REFURBISHMENT OF ROOM NOS 104 AT 1st FLOOR AND 202 AT 2nd FLOOR OF SATCOM BUILDING AT DEAL DEHRADUN PROJECT NO. TD/21-22/CAB-30.01 (DEAL-122) (SPECIAL WORK) UNDER GE (I) RND DEHRADUN

Amount

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

M&L for PVC SHEET WALL PANELLING (colour and shade as approved by GE) of thickness 5mm solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement with and including Dismantling wooden boardings 10mm to 25mm thickness in lining of walls and partitions, excluding supporting members but including and removing demloition meterial to a outside MD land complete all as specified and directed. complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site) complete all as specified and directed.

Making the opening in brick masonry built in cement mortar for doors/windows/clerestory window including dismantling in floor or walls by cutting masonry and making good in cm 1:4 the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground complete all as specified and directed.

M&L for plain cement concrete(1:2:4) type B-1using 20 mm graded crushed stone aggregate as , in lintels upto 1.5m clear span,cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed and the like with and incudingDemolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) and removing demloition meterial to a outside MD land complete all as specified an directed. Note:-Reinforcement shall be measured and paid for separately in respective items

M & L for Virified Ceramic tiles 10 mm thick dark shade double charged/ ultracharged (square/ rectangular) polished area of each tiles exceeding 0..36 sqm but not exceeding1.00 sqm, in floors etc. set and jointed in neat in cement slurry @3.3kg /sqm and pointed inwhite or colour cement to match with shade over and including 20 mm thick screed bed in CM 1:4 with and includinng Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing demloition meterial to a outside MD land complete all as specified an directed.

M&L for Virified Ceramic tiles 10 mm thick dark shade double charged/ ultracharged (square/ rectangular) polished as on vertical surfaces such as skirting / dado over and including 10mm thick rendering in cement mortar 1:3 rough finish to receive the tiles set and jointed in neat in cement slurry @3.3kg /sqm and pointed inwhite or colour cement to match with shade with and includinng dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and removing demloition meterial to a outside MD land complete all as specified an directed.

Providing and fixing two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (Area of window upto 1.75 sqm)

S & F M.S Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

Providing and fixing powder coated aluminium (minium thickness of powder coating 50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, complete all as specified and directed. (Glazing, paneling and dash fasteners to be paid for separately).

S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

Providing and fixing 12 mm thick prelaminated particle board with decorative laminatiion on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete all as specified and directed as per architectural drawings and directions of engineer-in-charge.

Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and complete all as specified and directed. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 (with stainless steel cover plate minium 1.25mm thickness), having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc complete all as specified and directed.

S&F PVC coloured vertical blind / roller blind hanging on powder coated hanging arrangement including roller and all necessry fixing and fetures as per manufacture instruction. or directed by GE/Engr-in-Charge complete all as specified and directed.

S&Fbrass body mortice lock, vertical type of size 100 mm with brass body 2 lever complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall/ ceiling, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of oil bound distemper complete all as specified and directed.

Supply and fixing in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 110 mm with PVC clamps and saddles complete all as specified and directed.

Supply and fixing G.I. Pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall with and includinng Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified and directed.

Supply and fixing G.I. Pipes 20 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall with and includinng Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and directed.

Supply and fixing in repair white wash basin 630 x 450mm with and inluding C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and directed.

Supply and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. complete all as specified and directed.

Supply and fixing in repair PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. complete all as specified and directed.

S&F in repair 100 mm sand cast Iron grating for gully trap complete all as specified and directed.

S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed.

Supply and fixing in repair CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of GE.

75mm Thick partition Supply and fixing, 75 mm thick full height partition frame work made out of aluminum section thickness of 1.2 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate sections (minimum 40 mm x 30 mm) The frame structure covering and Top trim / side trim made out of Aluminum with powder coating (50 microns). The skinning / panels / tiles to be of 9mm thick MDF Board 2400mm height and 1030mm width each (as per approved design and drawing). Cost to include that for provision of fixing switches & the necessary cut out for the same and incl. dismantling of old one complete all as specified and directed & as shown on drawing with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / aluminum race ways 2 nos / wire management cleats / runners etc. Make: Delite, Durain, Godrej

Ditto all as per item ser No. (29) above but of size 1050 x 2400mm.

Ditto all as per item ser No. (29) above but of size 760 x 2400mm.

Ditto all as per item ser No. (29) above but of size 845 x 2400mm.

60mm Thick partition Supply and fixing, 60 mm thick partition frame work made out of aluminum section thickness of 1.2 mm powder coated 50 microns frame work designed to carry out electrical power & computer wiring in 2 different race ways with a separation of at least 300mm between them including necessary slots. The frame work consists of minimum two vertical upright a top horizontal section, bottom section and intermediate sections (minimum 40 mm x 30 mm) The frame structure covering and Top trim / side trim made out of Aluminum with powder coating (50 microns). The skinning / panels / tiles to be of 9mm thick MDF Board 1800mm height and 750mm width each (as per approved design and drawing). Cost to include that for provision of fixing switches & the necessary cut out for the same and incl. dismantling of old one complete all as specified and directed & as shown on drawing with all standard fittings & fixtures, leveling screws etc. Cost to include the supporting system to partitions & walls such as brackets / fasteners / joining posts / aluminum race ways 2 nos / wire management cleats / runners etc. Make: Delite, Durain, Godrej

Ditto all as per item ser No. (33) above but of size 900 x 1800mm.

Ditto all as per item ser No. (33) above but of size 450 x 1800mm.

Ditto all as per item ser No. (33) above but of size 650 x 1800mm.

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawal plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLS-IS 694 cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch.

All as per Srl item No 38 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 38 above for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per item No 38 above for one power point 3 pin 15 Amps socket outlet PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed.

All as per item No 38 above for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete all as specified and directed. Note for item 38 to 42 here in before : (i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars/floors etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings shall be in surface conduit of suitable size fixed on surface with using PVC rawl plugs . (ii) Rate for modular metal flush boxes ,inner and outer plate with frames are deemed to be included in the quoted rate by contractor for above items. (iii) Fittings like Modular switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iv) The size of conduits shall be determined on permissible No. of runs of wires as specified in SSR Part-I (2009) clause 19.125 (B). However minimum size of conduit shall be 20mm dia (Medium grade)

S&F Modular switch piano single pole one way 6 amp complete all as specified and directed.

S&F Modular switch piano single pole one way 16 amp complete all as specified and directed.

S&F Modular socket outlet 2/3 pin combined 2 module 6/16 amp complete all as specified and directed.

S&F Modular socket outlet 2/3 pin combined 2 module 6 amp complete.

S&F Modular TV Co -axial socket with metal flush box and white Plate of 1 module complete all as specified and directed .

S &F Modular telephone socket Outlet 1 module complte all as specified and directed complete all as specified and directed

S& F Modular Lan RJ 45 UTP Cat socket Outlet 1 module including plate and frame, metal flush box complete all as specified and directed

S&F 1 or 2 module GI box along with modular base and cover plate for TV / telephone Socket complete all as specified and directed

S&F ceiling rose 3 plates polycarbonate, isolated body complete all as specified and directed.

S&F modular fan step regulator 120 W 2 module complete all as specified and directed.

S&F in replacement of UNSV fluorescent tube light with Surface and wall mounted LED Batten 20 W with aluminium housing and integrated electronic driver ,1000 lumens 6500K IP 20 protection and all accessories pre- wired including connecting to mains complete all as directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in replacement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole and neutral MCB 20 amp,240 Volts power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16/20 amp as required complete all as specified and directed.

M&L in replacement UNSV of sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 25 mm dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed.

M&L in replacement UNSV of sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 20 mm dia with standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 2.50 Sqmm as earth continuity conductor complete all as specified and directed.

M&L in replacement UNSV of sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 10 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit (Medium grade) of suitable dia not less than 32 mm dia with standard accessories along-with two run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor wall/ ceiling/concealed surface etc complete all as specified and directed. Notes for item No. 56 to 58: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement sand mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling/RCC surfaces shall be in surface conduit of suitable size fixed on ceiling/RCC surfaces with using PVC rawl plugs)

S&F in replecement of UNSV vertical type load line distribution board ,double door, 8 way, AC 3 Phase 415 volt with TPN bus bar 250 Amps for each phase with 2 Neutral bar, 2 Earthbar and cable ties for cable management,fully insulted busbar & shrouded Neural bars ,improved Pan assembly for each insullation ,prefitted masking sheeet,reversible door for IP 43-"IK 09 with metal door Suitable for provision for MCCB up to 125 A as incomer and SP/TP MCB's as out going complete all as specified and directed.

S&F in replacement of UNSV MCB distribution board Double door, SPN, 240 volts, 12 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK-09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- Note: (i) MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’.

All as per item No 60 above but SPN, 240 volts, 8 ways.

All as per item No 60 above but SPN, 240 volts, 4 ways. Note for Item No.60 to 62 (i) Fittings like MCB’s /Isolators etc. shall be measured and paid for separately under appropriate item of Sch ‘A’. (ii) -Sheet steel enclosure to be fixed flush to wall by cutting niche & make good to the disturbed wall surface as per existing (iii) Rate for Incomer MCCB is deemed to be included under above item.

All as per item No 62 above but, MCCB 4 pole ,100 Amps 36 KA complete all as specified and directed.

S & F in replacement of unserviceable MCB SPN 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 6 to 32 amps complete all as specified and directed.

S & F in replacement of unserviceable DP Isolator 240 volts 'C' Curve suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed.

S & F in replacement of unserviceable MCB SP 240 volts 'C' Curve suitable for fixing in DB of capacity 6 to 32 Amps complete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed. NOTE : RCC pit cover shall be pre-cast of RCC (1:2;4) type B-1 80 mm thick reinforced with XPM weighting not less than 4 Kgs/Sqm in lieu of CI cover.

Material and labour in replacement of UNSV GI strip of size 32mm x 6mm for laying along the wall/roof on batten or burried in ground or drawn in conduit pipe or fixed to poles or any other situation as directed or as required GI strip of size 32mm x 6mm earth continuity conductor complete with all accessories such as porcelain insulators, saddles and fixing screw etc for conductor complete all as specified and directed.

All as per item No.68 here in above but using 4 mm dia galvanised iron or steel wire complete all as specified and directed.

Taking down ceiling fan by disconnecting the electric connection and dismantling the blades and removing from ceiling or wall of bldg by descrewing the nut bolt and complete all as specified and directed.

Rehanging and refixing ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50Sqmm from ceiling rose or connector block of fan including minor repairs such as replacement of locking pin, reel insulators, bolts, nuts etc and spraying one coat of synthetic enamel paint of color approved by GE/ Engr in charge complete all as specified and directed.

Supply and fixing of GI pipe Meduim grade of size 50 mm bore laying in trenches/floors or walls including all fittings complete for protection of copper/aluminium/GI strip, as required and directed by Engineer-in-Charge complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes etc. all as specified and directed by Engineer-in-Charge including removing cable protection covers/ bricks & stacking serviceable bricks for reuse and disposal of unserviceable covers within 50 m complete all as specified and directed. Note : (i) Excavation shall be made carefully in order to avoid damage of existing cables and brick protection. (ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations

M&L for Returning, filling in including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cables etc. are laid, jointed and tested complete all as specified and directed by Engineer-in-Charge.

M&L for Removal of surplus excavated soils not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material & labour for sand filling with clean dry find sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.

Supplying and installing perforated painted with coating M.S, cable tray of size 100 mm width x 50 mm depth x1.6 mm thick with perforation not more than 17.5 %, in convenlent sections joined with connectors, suspended from the ceiling with M.S suspenders incl bolt & nuts, painting suspenders etc complete all as specified and directed.

S&F 20 mm dia meduim class PVC conduit along with accessories in surface / Recess incl cutting the wall/ floor and making good the same complete all as specified and directed .

JS CONSTRUCTION COMPANY (BID ID -3096675)

M/S WASEEM KHAN CONTRACTOR (BID ID -3108398)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3095268)