Supply and Installation of 3 Nos of 9 Mtr Mini High Mast Light with 180W x 5 Nos LED Flood Lights (project No.496/21) in Tanur Municipality, Malappuram District.

Amount

Supply installation testing and commissioning of Mini High Mast using Octagonal Pole made single/two sections of hot dip galvanised GI sheet suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system and including round arm galvanized luminary carriage suitable to install 5/6 nos luminaries in symmetrical arrangement control gear box and lighting spikes foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 9 Meters

Supply installation testing and commissioning of Panel board, 2 core 10 sq mm Power cable, 25A 2 Pole AC 1 rated power Contactor, 24 hour Timer, 32A 2-way neutral links, 5-32 A MCB, 40 A RCCB, HRC Fuse 20/32A, 40A isolator, multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables - 3 core 1.50 sq mm, Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long (but without charcoal/ coke and salt ) as required, 25 x 3 mm GI strip, bare earthing conductors 3.15 mm copper conductor ( 10 SWG), copper earth socket 3.15 mm (10 SWG), double wall corrugated (DWC) pipe,brass compression gland and aluminium lugs 2 X 10 sq. mm (19mm) and all accessories.

Supply Conveyance, installation, testing and commissioning of 180W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) (Make: Bajaj/Havells/Crompton/HPL/Philips/Equivalent)

Foundation including earthwork excavation as per drawing and should be done by as per direction of engineer in charge.

Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc.

Charges for KSEB connection including all laison works (Actual amount paid on purchase of receipt).

RAFEEQUE V.P.

J N LIGHTINGS (KERALA)