COMPREHENSIVE MAINTENANCE OF EXISTING INTERNAL ELECTRIFICATION INCLUDING FITTINGS AND FIXTURES SUB MAIN WIRING DBs AND ALLIED WORKS AT CERTAIN OFFICERS JCO ORs MARRIED ACCN ATSTAFF ROAD PATTERSON SQUARE MANEKSHA ENCLAVE AND JADUNATH LINES UNDER GE S

Amount

Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specified and directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint over a coat of red oxide primer internally and externally including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point controlled by one switch complete all as specified and as directed. NOTES : - 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 2.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 2.00 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

All as per srl item No 2.00 above but point wiring for stair case one light point controlled by two way switches complete all as specified and directed.

Description all as per serial item No. 2.00 here in before but for one bell point controlled by one bell push complete all as specified and directed.

All as per srl item No 2.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Material and labour for point wiring in existing conduit using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH PVC insulated and unsheathed stranded cable drawn through existing non metallic/mettalic any type concealed/Surface conduit and including replacement of its fittings any type if required as per site requirement etc., PVC junction boxes ISI marked with GI sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint over a coat of red oxide primer internally and externally including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point controlled by one switch complete all as specified and as directed. NOTES : - 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 8.00 here in before but for socket out let point 5 Amps on same board complete all as specified and directed.

Description all as per item No 8.00 here in before but for socket out let point 5 Amps on independent board complete all as specified and directed.

All as per srl item No 8.00 above but point wiring for stair case one light point controlled by two way switches complete all as specified and directed.

Description all as per serial item No. 8.00 here in before but for one bell point controlled by one bell push complete all as specified and directed.

All as per srl item No 8.00 above but point wiring for onesocket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.

Supply and fix in repair modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair modular switches, one way, 20 Amps, one module, 230 volt , AC supply, complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair modular socket outlet 16 amps,2/3 pin , combined 2 module, complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair fan regulator / Dimmer step type one module / 2 module, 120w 230 Volts, 50 Hz, AC complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair modular switches, two way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. MAKE : -Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Supply and fix in repair modular blanking plate 1 module complete all as specified and directed. MAKE : - Anchor (Roma) / Indo Asian (ELVIRA) / Havells / Standard or equivalent as specified in list of makes.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25 mm dia with FRLSH )accessories, concealed on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. NOTES : - Switch, socket and fan regulators to be measured and paid for separately.

Description all as per item No 22.00 here in before but for socket out let point 5 Amps on same board,complete all as specified and directed.

Description all as per item No 22.00 here in before but for socket out let point 5 Amps on independent board,complete all as specified and directed.

All as per srl item No 22.00 above but point wiring for stair case one light point controlled by two way switches complete all as specified and directed.

Description all as per serial item No. 22.00 here in before but for one bell point controlled by one bell push complete all as specified and directed.

Description all as per item No 22.00 above but with 2.5 Sqmm cable for 3pin 15 Amps switch socket outlet (Power Point),complete all as specified and directed.

Supply and fix in repair switch piano 5 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supplying & fixing in repair switch, single pole two way 6 Amps, 230 volts AC circuit complete all as specified and directed. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair switch piano 15 Amps flush type one way 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair bell push 5 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair socket outlet 3 pin 6 amps, 230 volt. flush type, ISI Marked, complete all as speciied and directed. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair socket outlet 2 in 1, 6 pin 5 /16 Amp and multi pin flush type, complete all as specified. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair fan regulator/ Dimmer electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and directed. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified. MAKE : - SSK / Havells / Indo Asian or equivalent as specified in list of makes.

Supply and fix in repair channel for fixing of LED tube rod, aluminium housing body in CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. ( Tube rod shall be measured and paid for separately ). MAKE : - Havells Cat Part No REGAL BATTEN 8UPTO1x18W DSBSWH / Surya / Halonix or equivalent as specified in list of makes.

Supply and fix in repair 18 W Polycarbonate LED tube light, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. Note: - Tube rod must be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact for fixing in existing LED fittings . MAKE : - Havells Cat Part No TITANIANEO1213T8DSTL18W LED865 SPC / Surya / Halonix or equivalent as specified in list of makes.

Supply and fix in repair decorative surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 9 watt LED tube high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. MAKE : - Havells Cat Part No LUMILINPBUSSBS10WLED865SPCSC / Surya / Halonix or equivalent as specified in list of makes.

Supply and fix in repair bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. MAKE : - Havells Cat Part No RUGBYNEONFT10WLED760SSYMBOPC or equivalent as specified in list of makes.

Supply and fix in repair in replacement bracket for security light made up of 25mm dia,0.9 m long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Supply and fix in repair LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W each and having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed. MAKE : - Havells Cat Part No ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or equivalent as specified in list of makes.

Supply and fix in repair post top lantern LED 35W , cast aluminium spigot 76mm dia with and including fixing arrangement IP 65 , with high effieient LED light, with poly carbonate diffuser, complete with high efficient LED lamp 30 W and accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down existing light fitting and removal complete all as specified and directed. MAKE : - Havells Cat Part No. RUBYPT35WLED757PSYMTOPC or equivalent as specified in list of makes.

Supply and fix in repair surface mounting type LED round/ square type wall bracket light ceiling light aesthetically designed with and including high efficiency LED lamp 12W Pin type / threaded type with B22 base / E27 base E14 base made up of polycarbonate with high efficiency LED 15W capacity & clear diffuser Oval/ round / square type with IP 20 Protection including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down old existing wall fitting of any description and in any position complete all as specified and directed. MAKE : - Surya Cat part no SLEWL12W-GP200 / HAVELLS Cat Part No LHFOAICITZIC015/HALONIX HHN04808CFRF-02 or equivalent as specified in list of makes.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circular / flat of size 10 Sqmm including all incoming and outgoing connection with proper size of thimble complete all as directed and specified.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium, stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 core including old unservicable cable complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium, stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 4 core including old unservicable cable complete all as specified and directed.

Servicing/overhauling/ cleaning of any sweep and testing after maint of existing ceiling/exhaust fan including making functional to all unserviceable ceiling/exhaust fan including repairing in position for replacement of unserviceable condencer, regulator, connecting wire and oiling if required all as directed. NOTE : - Items such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly under respective items of BOQ.

Supply only fan condencer, 2.5 Mfd, 240 volts for ceiling/Exhaust fan complete all as specified and directed.

Supply only fan condencer, 4 Mfd, 240 volts for ceiling/Exhaust fan complete all as specified and directed.

Supply only copper conductor FRLSH cable, 1.5 Sqmm, 3 core, 1100 Volt grade complete all as specified and directed.

Supply only ball bearing No 6201 suitable for ceiling/ exhaust fans complete all as specified and directed.

Supply only ball bearing No 6202 suitable for ceiling/ exhaust fans complete all as specified and directed.

Supply only ball bearing No 6203 suitable for ceiling/ exhaust fans complete all as specified and directed.

Supply and Fix in repair for hanging assembly set comprising with down rods rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins suitable for any type of fans complete all as specified and as directed.

Taking down ceiling fan/ Exhaust fan of any size/ sweep after disconnecting the wire from existing ceiling rose for repair/ replacing the unsv bearing, gun metal bush or for rewinding and refixing the same after rewinding, cleaning dust, oiling greasing, servicing, and rubber reel with clamp and nut-bolts, washers, lock pin etc as existing including connecting flexible 3 core cable from ceiling rose to connector etc complete all as directed spcified by Engineer-in-charge. (NOTE : - Bearing, gun metal bush etc shall be measured and paid separately under respective item of BOQ and rewinding item paid seperately under relevant item of BOQ)

M & L for rewinding of ceiling fan of any size with super enamelled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 1200 mm sweep/ 1400 mm sweep complete all as specified and directed

M & L for rewinding of exhaust fan/ wall mounted fan of any size with super enamelled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 350 to 450 mm sweep complete all as specified and as directed.

M & L for rewinding of exhaust fan of any size with super enamelled copper wire of existing gauge including varnishing and drying complete reassembling & testing complete of size 230 to 300 mm sweep complete all as specified and as directed. NOTE for item No 58 to 61 : - (i) Items required to be replace such as bearing, bush , capacitor etc will be measured and paid separately as supply only item. (ii) Fans to be rewinded will be handed over to contractor at MES store yard after cutting the burnt winding in presence of Engr-in-charge and cost of cutting of winding shall be included in the quoted rate. (iii) The cost of shifting the fan from MES store yard to contractors workshop and back shall be included in the item. (iv) Fans will be issued to the contractor in lots of 10 Nos and more for which, contractor shall ensure that minimum lot of 10 number each be returned to the department on every fifth day from the issue of fans after carried out rewinding and other repair, in failing so, the amount @ Rs. 20/- per fan per day shall be deducted from the contractor due till the returning of fan duly tested.

Supply and fixing in repair PVC fan blade including fixing mountings and accessories of exhaust fan of 230mm sweep/300mm sweep complete all as specified and directed.

Supply and fix in repair metal fan blade including fixing mountings and accessories of exhaust fan of 230mm sweep/300mm sweep complete all as specified and directed.

Supply and fix in repair Fan motor with copper windings suitable for exhaust fan of 230mm to 300mm sweep metal body or PVC body 230V 1 ph 50Hz including fixing mountings and accessaries complete all as specified and directed.

S & F in repairs plastic body exhaust fan, AC singal phase, 240 volts of size 230 mm sweep with heavy duty, plastic body with louvers connecting up including provision of fixing clamp, nut bolts and cable from ceiling rose or connector to fan,including taking down old unserviceable pastic body exhaust fan complete all as specified and directed.

M&L for painting of ceiling fan / Exhaust fan using synthetic enamel paint in two coat over one coat of primer of any make/sweep/model etc after cleaning/washing and fill up cavities using filler including writing MES NO Black Colour complete all as specified and directed. NOTE : Colour of Paint shall be approved by GE

M&L for preventive maintenance of storage type electric water heater (Geyser) incl making functional of unserviceable geyser of any capacity comprising of the following work at different locations under AOR of GE (South) Ambala of any make, complete all as specified and as directed. (a) Inspection of geyser after opening bottom cover plate. (b) Examine any water leakage from geyser/storage tank. (c) Carry out operation of all stop cocks, pressure reducing valves, etc. to ensure free movement of the working parts. (d) Replace washers and glands to ensure smooth functioning. (e) Inspect vent pipes and remove blockage obstruction if any. (f) Check and correct earth continuity of electrical items. (g) Check and correct temperature setting of thermostats. (h) Items reqd for replacement will measured under respective item of BOQ. (j) Job card/ complaint slip issued by complaint cell / JE /Engineer-in-Charge shall be deposited by contractor or his repersentative on daily basis after attending the complaint including mentioning the items replaced duly signed by the user on complaint slip. If the job cards not deposited within 48 hrs duly completed, the penalty @ Rs. 50/- per day will be charged till the deposition of job cards and amount shall be deducted from the contractor dues.

Taking down old unserviceable geyser of cap 25 ltrs including all necessary electrical/water connection and keeping in safe custody for reuse/ repairs /servicing/overhauling etc and checking serviceability of parts, necessary cleaning, fixing removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the geyser, making necessary adjustment and proper fixing the repaired geyser in position, connecting to existing electric sources and testing at site complete all as specified and directed. NOTE : - (i) Re-fixing after repair i.e. cleaning externally and internally complete deemed to be included in above quoted rate. (ii) Job cards will be deposited duly completed within 72 hrs as directed by Engineer-in-Charge, the penalty @ Rs. 50/- per day will be charged till the deposition of job cards and amount shall be deducted from the contractor dues. 3. Items as required for replacement shall be measured under respective item of BOQ.

Taking down old unserviceable geyser of cap 50 ltrs including all necessary electrical/water connection and keeping in safe custody for reuse/ repairs /servicing/overhauling etc and checking serviceability of parts, necessary cleaning, fixing removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the geyser, making necessary adjustment and proper fixing the repaired geyser in position, connecting to existing electric sources and testing at site complete all as specified and directed. NOTE : - (i) Re-fixing after repair i.e. cleaning externally and internally complete deemed to be included in above quoted rate. (ii) Job cards will be deposited duly completed within 72 hrs as directed by Engineer-in-Charge, the penalty @ Rs. 50/- per day will be charged till the deposition of job cards and amount shall be deducted from the contractor dues. (iii) Items as required for replacement shall be measured under respective item of BOQ.

Material and labour for preparation of old painted surface of geyser of 25 ltrs capacity and spray painting with one coat of white Duco paint, writing MES No with black colour permanent marker complete all as specified and directed.

Material and labour for preparation of old painted surface of geyser of 50 ltrs capacity and spray painting with one coat of white Duco paint, writing MES No with black colour permanent marker complete all as specified and directed.

Supply only copper cable PVC insulated and PVC sheathed flexible size 4 Sqmm 3 core complete all as specified and directed. (Cable shall be in suitable length as per site requirement).

Supply only heating element of capacity 2 KW of geysers of any make ISI marked complete all as specified and directed. MAKE : - Racold/Ditz/Airex or equivalent as specified in list of makes.

Supply only heating element of capacity 1.5 KW of geyser of approved make ISI marked complete all as specified and directed. MAKE:- Recold / Ditz / Airex or equivalent as specified in list of makes.

Supply only apparatus plate assembly with rubber gasket including nuts, bolts, washers for geysers of 50/35/25 ltrs capacity complete all as specified and directed.

Supply only thermostat ISI marked suitable for the Geysers 25 ltrs capacity, 20 Amps, 240 Volts AC, adjustable type, 210 mm long or nearest size as per sample complete all as specified and directed.

Supply only thermostat ISI marked suitable for the Geysers 50 ltrs capacity,20 Amps, 240 Volts AC, fixed type,300 mm long or nearest size, Set at 90+/-6 degreeC as per sample complete all as specified and directed.

Supply only PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 60cm long for cold / hot water as per requirement complete all as specified and directed.

Supply only Non-return valve 15mm / 20mm dia of brass ISI marked as per requirement complete all as specified and directed.

Supply only Indicators of Geysers of any capacity/type as per requirement complete all as specified and directed.

Supply only 3 pin plug top, 16 amp capacity, 240 VAC, heavy duty, ISI marked complete all as specified and directed.

Supply only Geyser storage inner tank made out copper sheet suitable for 25 ltrs capacity complete all as specified and directed.

Supply only geyser storage inner tank made out copper sheet suitable for 50 ltrs capacity complete all as specified and directed.

Supply only safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/capacity complete all as specified and directed.

Supply and fix in repair sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 32 Amps, 'C' curve, 240 volts complete all as specified and directed.

Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor cable 6 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - Two run of 6.0 sqmm and one run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit. MAKE FOR WIRE : - Havells/Poly Cab/Plaza/Anchor or equivalent as specified in list of makes.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - Two run of 4.0 sqmm and 1 run of 4 sqmm cable with concealed conduct shall be measured as 1 unit. MAKE FOR WIRE : - Havells/Poly Cab/Plaza/Anchor or equivalent as specified in list of makes.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE: - Three run of 2.5 sqmm cable with concealed conduct shall be measured as 1 unit. MAKE FOR WIRE : - Havells/Poly Cab/Plaza/Anchor or equivalent as specified in list of makes

Taking down old unserviceable MCB DBs any type including MCB SP/SPN and removing unserviceable materials incl debris from site and keeping unserviceable DB/MCCB/MCB in safe custody for taking credit complete all as specified and directed.

Supply and fix in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 42 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole,125 AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed. MAKE: - Legrand/Schnider/Indoasian Cat Part No 811888 or equivalent as specified in list of makes.

Supply and fix in repair sheet metal enclosures distribution board for TPN, (MCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 43 protection, with shrouded neutral bar and insulated bus bar and earth link, suitable for MCB 4 pole as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed. MAKE: - Indoasian Cat Part No 811841 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply , installation, testing of SPN distibution board 12 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed. MAKE : - Indoasian Cat Part No 811808 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply , installation, testing of SPN distibution board 8 way,double door , IP 43 , as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed. MAKE: - Indoasian Cat Part No 811807 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply , installation, testing of SPN distibution board 4 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed. MAKE : - Indoasian Cat Part No 811805 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply and fix in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, ISI marked complete all as specified and directed. MAKE : - INDOASIAN Cat Part No 811008 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply and fix in repair MCB single pole and neutral 240 volts, 16 to 32 Amps,10KA, 50 Hz, 'B' Series complete all as specified and as directed. MAKE : - INDOASIAN Cat Part No 811034 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply and fix in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, 'B' Series complete all as specified and as directed. MAKE : - INDOASIAN Cat Part No 811056 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply and fix in repair MCCB four pole, 240 volts, 50Hz , breaking capacity 25KA, 125 Amps, Class-II, all as specified and and as directed. MAKE : - Indoasian Cat Part No. 830053 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply and fix in repair MCB four pole, 240 volts, 50Hz , breaking capacity 10KA, 100 Amps, complete all as specified and directed. MAKE : - Indoasian Cat Part No 811244 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Supply and fix in repair MCB four pole, 240 volts, 50Hz , breaking capacity 10KA, 40A to 63 Amps, C curve, complete all as specified and directed. MAKE : - Indoasian Cat Part No 811242 / Havells / HPL / Standard Electricls or equivalent as specified in list of makes.

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Material and labour for preparation of old treated surfaces (Plastered or un-plastered) on wall surface and applying two coat of white wash including finishing, complete all as specified and as directed.

Material and labour for preparation new plastered surface of walls and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Supply and fix in repair recess mounting type round / square down lighter6W adjustable high efficiency LED with extruded aluminum housing with clear diffuser and separate driver adjusable with high efficiency COB LED & clear diffuser with IP 20 Protection including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down old existing down lighter fitting of any description and in any position complete all as specified and directed. MAKE : - Havells Cat Part No SPARKLEPROADJDLR8W857MOD40DWHTNEEM LED or equivalent as specified in list of makes.

Disconnecting and taking old existing bollard light fitting of any description and in any position and supply and fix LED bollard light fittings surface mounting LED round/squar /cone aesthetically designed with MS bollard of 1.0 M ht, 9 W adjustable with high efficiency low glare diffuser with pressure die casted housing with eficient high output LED IP 65 Protection including base frame made up of sheet metal and connecting up with three core 1.5 Sqmm flexible copper conductor cable complete all as specified and directed. MAKE : - HAVELLS cat no CONENXBLS8WLED857PSYMTOPCM (1.0M)//HALONIX HLOB-05-10CW or equivalent as specified in list of makes.

Supply and fixing in replacement for GI protection pipe of 40mm dia light grade for cable protection including all fittings laid in trenches or fixed on pole, including making good the disturbed surface complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes etc not exceeding 10 Square metre on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

Material and labour for unwashed dry sand cushioning for cable protection ,filling in trenches/ducts, complete all as specified and as directed.

Material and labour for old size bricks sub class 'B' for cable protection laid along length of cable complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in pole foundation, filling and mass concrete, complete all as specified and directed.

Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in coping to pols, rounded or chamfered on edges complete all as specified and directed.

S & F in repair of LED lamp of capacity 9W -12W with base B22/ E27/ E14 suitable for wall bracket lights/ holder all as per sample complete all as specified and directed. MAKE : - Havells / Halonix / Surya or equivalent as specified in list of makes.

Supply and fix for in line pressure boosting electrically operated water pump suitable 240 volts, 50 Hz capacity 1 HP, 5 to 20Mtr head, with flow rate 24 LPM , suitable deliver pressure 5 bar having delivery upto 25/ 40 mm dia consisting of pressure tank of capacity 18 to 24 inch conforming to Model No.CFMSMBD 1.0 H of Make crompton Graves or equivalent of make Kirloskar/ KSB/ lumbi as approved including necessary electrical connections, GI fittings and removal of old unserviceable one complete all as specified and directed.

Material and labour for taking out booster pumping sets from foundation, disconnecting the water and electric connection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning/ servicing & greasing including refixing and replacement of unserviceable following parts including gland packing, gland nut bolt & replacement of damaged foundation bolts, reassembling of pumping set and transporting back to location, installing, connecting with water & electric connection and testing for performance for pump of capacity 0.5 to 1.0HP complete all as specified and directed. (a) replacement of old Unsv impeller with Diffuser -1 No (b) replacement of old mechanical seal -1 No (c ) replacement of pressure switch- 1 No (d ) replacement of pressure guage- 1 No

Material and labour for taking out electric motor by disconnecting from terminal & pump coupling, foundation complete removing of motor, carrying to workshop and return after opening motor removing burnt copper wire, cleaning all parts thoroughly rewinding motor with same gauge and same No. of turns of super enamelled copper wire including insulating materials like varnishing, heating etc and replacement unserviceable ball bearings, terminal plate, foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion for motor capacity of 0.5 HP to 1.0HP complete all as specified and directed.

Supply and fixing in reapir LED lamp 9 W capacity with B-22 base with backup for 4 hrs complete all as specified and directed. MAKE : - Havells / Halonix / Surya or equivalent as specified in list of makes.

unique power & control system