SPECIAL REPAIR OF TOILETS BATHROOMS KITCHEN INCL ROOF TREATMENT AT BLDG NO P 427 AT MIL STN GANDHINAGAR

Amount

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

M&L for colour Ceramic tiles 7 to 8 mm thick size of each tile of size 600mm X 100/150mm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles any coloured / shed of size 300mm x 600mm x 6 to 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4), complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. and Laid bedded and pointed in any mortar complete all as specified and directed

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over & including 15mm thick screed bed 1:6 cement and sand mortar complete all as specified& directed by Engr-in-Charge.

M&L kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over rendering back of tile 10 mm CM 1:4 complete all as specified& directed by Engr-in-Charge.

M&L machine cut kota stone slab flooring 18-20mm thick and area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge.

M&L for rounding to edges of stone/granite slabs one edge such as in steps cooking platform , window cill and other situations complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

Material and labour colour Ceramic tiles 7 to 8 mm thick area of each tile of size 600mm X 600mm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for colour Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size 300mm X 300mm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub base complete all as specified& directed by Engr-in-Charge.

M&L rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over 15mm thick cement screed bed in cm 1:6 with grey cement and pigments in floors complete all as specified and directed by Engr-in-Charge

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified.

Taking down chowkhats with shutter (without taking off shutters from the frames) chowkatts n exc 1.5 sqm each complete all as specified & directed by Engr-in-Charge.

Taking down chowkatt with shutter (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified & directed by Engr-in-Charge.

Taking down shutter of any decription exc.1Sqm and n.Exc 2 Sqm complete all as specified & directed by Engr-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for three/two tracks shutters/ frames/grill for doors, windows, ventilators and partitions (Fixed portions), slinding windows, incl rollers, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply only 4 mm thick glass sheet any shade tint glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

Supply only 3mm thick glass sheet froasted glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC 1:2:4 type B-0 to match the existing floors/walls.

M&L for clamps , hold fasts; wall ties, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® as directed by Engr-in-Charge.

S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified and directed.

S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

Dismantling timber scantlings unframed 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed.

Excavating in post holes in soft/ loose soils(or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.

M&L for Stairs (framed) including stringers , treads, landing , balusters, hand rails etc , cooler stand including cleats brackets, etc complete with gusset plate , rails braces etc. complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified and directed.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces on walls, finished even and smooth without using extra cement in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 12mm thick in CM 1:4 on stone wall surfaces fair faces of brick work & finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed.

Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and preparation for next treatment complete all as specified.

M&L for 1mm thick wall care putty on walls surface incl prepare to surface for next treatment complete all as specified and directed.

M&L for prepration of old surfaces of ceilling and applying two coat of white wash complete all as specified and directed.

Material and labour for existing prepared surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.

Material and Labour for applying Two coats of 100% Premium exterior acrylic emulsion paint (Any shade) on new/old wall surfaces latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as spcified and directed.

M&L for two coats of destemper with acrylic distemper of required shade and colour as per manufactgurer's specification on existing prepared wall/ceilings surfaces complete all as specified and directed.

M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.

Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F for CPVC PIPE OUTER DIA 20MM Brass Elbow (3/4 X ½) complete all as specified and directed

Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

Taking up or down 25mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

S&F 25mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

M& L for Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I includng dismantling of of old tank complete all as specified & directed by Engr-in-Charge.

S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engr-in-Charge

S&F in repair for 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair for 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar upto 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed.

S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F, 110mm bore PVC vent cowl complete all as specified and directed.

M&L, in repair, PVC (SWR) Gully trap 125/100mm ssetting and jointing with cement mortar (1:1) complete all as specified and directed.

S&F, in repair, PVC (SWR) floor trap, with SS grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge.

S&F in repair15mm bore fancy type long body bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge.

S&F in repair 15mm bore angle valves/stop valve ,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified & directed by Engr-in-Charge.

S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.

S&F in repair fancy type Pillar tap,swan neck cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified

S&F in repair tubular towel rail, stainless steel, 20mm dia, ‘D’ type, 60cm long between flanges fixed to wall complete all as specified and directed.

S&F in repair kitchen sink without draining board bowl size 18"x16"x8" inch of made out of stainless steel heavy duty with plugs, washers and waste pipe including waste coupling and waste pipe complete all as specified & directed by Engr-in-Charge.

M&L for formwork to soffits of suspended slabs such as wash hand basin ,roof slabs, floor slabs, landings and similar work, not exc 200mm thick (horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete nominal mix 1:2:4 , using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like complete all as specified and directed. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

M&L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

M&L for 10 mm thick rendering in CM 1:4 as in roof over green concrete surface finished even and smooth using Lequid WPC complete all as specified. Note :-Lequid WPC will be measured and paid seperately)

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M&L for roof treatment using APP based polymeric membrane minimum weighing not less than 3.6kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on top of treated surface of roof complete all as specified and directed.

S&F, in repair, wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including 125mm x125mm over head shower and suitable screwed for iron/upvc pipes of 15mm bore GI pipe all as specified complete all as specified & directed.

S&F, in repair, sink cock faucet wall mounted chromium plated and suitable screwed for iron/upvc pipes of 15mm bore GI pipe all as specified complete all as specified & directed.

S&F, in repair, vitreous china wash basin, white, flat back of size 450mm x300mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.

S&F, in repair, stainless steel Kitchen plate rack of overall minimum size 750mm x 750mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 4.00 Kg.

S&F in repair 19/20mm thickness factory made PVC solid board both side prelaminated approved texture as in kitchen cabinet/cupboard ( with shelves and partions) including frame , beading and necessary fittings & fixture like hinges, handle, magnet catch, lock etc as per manufacturers instructions and quality and make , made from rigid foam sheets having density 600 Kg/Cum and laminated sheet /PVC foil lamination . the exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter/frame shall be fire retardent having necessary scrwed holding capacity etc complete all as specified and as directed. Note : Hinges, handle, magnet catch, lock etc measured and paid supply only seperately in respective items

Supply only butt hinge power coated W hinge 75mm long and 2.1/2.5mm thick to pressed to cupboard/cabinet all as specified.

Supply only fancy type stainless steel handle of size 125mm long suiatable for cupboard/cabinet all as specified.

Supply only FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for Wadrobe, Cupboard and Almirah Door. (SS MAT) with Mounting Screw complete all as specified

Supply only stainless steel curvo Wardrobe/cupboard Lock 25mm thick complete all as specified and directed.

S&F in repair stainless steel curtain rod of 25 mm dia (in lengths as directed) heavy duty with decorative ball type side brackets supporting hook etc , both ends and pair with PVC rawl plug & steel screws on walls/beam complete all as specified and directed.

S&F in repair for PVC corner shelves set of 3 and size ( 7 inch , 9 inch, 11 inch ) complete all as specified and directed

M&L for water proofing of sunken portion consisting under mentioned items :- (i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed.

Resecuring or easing & adusting without taking down of shutters exc 1.0sqm and n.exc 2.0 Sqm and adjusting with out taking down complete all as specified and directed.

S&F 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

Dismantling of cement concrete (un-reinforced) kerb stone and the like of any description of and in any position not otherwise specially provided for complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high.

S & F in repair Soap dish, stainless steel, standard size 160x160x90mm Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Demolition of reinforced cement concrete to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) work by means of sharp chisel, low impact hamer without damaging existing strong concrete incl disposal of broken material/malba to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge. Notes :- (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

Demolition/Removal of existing RCC water tank including cover (Capacity not exc. 1000 Ltr) placed on roof of the Bldgs/Quarters including removal of their staging/platform complete all as directed. Note : (i) Tank/staging shall be taken down after demolition in small pieces. (ii) Demolition shall be carried out carefully without damaging roof

Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC Conduit concealed wiring and including medium grade PVC Conduit 25mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including modular sunken box/ Galvanized box with 4,6,8,12 & 16 nos modular plate for fixing for modular switches, sockets and fan regulators etc. complete all as specified and directed for the following :-

(a) One light/fan/Exhaust fan point controlled by one switch

(b) One light point controlled by two way switch

(c) One bell buzzer point controlled by one push button independent.

All as per item no 124 above but with 2.5 sqmm for one multi purpose socket 5 Amps 3 Pin, Independent board.

All as per item no 124 above but with 2.5 sqmm One multi purpose socket 5 Amps 3 pin socket, on the same board complete all as specified and directed.

All as per item no 124 above but with 2.5 sqmm One multi purpose socket 5 Amps socket 3 pin outlet indpendent but below the switch board of light points in the same vertical planes with cables complete all as specified and directed.

M&L for wiring with and including multi stranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken for boxes, its accessories & including with multi stranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision of sunken concealed terminal boxes complete all as specified and directed.

S & F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed. Make :- Indoasian(Shynora) or equivalent in Havells/Legrand

S & F Socket outlet flush modular (piano) type 3 pin 6 Amps with suitable plate and cover complete all as specified and directed.

Supply and fixing modular 16 Amps socket 2/3 pincomplete all as specified and as directed by Engr-in-Charge.

S & F Switch Modular (piano) flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed.

S&F in switch modular piano, flush button single pole, two way 5 Amps complete all as specified and directed.

S&F in modular bell push,flush type, 5 amps complete all as specified and directed. Make :- Indoasian(Shynora) or equivalent in Havells/Legrand

S&F in repair Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed

M & L for modular ceiling fan regulators, Electronic step type type, AC, 230 Volts complete all as specified and directed.

S&F in repair lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

S &F fix in repair Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

S & F in repair MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve,10KA , fixed in sheet metal board complete including connecting.

S & F in MCB’s SPN 40 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S&F, in repairs, LED light fitting, 1x20W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F in repair LED light decorative ultra slim round profile LED lighting with extured polycarbonate enviromental friendly energy effecient ready to use pack 2 feet, 9 watt watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix LED light fitting 1 x 10 W bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

M & L in replacement sub-main wiring with 3 single core 6 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in PVC conduit ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 6.0 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

Taking down existing Geyser and keeping in safe custudy and re- installation the same after completion of work completed all as per specified and directed. Cost of renstallation of geysers included in quoted rate. Any cost of reinstallation of geyser not to be given.

Taking down existing Ceiling fan and keeping in safe custudy and re- installation the same after completion of work completed all as per specified and directed.Cost of renstallation of geysers included in quoted rate. Any cost of reinstallation of geyser not to be given.

Taking down existing Electric meter and keeping in safe custudy and re- installation the same after completion of work completed all as per specified and directed. Cost of renstallation of geysers included in quoted rate. Any cost of reinstallation of geyser not to be given.

M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4mm dia wire by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

Supply, installation, commissoning and testing, factory made CPRI approved, LT Metal Box size 120cmx 90cm x 40cm, wall mounted board made out of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof with front opening hinged door and locking arrangement mounted on MS flat iron (40x6 mm and 6" long) 04 No clamp welded to 40mm x 40mm x 5mm size angle iron frame alround panel body duly grouted on wall, 415 volts 3 phase, 4 wire AC 50 HZ having aluminium bus bar insulated with PVC sleeves, space for fixing single phase KWH electric meter of suitable capacity 04 Nos, copper lugs, spacers, mounting channels, rubber gasket, locking knobs, hylam sheet pieces, PVC shrinkable sleeves, nuts and bolts, washers etc and suitable size single core copper wire connections, suitable compartments and epoxy powder spray paint with primer complete all as specified including the following accessories including taking down old unserviceable distribution board, taking down and refixing serviceable electric KWH meter in new panel (all as per sample) complete comprising the followings :- (a) Incoming supply:- (i) MCCB, 415 Volts, 4 Pole, 25 KA breaking capacity of 63 Amps - 01 No. (ii) R-Y-B phase, LED indicating lamp - 03 Nos (iii) 200 Amp TPN main aluminium bus bar (b) Outgoing supply:- (i) MCB, SPN, 40 Amp, 10 KA = 04 Nos (ii) Space for mounting single phase energy meter - 04 Nos (iii) Copper cable 6 Sqmm wire and open terminals for all feeders.

Supply & Fix LED 30 Watt (5700K) Bldg Security light fitting, and including with GI light grade Pipe 32 mm dia bracket with connected with 3 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site all as specified and directed. Make : Wipro/Philips/CG

M&L for bell electric, Dingdong type A.C. 230 Volts, single pole complete all as specified and Directed

Aggarwal Brothers and company (BID ID -3481613)

AJAY CONSTRUCTION COMPANY (BID ID -3481716)