street light/ flood light fittings for repair/ replacement of any capacity from 45-250 W and refixing the same after all repair work complete all as specified and as directed. Note: Spares shall be measured and paid separately.

Supply only LED driver of 40/45 W LED Street light/ Post top / flood light fitting.

Supply only LED driver of 70/72 W LED Street light/ flood light fitting.

Supply only LED driver of 90/100 W LED Street light/ flood light fitting.

Supply only LED driver of 120 W LED Flood light fitting.

Supply only LED driver of 150 W LED flood light fitting.

Supply only LED driver of 240 W LED flood light fitting.

Wiring with 3 core, 2.5 sqmm PVC insulated PVC sheathed multistranded flexible copper conductor cable drawn through existing conduit / pipe from junction box to fitting complete including taking down old unserviceable cable complete all as specified and as directed.

Junction box made from FRP sheet ready made of size 200x140x 95 mm having 100 A capacity including RYB and neutral with aluminum busbar with 4 way connector, MCB SP 6 Amp 10 kA 240 V - 01 No. fixed to pole / wall with MS clamp 25x5 mm duly painted with one coat of red oxide and two coats of synthetic enamel to MS clamp including taking down existing junction box complete all as specified and as directed.

S&F in replacement of MCB TPN 32 Amp 10 kA, 415 V, 50 Hz, AC complete all as specified and as directed.

S&F in replacement of MCB TPN 63 Amp 10 kA, 415 V, 50 Hz, AC complete all as specified and as directed.

Supply, fix, test and commissioning 45 Watt LED street light fittings, High efficiency IP 66 protection, powder coated pressure die cast aluminium housing and clear injection moulded polycarbonate / toughened glass have multi chip on board LED and metal clad PCB. The minimum lumen output of the system shall be greater than 7200 lumens with minimum lumens per watt 101±3% and must maintain 70% of lumens output at 50000 bhrs, asymmetric fixing to existing bracket including nut bolts of suitable size and electrically connected to the existing system including taking down existing fittings and fixtures complete all as specified and as directed.

Supply, fix, test and commissioning 70 Watt LED street light fittings, High Efficiency IP 66 protection, powder coated pressure die cast aluminium housing and clear injection moulded polycarbonate / toughened glass have multi chip on board LED and metal clad PCB. The minimum lumen output of the system shall be greater than 7200 lumens with minimum lumens per watt 101±3% and must maintain 70% of lumens output at 50000 bhrs, asymmetric fixing to existing bracket including nut bolts of suitable size and electrically connected to the existing system including taking down existing fittings and fixtures complete all as specified and as directed.

Supply, fix, test and commissioning 100 Watt LED flood light fittings, with High pressure die cast housing with lens IP 65 protection, powder coated CCT(k) 6000, asymmetric fixing to existing bracket including nut bolts of suitable size and electrically connected to the existing system including taking down existing fittings and fixtures complete all as specified and as directed.

S&F IP 65, 25W New generation, post top, energy saving, environmental friendly, long life, aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, No harmful and UV radiations, operating temp-10 deg C to -45 deg C, Voltage range -140 - 270V, Avg life - 50000bhrs, lumenefficiency>140lm/W, powered by integral isolated electronic driver, in ABS housing, with lower THD, Output short, open Circuit protection, over voltage protection, surge voltage protection including taking down existing fittings and fixtures complete all as specified and as directed.

S&F LED Bollard light IP 65, 16W acts as an imposing street furniture. The elegant yet minimalistic design acts a silent observer and giving light, diffuser at the upper portion adds function value into landscape environment No harmful and UV radiations, operating temp-10 deg C to -45 deg C, Voltage range -140 - 270 V, Avg life - 50000bhrs, lumenefficiency>130lm/W, powered by integral isolated electronic driver, in ABS housing, with lower THD, Output short, open Circuit protection, over voltage protection, surge voltage protection including taking down existing fittings and fixtures complete all as specified and as directed.

S&F LED Luminaire IP 65, 75W Aesthetically designed LED post top with aluminium enclosure, powered with high power LED as light source and die casted heat sink exhibits classic look with symmetrical light distribution and excellent heat dissipation for long life, power factor >0.95, luminaire lumen output - 6440lm, CCCV driver with voltage range 150-270V AC, temperature range -10 deg C to +50 deg C, CRI> 80, cass-1, SDCM<5, driver efficiency >85 %, THD<10%, colour temperature-6500K, short circuit and over circuit protection, surge protection -3KV in CM, safety extra low voltage safe level<60V Voltage range -140 - 270 V, Avg life - 50000hrs, lumenefficiency>140lm/W, powered by integral isolated electronic driver, in ABDC as per IS-10322/IEC-60598 standard IP 20 protected, 50000 burning hours with 70% of its initial lumen maintained luminaire efficiency>100lm/W fixed complete with all accessories and provision of PVC sheathed 3 crore 1.5 sqmm copper conductor for connection including taking down existing fittings and fixtures complete all as specified and as directed.

S&F LED 150 W high efficient flood light Luminaire, aluminium die cast housing parts for long life, pure polyster powder coated dark grey housing, high purity PMMA lenses for superior performance, toughened glass with silicon gaskets for IP 66 protection, driver cover designed to suitable to maintenance, power factor >0.95, luminaire lumen output - 6440lm, CCCV driver with voltage range 150-270V AC, temperature range 0 deg C to +50 deg C, CRI> 80, cass-1, SDCM<5, driver efficiency >85 %, THD<10%, colour temperature-6500K, short circuit and over circuit protection, surge protection -3KV in CM, safety extra low voltage safe level<60V Voltage range -140 - 270 V, Avg life - 50000bhrs, lumenefficiency>140lm/W, powered by integral isolated electronic driver, in ABDC as per IS-10322/IEC-60598 standard IP 20 protected, 50000 burning hours with 70% of its initial lumen maintained luminaire efficiency>100lm/W fixed complete with all accessories and provision of PVC sheathed 3 crore 1.5 sqmm copper conductor for connection including taking down existing fittings and fixtures complete all as specified and as directed.

S&F post top lantern fitting CFL 2x18 watts including CFL lamp and connecting with suitable size cable including including taking down existing fitting complete all as specified and as directed.

Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31, 9.0 meter long, single swan neck type, including preparation of surfaces, applying two coats of aluminium paint over one primer coat of red oxide zinc chrome primer and taking down existing pole complete all as specified and directed. The poles shall confirm to IS - 2713 complete all as specified and as directed. NOTE: Earth work and PCC foundation shall be measured and paid separately.

PCC 1:4:8, type D2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete for steel pole complete all as specified and as directed.

PCC 1:2:4, type B1 (using 20 mm graded granite stone aggregate) as in coping for steel pole including necessary formwork complete all as specified and as directed.

Mild steel cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of synthetic enamel paint including dismantling unserviceable / corroded Mild steel sections complete all as specified and as directed.

S&F in replacement of 3 pole power contactor ML 3 including necessary connections for incomming and outgoing complete all as specified and as directed. Make: L&T Cat No. SS90721 or equivalent in Philips / Legrand / C&S

S&F in replacement of Digital timer switch Astro suitable for switching on / off light and other electric devices according to the rising/setting of the sun with combination function for creating switching programs in which devices are switched according to astronomical time and/or fixed preset times and also suitable for daily astronomicaal calculation of the sunrise/ sunset time based on the entered locaton or location coordinates complete all as specified and as directed. Make: Legrand Cat No. 4126 54 AlphaRex3 D21 or equivalent in Philips / L&T / C&S

Painting to PCC pole with two coats of cement base paint of approved colour shade and writing Pole numbers with white paint having black background enamel paint suitable for outdoor, including cleaning of poles, removing creeper etc from pole complete all as specified and as directed.

Supply, laying, testing XLPE insulated screened, PVC inner sheathed galvanised steel strip or wire, armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm, 4 core including taking down existing cable complete all as specified and as directed.

Supply, laying, testing XLPE insulated screened, PVC innersheathed galvanised steel strip or wire, armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 4 core including taking down existing cable complete all as specified and as directed.

Supply, laying, testing XLPE insulated screened, PVC inner sheathed galvanised steel strip or wire, armoured, heavy duty LT UG electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 2 core including taking down existing cable complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

40mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 for protection of cable laid in trenches complete all as specified and as directed.

50mm bore GI tubing light grade including necessary fittings such as bend, tee, elbow etc complete in trenches/ on wall complete all as specified and as directed.

Taking down old unserviceable PCC LT cable covers complete all as specified and as directed.

Unreinforced pre cast concrete cable cover class LV type 3 flat size 250 x 150 x 40 mm for cable protection complete all as specified and as directed.

Supply and spreading fine natural river sand in trenches for cushioning of under ground cable complete all as specified and as directed. Note: Only punned thickness shall be measured and paid for the purpose of payment

Relaying old serviceable unreinforced pre cast concrete cable cover taken out from the trenches complete all as specified and as directed.

S&F in repairs MH Lamp 70 W complete all as specified and as directed.

S&F in repairs MH Lamp 150 W complete all as specified and as directed.

S&F in repairs MH Lamp 250 W complete all as specified and as directed.

S&F in repairs MH Lamp 400 W complete all as specified and as directed.

S&F in repairs fluorescent tube rods T-5 24 Watts, 230 volts complete all as specified and as directed.

S&F in repairs electronic ballast (choke) suitable for FTL T-5 24 Watts fitting complete all as specified and as directed.

S&F in repairs heavy duty copper ballast 400 watts,230 V single phase, suitable for SV /MH fittings as in post top lantern/ street lights/ flood light fittings complete all as specified and as directed.

S&F in repairs heavy duty copper ballast 250 watts, 230 V single phase suitable for SV/MH fittings as in post top lantern/ street lights/ flood light fittings complete all as specified and as directed.

S&F in repairs heavy duty copper ballast 150 watts 230 V single phase suitable for MH/ SV fittings as in post top lantern/street lights/flood light fittings complete all as specified and as directed.

S&F in repairs construction heavy duty copper ballast 70 watts,230 V single phase, suitable for SV/MH fittings as in post top lantern/street lights/flood light fittings complete all as specified and as directed.

S&F in repairs Vaccum pressure impregnated capacitor 10 MFD AC 250 volts complete all as specified and as directed.

S&F in repairs Vaccum pressure impregnated capacitor 15 MFD AC 250 volts complete all as specified and as directed.

S&F in repairs pressure impregnated capacitor 20 MFD AC 250 volts complete all as specified and as directed.

S&F in repairs lamp holder suitable for 70/150/ 250/ 400 W AC 230 V, Single phase complete all as specified and as directed.

S&F in repairs Non retrofit CFL lamp 18 watts 2/4 pin type 230 volts complete all as specified and as directed.

S&F in repairs Non retrofit CFL lamp 11 watts 2/4 pin type 230 volts complete all as specified and as directed.

S&F in repairs copper ballast / choke 1x18 watts, 230 volts suitable for CFL fitting complete all as specified and as directed. Make: CG Cat Pt No SFB7018 or its equivalent in Havells/Bajaj / Phillips

S&F in repairs copper ballast/choke 1x11 watts 230 volts suitable for CFL fitting complete all as specified and as directed. Make: CG Cat Pt No SFB7019/11 or its equivalent in Havells/ Bajaj / Phillips

Supply and fixing aviation obstruction light fitting with lamp and connecting with suitable size cable including taking down old unserviceable one complete all as specified and as directed.

Mr Madhusudhan Kotarki

AMAR CONSTRUCTION

M/s S.L.Chablani