Repair to Record Room for Tahasil Office building at Satyabadi (Sub Registrar Office) in the District of Puri for the year 2025-26.

Supplying, fitting and fixing of dressed seasoned non-sal wood work framed and fixed (wrought & putup) in trusses, purlins, frames, rafters, doors, windows, ventilators and beams including cost, conveyance, taxes with all labour, T&P required for the work etc. complete as per direction of the Engineer-in-Charge.

Supplying, fitting and fixing of 32 mm thick flush door shutter with approved quality of 30 mm thick BWR block board pasted with 1 mm thick sunmica on both sides of approved design and quality including cost of all door fittings and fixtures etc. complete.

Removing old lime or cement plaster from wall surface including racking out joints 12mm deep and removing the debrise away from the work site within 50m lead including all labour T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

12mm thick cement plaster (1:6) finished smooth to brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.

Providing, fitting and fixing of window(sliding type) made up aluminium section no.9778 as windows frame,section no 4095,4096 and 9777 ,3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber beading including locking arrangenent including all fitting including cost of materials all taxes labour t & p excluding cost of glass etc complete.

Distempering One coats to walls with distemper of approved shade on old work or new work to give an even shade including scaffolding staging charges with cost conveyance, taxes of all materials, labour with T&P required for the work etc. complete as per specification and dirction of the Engineer-in-charge.

Ground Floor

First Floor

Finishing walls with two coats of Weather coat paint of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.

Ground Floor

First Floor

Painting two coats with any approved enamel paint to wood/ iron work over a coat of primer including cost of the paint, primer, sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-Charge.

Supplying fitting and fixing fully vetrified tiles in floors of size 600mmx600mm of approved make 20mm thick cement mortar (1:4) and filling joints with white cement of appoved quality including cost, conveyance, royalities, taxes of all materials, labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Filling in foundation and plinth with sand well watered and rammed including cost, conveyance, royalty, taxes of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge.

P.C.C. M-15 grade using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer laying in layers and compacting by vibrator & all leads and lifts including frame works etc. including hoisting loweing and laying concree ramming in layers not exceeding 0.15m thick watering curing including cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete including dewatering if required as per specification and direction of the Engineer-in-Charge.

Providing cement concrete (1:2:4) with 12mm size of c.b.h.g chips of approved quality from approved quarry for cement concrete road including hoisting, lowering and laying in position in layers not exceeding 150mm thick over polythene sheet with proper packing and ramming by means of vibrator to proper slope and level including curing with cost conveyance, royality and taxes of all materials, labour with T&P required for the work etc. complete as per specification direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information