Construction of ACR at Boys Primary School Hazerpora.

Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load.

Back Filling with II class sand / GSB/ Stone dust inside plinth incl. watering, ramming,rolling etc. incl. all carriages complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns etc for mass concrete.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported kail Wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter Nuts and bolts.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain indow sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with :1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing and fixing of High rib colour coated sheets roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick

Providing and Fixing of ridges hips / valleys ornamental of colour G.I sheets of width 60 cm overall width including cost screws/washers all complete job. with polymer coated J or L hooks, bots and nuts 8mm dia G.I limpet 50 mm thick.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing fixing of 35mm thick panelled galzed shutters for doors, windows including cost of MS butt hinges and decorated teak panelling all complete. Imported kail wood

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing of hardware items of good quality including cost of screws all complete job

Handles 150 mm

Handles100mm

T bolt 100mm

T bolt 150mm

Concealed locks 200 mm

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood

Providing and fixing of 10mm thick Plywood in ceiling of good quality incl. cost of coenice,nails etc all carraiges complete job.

Extra for providing heavy duty glass panes 3.5 mm thick instead of ordinary glass panes 13.75 kg/sqm in doors windows and clererstoy windows shutters (Area of opening for glass panes excluding portion inside shall be measured

Providing and electric fitting as per details one lighting point includes lamp point with wiring in 1.5 sq mm pvc insulated copper wire and 2.5mm pvc multistrand copper wire, 6 amp on way switch in PVC conduits/ channel with bends junctions boxes etc 6 amp S pole MCB 10 amp with switches all complete job.

One heating point includes 03 pin heating socket with wiring in 2.5 sq.mm pvc insulated copper wire and 4.00 sq.mm pve multistrand copper wire, 16 amp on way switch in PVC conduits/ channels with bends junctions boxes etc 6 amp S pole MCB 10amp with switches all complete job

One fan point includes on fan with wiring in 2.5 sq.mm pvc insulated copper wire and 4.00 sq.mm pvc multistrand copper wire, 1200 mm ceiling fan with dimmer in PVC conduits / channels with bends junctions boxes etc 6 amp S pole MCB 10 amp with switches all complete job.

Carriage of material by M T from source to site complete job.

Sand Av. Lead 30 Kms

Course Aggregates Av. Lead 10 Kms

Bricks av. Lead 25 kms