Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC VILLAGE MANDRI P O CHALAHAL SUB TEHSIL DHAMI DISTT SHIMLA SHIMLA HIMACHAL PRADESH | L1 | Accepted-AOC Accepted | |
| 2 | L2₹5.4 L+₹35,687.67 (7.15%)Rejected-Finance NOT SPECIFIED | L2 | Rejected-Finance Rejected | |
| 3 | L3₹5.4 L+₹36,485.32 (7.31%)Rejected-Finance VILLAGE AMARU PO SAI TEH BADDI DISTT SOLAN H P | BADDI | SOLAN | HIMACHAL PRADESH | L3 | Rejected-Finance Rejected | |
| 4 | L4₹5.6 L+₹63,836.10 (12.8%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹5.7 L+₹66,818.54 (13.4%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹5.4 L
EMD Value
₹10,750
Closing Date
20 Mar 2023, 10:30 amClosed
Executive Engineer
HP City Transport and Bus Stand Management And Development Authority Tutikandi Shimla -4
SH Conversion of rooms to Shops
2023_BSMDA_70299_1
HPBSMDA/EE/(2)/2021 Tenders Vol-III
Open Tender
Civil Works
Item Rate
60 days
Karsog
Please refer Tender Document
9 documents required · 9 mandatory
₹350
HP BSMDA Tutikandi Shimla-4
₹10,750
20 Apr 2023
6 Mar 2023
20 Mar 2023
7 Mar 2023
20 Mar 2023
7 Mar 2023
Amount
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within upto all lead :- Of area beyond 3 sq. metres (Three square meter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. (Dismantled material to be handed over to the Deptt.)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all lead as per direction of Engineer - in- charge, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.(Dismantled material to be handed over to the Deptt.)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge, In cement mortar, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. (Serviceable materiled to be haned over to the Deptt.)
Repairs to plaster of thickness 12 mm (Twelve milimeter) to 20 mm (Twenty milimeter) in patches of area 2.5 sq.meters (Two point five square meter) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge, With cement mortar 1:4 (One cement isto four fine sand), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:- 15622, of approved make, in all colours and shades, laid on 20mm (Twenty milimeter) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600X600mm, (Six hundred into Six hundred milimeter)( Kajaria, Nitco, Somany,Orient, RAK, Johnson & Johnson make) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve milimeter) thick bed of cement mortar 1:3 (One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete, Size of Tile 600x600 mm (Six hundred into Six hundred milimeter) ( Kajaria, Nitco, Somany,Orient, RAK, Johnson & Johnson make) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters, 80x1.20 mm (Eighty into one point twenty milimeter) M.S. laths with 1.20 mm (One point twenty milimeter) thick top cover, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and fixing ball bearing for rolling shutters, , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, Two coats, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and applying white cement based putty of average thickness 1 mm, (One milimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Jitender Kumar
Rajinder Singh
KISHOR KUMAR GOVT CONT
DALIP SINGH GOVT CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .