Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC VILLAGE TATKI P O BODLA DISTRICT KURUKSHETRA PIN CODE 136131 HR | KURUKSHETRA | HARYANA | 136131 | ₹30.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹34.6 L+₹4.1 L (13.5%)Rejected-AOC | ₹34.6 L+₹4.1 L (13.5%) | L2 | Rejected-AOC L2 |
| 3 | L3₹35.0 L+₹4.5 L (14.7%)Rejected-AOC 122 SAMHARIYA ASOPUR TANDA AMBEDKAR NAGAR UTTAR PRADESH 224190 | AMBEDKAR NAGAR | UTTAR PRADESH | 224190 | ₹35.0 L+₹4.5 L (14.7%) | L3 | Rejected-AOC L3 |
| 4 | L4₹35.4 L+₹4.9 L (16.1%)Rejected-AOC | ₹35.4 L+₹4.9 L (16.1%) | L4 | Rejected-AOC L4 |
Tender Value
Refer Docs
EMD Value
₹65,200
Closing Date
25 Mar 2026, 1:00 pmClosed
NEERAJ KAALIA
Administrative Building, DCRTPP Yamuna Nagar
Providing G.S. Sheet Shed for Covering D.V. Stations at DCRTPP, HPGCL, Yamuna Nagar.
2026_HBC_505960_1
2026716C77D9 2B87 4DD5 880F CAB29A11C7A8711PGC
Open Tender
Civil Works
Works
180 days
DCRTPP
3 documents required · 3 mandatory
₹1,180
₹65,200
Yes
23 Jun 2026
2 Mar 2026
27 Mar 2026
2 Mar 2026
25 Mar 2026
2 Mar 2026
[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand).
[11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete.
[11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand).
[11.71.1]Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work.
[11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
[13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
[4.1]Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil.
[4.6]Extra for levelling and neatly dressing of disposed soil completely as directed by Engineer-in-charge.
[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
[6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).
[7.20.1]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand).
[7.22.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 1. Cement mortar 1:4 (1 cement : 4 coarse sand).
[9.22.3]Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 3. 0.63 mm thick with zinc coating not less than 275 gm/ m².
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
BOQ_584691.xls
BOQ • 0.26 MB
505960Corigendum4.pdf
PDF • 0.08 MB
505960Corigendum3.pdf
PDF • 0.08 MB
505960Corigendum2.pdf
PDF • 0.08 MB
Corigendum1.pdf
PDF • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .