COMPREHENSIVE MAINT TO CERTAIN BUILDING OFFRS AND JCOS AND REPAIR MAINT TO JOINEARY WORK AND CERTAIN B AND R REPAIR WORK IN MD ACCN AND OTM ACCN POCKET 9 UNDER B R III UNDER GE ROORKEE

Amount

M & L for rendering 12 mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plaster and Preparation of new plaster surfaces of wall and applying 1mm thick wall putty and two coat of oil bond distemper complete all as specified and as directed.

M & L for rendering 12mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plaster and preparation of new plaster surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including taking down old cement plaster and preparation of new plaster surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces and finished even and smooth without using extra cement including taking down old cement plaster and preparation of new plaster surfaces of ceiling and applying three coats white wash complete all as specified and as directed.

M & L for complete removal of old existing treatment on walls, cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds, moss and efflorescence salt and trading oil decorated surface of walls and applying a coat of wall care putty of approved make as on wall surface and two coats of oil based distemper (white or tinted) complete all as specified and as directed.

M & L for Preparation of old surfaces of wall by Washing, rubbing down and stopping of distempered and apply one coat of oil bond distemper on wall complete to match the existing surface of wall complete all as specified and as directed.

S& F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 15 mm dia including taking up or down old steel tubing complete all as specified and as directed.

S& F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia including taking up or down old steel tubing complete all as specified and as directed.

M&L for white color rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and as directed.

M&L for white color rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 1000 ltrs including GI tank nipple of size 20/15 mm dia including dismantling of old water tank complete all as specified and as directed.

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and as directed. (Make : Prayag , Essco)

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified. (Make : Jaquar Cat No. QQT-7037)

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Prayag , Essco).

S & F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make : Jaquar Cat No. QQT-7169B.

S&F in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and as directed. (Make : Prayag ,Essco )

S&F in repairs chromium plated cast copper alloy 2-way angle cock with flange suitable for 15mm bore pipe, complete all as specified. (Make : Jaquar cat No.QQT 7041 )

S&F in repairs chromium plated cast copper alloy 1-way angle cock with flange suitable for 15mm bore pipe, complete all as specified and as directed. (Make : Prayag, essco )

S&F in repairs chromium plated cast copper alloy angle cock with flange suitable for 15mm bore pipe, complete all as specified. (Make : Jaquar cat No.QQT 7053 )

S & F in repair wall mixer with 'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Prayag, Essco )

S & F in repair wall mixer with 'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Jaquar cat No.QQT - 7219 )

S & F in repair wall mixer Telephonic with crutch (Provision for hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Jaquar cat No.QQT 7267 ) with expended shower pipe 16mm size 1375x375mm with wall brakets cat No. SHA 1211 & shower rose 150x150 cat No. OHS - CHR 1605

S&F in repairs hand shower with 1.2 Mtr flexible tube and hooks complete suitable for 15mm bore pipe complete all as specified and as directed. (Make : Prayag cat No. BH-79S)

S&F in repairs CP brass shower rose 150mm size shower with 300mm arm suitable for 15mm bore pipe complete all as specified and as directed. (Make : Prayag cat No. BS-79S)

S&F in repairs health faucet with (1.5 Mtr tube & hooks ) complete all as specified and as directed. (Make : Prayag Cat No.455)

S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified and as directed. (Make : Prayag Cat No.522)

S&F Cabinet Mirror (400mm x 500mm) complete all as specified and as directed. (Make : Prayag Cat No.554)

S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and as directed.

S&F in repairs 10 ltrs PVC (White) valve less symphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminum brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed. (Make- 1st Quality of Parryware, Hindware, Cera, Prayag).

S&F in repairs vitreous china wash down water closet pan wall hung (WC with cistern in one piece) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed. (Make- 1st Quality of Parryware, Hindware, Cera, Prayag).

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed. (Make- 1st Quality of Parryware, Hindware, Cera, Prayag).

S&F in repairs, Vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with integral footrest with 'P' or 'S' trap complete all as specified and as directed. (excluding flushing cistern and flush). (Make- 1st Quality of Parryware, Hindware, Cera, Prayag).

S&F in repairs, Vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed. (Make- 1st Quality of Parryware, Hindware, Cera, Prayag).

S&F wall mounted 10mm thick looking mirror 600x900mm Item No.139754894 make jaquar complete all as specified and directed.

Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane with and incl putty/beading complete all as specified and as directed.

All as per item No 35.00 above but 3mm thick pin headed glass complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staple etc complete all as specified.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed.

Taking down chowkhat with shutter exe 1.50 Sqm and n exe 4 Sqm( without taking off shutter) each complete all as specified and directed.

Taking down chowkat with shutter n.exe 1.50 sqm (without taking off shutters) each complete all as specified and directed.

Taking down shutters n.exe 1 Sqm each any description complete all as specified and directed.

Taking down exe 1 Sqm but n exc 2 Sqm each of any description shutters complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F Factory made 35 mm thick 2nd H.W plain framed paneled shutters (two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Factoty Made 2nd Class H.W Glazed and Skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chamfered or rounded mitred and rebated sash bars any member as in windows ventilator stiles and rails as specified in SSR Part I section 8 clause 8.24 (b) complete all as specified and directed.

S&F Factory made 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauge,etc sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 (a) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

M&L framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0 complete all as specified and directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200 cucm each complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.(Make:-Rajshri,Sintex)

S&F Factory made solid panel PVC door shutter o 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at side as per specification and drawing complete all as specified and as directed by Engr -in- charge.( Make: Rajshri, Sintex)

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed blocks for hold fast including necessary formwork complete all as specified and directed.

S & F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction of particle board core commercial type on both sides complete all as specified and directed.

S&F 20mm thick soft wood clean sawn boarding with butt joints, chamfered one side fixed in repairs to replace and or decayed boarding to patches including cutting out old, piecing, heading joins etc in cupboard shelve complete all as specified and directed.

S&F haps and staple, 75 mm long aluminum anodized, wire type including bolt to hing plate and fixed with screw complete all as specified and directed.

S&F 40mm dia cupboard knobs, fixed with nuts screw and washer mild steel bright finished complete all as specified and directed.

S & F butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type 100mm size C-22 complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 100mm size complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 75mm size complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 50mm size complete all as specified and directed.

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F in mild steel pressed handles, 150mm long, oval type, stove enameled black complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F mild steel sliding door bolts 300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

M&L preparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating with creosote oil ends of posts, back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each complete all as specified and directed.

Ditto all as per item No. 70.00 above but treating small articles such as holdfasts, end of posts, backs of chowkhats, etc area n. exc. 0.1 sq m each, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

S&F 3mm thick sheet glass pin headed type and glazing with oil putty in square n.exc. 0.5 sqm each pane complete all as specified and directed.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S&F 150 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,. or galvanised wire staples complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floors and pavings 40 mm thick finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

Supply only glass dividing strips 3 mm th and 38 mm wide inserted in position confirm to design complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floors, plinth protection and pavings 50 mm thick finishing cement concrete surface even and smooth using extra cement including construction joint 10 mm width and 50 mm depth complete all as specified and directed.

M&L for light colour (Digital colour) Vitrified Ceramic tiles 10 mm hick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M&L for Coloured (Digital colour) Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm and not exc 0.18 sqm, in floors etc. over and including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M&L for Coloured (Digital colour) Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. over and including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M & L for 350x 250x 7 mm/ 450X 350X 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc. over and including 10mm thick rendering in CM 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M & L for 300 x 200 x 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc. over and including 10mm thick rendering in CM 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismantling of old tiles complete all as specified and directed

M&L for Kota stone slab 20-25 mm thick in skirting, etc over and including 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed.

M&L for coloured chequered cement tiles 25cm x 25cm x 25mm thick over and including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set with grey cement and pigment, jointed and pointed in neat cement slurry in floor including dismantling of old tiles complete all as specified and directed .

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling courseat roof padding (avg thickness 40mm) complete all as specified and directed.

M&L for Taking down existing roof treatment from roof and cleaning with wire brush to remove all loose particles and washing with water including removing the debris up to 100M distance including picking, sweeping clean and washing down with water to remove dust & plastering in CM 1:3 , 15 mm average thickness over the roof surface using water proofing compound (including WPC @ 3% by weight of cement) as per manufacturer direction including finished even and fair without extra cement , complete all as specified and described as under :- (a) Preparation of surface and applying one coat of polymeric primer @ 0.30 kg/Sqm. (b) Supply & providing APP based polymeric water proofing membrane 3 mm thick of weight not lwss than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed . (c) Applying one coat of polymeric modified bitumen 85/25 @ 1.2 kg /sqm over with one coat of aluminium bituminous paint @ 0.20 kg/sqm shall be applied. NOTE :- The work of water proofing treatment shall be got executed through expert team of manufactures' or authorised applicator of manufacturer complete all as specified and directed by Engr - in - charge.

M&L for fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. frame and GI wire mesh complete all as specified and directed.

M&L for Plaster of paris Molding size 130x130mm at the cornices of wall and ceilling, design of moulding as directed by Engr in charge and complete all as specifed and directed.

S&F anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Anodised aluminium grill or guard bars fixed to aluminium window, weight not less than 2.82 kg/Sqm complete all as specified incl powder coating with powder coated colour as approved by GE complete all as specified and directed.

S&F 4mm aluminium composit panael fixed to aluminium frame including necessary beading, complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete with oil putty complete all as specified and as directed.

S&F Door closer hydraulically aluminum (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

VERDHMAN ASSOCIATES

M/S. DEV ASSPOCIATES

shreyansh construction

M/S IRFAN AHMAD CONTRACTOR

RAM PRAKASH AND ASSOCIATES

BAL KRISHAN MALHOTRA