Spl repair to bldg Nos P-51, 52, 53 at Bihuguri and Spl repair of external finishes, seepage and leakage of bldg P-213 of 404 Lt AD Regt at Misa Camp and under GE (S) Tezpur

Amount

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.Copmlete all as specified and as directed.

S&F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge, anodised with hard drawn steel spring all as specified and directed

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters.Copmlete all as specified and as directed.

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing).Copmlete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed.

M&L for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M & L Brick work built in CM 1:4 with sub class "B"old size bricks straight or curved on plan exceeding 6 m mean radius at height of more than more than 9 mtr (rates are including scafolding) complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as directed

M&L reinforced cement concrete Type B1 (1:2:4) (20mm graded aggregate) in slab supported on walls, beams, and columns, in floors, roof, landings balconies, canopies, eck slab and in shelves and the like all a specified and diredted

Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) Copmlete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.Copmlete all as specified and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Copmlete all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.Copmlete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.Copmlete all as specified and as directed.

S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550 Mpa as in roof covering etc fixed with self tapping screws.Copmlete all as specified and as directed.

All as per item ser No 16 above but plain sheet for ridge ,gutter,Eaves board etc fixed with self tapping screws as specified.

M&L 2nd class HW in scantling fixed clean swan in framed work.Copmlete including dismantling all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing .Copmlete all as specified and as directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing .Copmlete all as specified and as directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:3) complete all as specified and directed.

M&L 18 -20 mm thick Granite stone (of any type) work (table rubbed and polished) in cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) for in skirting/border with 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel truss any type of tress.complete all as specified and as directed.

Dismantling Structural steel work includings door, gates, etc and similar works.complete all as specified and as directed.

S&F steel work in tubular truss of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240.complete all as specified and as directed.

Refixing only steel truss,rafter and purline of different size bend to shape, cut to length etc, including necessary welding,special shape washer.complete all as specified and as directed.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.

M&L in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

S&F in repairs 15 mm dia stop valve/angle valve fancy type chromium plated with screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F in repairs PTMT Swivel shower dia with shower Arm 15 mm dia 195 mm with bend of 45 degree with flange any colour for fixing mm pipe.complete all as specified and as directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Pillar taps, 15 mm bore fancy type ,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.complete all as specified and as directed.

M&L for laying 15 mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors including taking up or down complete all as specified and directed

M&L for laying 20 mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down.complete all as specified and as directed.

S&F composite 100% solid wood plastic complete (Single extended process) material with density not less than 780kg/cum & plastic wood as in chowkhat complete as per manufacturer's instruction.

S&F 30 mm thick 2nd class hard wood factory made flush shutter solid core construction with block board core and plywood face panels commercial type of both side.complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood Glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars) edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Pt I clasue 8.24 (a).complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including locking arrangment etc.complete all as specified and as directed.

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles n.exe 200 cu.cm each.complete all as specified and as directed.

S&F 100mm Butt hinges medium weight cold rolled mild steel

S&F 50 mm Butt hinges medium weight cold rolled mild steel

S&F MS 200 mm ordinary door spring including roller and roller plate

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy fixed with screws.complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.complete all as specified and as directed.

S& F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares.complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.complete all as specified and as directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water.complete all as specified and as directed.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement.complete all as specified and as directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement.complete all as specified and as directed.

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

M&L Applying two coats of Oil bound distember to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distember to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L complete removal of existing treatment and appplying one coats of weather coat(Apex of Asian or equivalent in dulux, Berger) over a thin layer of putty and one primer coats of damp shealth to old plastered walls as per manufacturer instrcution including properly fillings the cracks and apllied by approved applicator complete all as specified and directed.

M&L preparation of newely plaseter sufaces and appplying one coats of weather coat (Apex of Asian or equivalent in dulux, Berger) over a thin layer of putty and one primer coats of damp shealth to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr & filled with bituminous filler complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification.complete all as specified and as directed.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame.complete all as specified and as directed.

M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base.complete all as specified and as directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls/floor 110mm bore.complete all as specified and as directed.

All as per Item No 72 but 75mm bore

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.

S&F PVC (SWR) bends any radius 110 mm bore.

S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

S/F 110mm bore P.V.C vent cowl

M&L for chequered cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping and like including watehreing, slightly rounded or hamfered angles and throating as directed including formwork.complete all as specified and as directed.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.complete all as specified and as directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wooden surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.complete all as specified and as directed.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot.complete all as specified and as directed.

Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement.complete all as specified and as directed.

M&L Prelaminated particle board 12 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.complete all as specified and as directed.

S&F 12 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, length exc 5 cm but n exc 10 cm.complete all as specified and as directed.

Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed.

Taking down existing damaged IWC/EWC alongwith complete PCC and line concrete from sunken floor and providing new IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive. (iii) Fixing of 25mm dia GI pipe (med gde) spout of length 45 cm. (iv) Supply & fixing of vitreous china squatting pan, "ORISSA" pattern or padestal type, size 580x440mm white with integral footrest, P/S trap etc complete including providing PCC lean concrete in Mix 1:5:10 complete all as specified and as directed.

M&L for taking down of existing Roof treatment from roof and fence and covering surface of old concrete roof by picking , sweeping clena and washing down with water remove dust, etc and applying roof treatement with the following specifications: (a) Rendering 15mm th in cm (1:4) fixed with water proofing compound as per manufacturers instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plaster surfaces for 7 days by ponding water over the roof (leveling coure) (b) Applying evenly one coat of cold bituminous primer conforming to IS- 3384-1088@ 0.30 litre per sqm on th cleaned plastered surfaces (c) Applying layer of APP based polymeric membrane 3mm th (minimum) weighing 3.50 kg per sqm (reinforced with polyster non woven fabric weighing not less than 160 gms per sqm by torch application . The overlap shall not less than 100mm on the reverse direction and 75mm longitudinal direction and sealing overlaps. (e) Applying evenly one coat of aluminium paint of 0.10 ltr sqm over APP based polymeric membrane.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as ceiling fittings, bulk head fittings, tube light fittings etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse).complete all as specified and as directed.

M & L for point wiring for one light /fan/Bell point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through rigid non metallic concealed conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover.complete all as specified and as directed.

All as per Ser item No.6 above but for 5 amps socket on same board with other switches

All as per Ser item No.6 above but for 5 amps socket on independent board.

All as per Ser item No.6 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Material and labour for replacement of switch 5 amps switch flush type one way single pole.

Supply and fix for replacement of switch socket combination outlet flush type, 5 Pin, 5 amps.

Supply and fix for replacement of Socket outlet 2 in 1, 5 Pin, 5/6 Amps

Supply and fix replacement of switch socket combination outlet universal type 5 pin 5/16 amps

Supply and fix replacement of ceiling rose surface backelite 65x50 mm having 3 terminals.

S & F replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. all as specified and directed

Supply and fix replacement of Circuit/Sub Main Wiring with 2x4.0 Sqmm PVC insulated, FRLS, copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC Casing capping with all fittings and accessories including PVC box (IS-14772) and 2.5 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly.complete all as specified and as directed.

S&F replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.complete all as specified and as directed.

S&F for replacement of LED 20 W B22 CDL 3 STAR LED LAMP Colour Temperature 6500K.complete all as specified and as directed.

Supply & fix for replacement of Basic all purpose surface and wall mounted LED batten 20 Watt with polycarbonate housing & integrated electronic driver. Make: Havells/Phillips/Surya/CG or equivalent make

S & F for replacement of MCB DB Single pole and neutral 8 way double door with 200 amps rated bus bar complete concealed in wall all as directed.

Supply and fixing for replacement of 240V, 10KA, 'C' curve miniature circuit breaker (MCB) of following Single Pole and Neutral and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning as specified and directed. Make: Havells/Legrand/L&T/C&S/Standard

Supply and fixing for replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 40 Amps, in the MCB DB Complete with connection testing and commissioning. Make: Make: Havells/Legrand/L&T/C&S/Standard

Supply and fixing for replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amps, in the MCB DB Complete with connection testing and commissioning. Make: Make: Havells/Legrand/L&T/C&S/Standard

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).Make-Havells/CG/Usha

Supply and fix Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers.Make-Havells/CG/Usha

Supply and fix Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers.Make-Havells/CG/Usha

Supply and fixing for replacement of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including GI Pipe 40 mm dia bracket 1.2 mtr in length bent to shape of 120 degree with MS flat bracket 2 Nos, washers, nuts, bolts etc. Make: Surya/ Havells/ Bajaj/ Wipro/ Simoco/ Phillips/ Crompton or equivalent

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed.

Material and labour for replacement of Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation andf earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I.complete all as specified and as directed.

Supply and fixing Tubes, 'light grade' 50 mm dia bore galvanised, with all fittings, welding, fixed in walls both side of pipe and drilling for hanging of Ceiling fan on GI pipe including making good to disturbed surfaces of walls/floors complete all as directed

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor of 2 core x 16 Sq mm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed.

S&F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos900 bends. M.S.hook and stay or guy.complete all as specified and as directed.

Supply fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I

S&F in repair 2000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position

Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms)

Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed.

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and as directed.

Supply and fix Stop valves 15 mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.complete all as specified and as directed.

Supply and fix Bib taps 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed

Supply and fix Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 2 1 0 g m s)

S & F GI pipe 15 mm bore fixing on wall with clamp and all acessories for water heater complete all as directed. Note.1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

M/S Bharat Construction Co.

Anil Kumar Sarmah

M/S Deep-Jeet

D G Corporation

M/S MOHANPASARI