CA NO.CWE BLY/ GE (W) /91 OF 2025-26SPECIAL REPAIR TO ROAD, ROAD SIDE FURNITURE, DIVIDER AND FOOTPATH IN FRONT OF MH BAREILLY FROM GANDHI CHOWK TO NATRAJ CINEMA AT BAREILLY UNDER GE WEST BAREILLY

Amount

M&L for preparing old black top surface with wire brushes for removing caked mud, etc., swee-ping with brooms and finally fanning cleaned surface with gunny bag to remove all loose dirt, etc., priming tack coat with bituminous primer at 5kg/10 sqm using paving bitumen grade VG-10 complete all as specified and as directed.

M/L for Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with Minimum 5.5% binder content by weight of total mix, using bitumen as per design mix materials and rolled and compacted to required camber and gradient with mechanical mixer & plant/paver and laying machine and rolled with 8 to 10 tonne power road roller to required level gradient, camber and super elevation uniform and smooth surface complete all as specified and directed

Scarifying or picking existing gravelled,macadam or bituminous macadam surfaces in area n exc 400 sqmExc 50 mm and n exc 100 mm deep complete all as specified and as directed .

M&L for premix BM (consolidated thickness not exceeding 75mm) thick using binder content @ 4.50 % paving bitumen of any penetration laid/rolled compacted to req gradient & camber with 8 to 10 Tonne power roller complete all as specified and as directed.

Material and labour for painting lines, arrows, letters etc on roads, pavements and the like exc. 10 cm wide by applying 2 mm thick thermoplastic road marking paint of specified shade/colour either continious or broken lines to the required width and length over the existing painted furfaces/ new bituminous surfaces with solvent based thermoplastic road marking paint using semi automatic thermoplastic paint applicator machine driven by exparienced operator on road inlcuding all materials, labour, T&P and cleaning dirt, seals, oil, greases and foreign materials etc of road surface complete all as specified as directed.(Note thermoplastic road marking paint shall be applied as per manufactures instruction alongwith MORTH technology and speciality)

S & F in repair Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd DA -971-N completed as per manufactures instructions etc. all as specified and directed,

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection DA -953 height 1400mm, including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S & F in repalcement for Convex mirror of dia 1000mm made of PC meterial provided with suitable SS Pipe post (min 2100mm lenghth , 75mm dia) and fixing arrangement as per site requirement it should have clear and deficate mirror image valving 130 degree of viewing angle and unbreakable and stronger than glass complete all as speicified and directed

S & F in repalcement for pre-coloured highly resistance to serve impacts and harash weather speed breaker approx size of each piece730mmx245mmx50mm height 50mm Model No DA 1005 Design Patent No 202374 complete all as speicified and directed

S&F of cautionary/warning /speed limit sign board made of stainless steel sheet 1.5 mm thick fixed properly revited/welded to inner frame of stainless steel squre pipe of size 30mmx30mmx3mm fixed with welding to outer frame of board of size 50mmx50mmx3mm square pipe of stainless steel. Outer frame is welded to 01 Nos stainless steel Pipe of 50mm dia steel poles of 2600mm height. Retro reflective regulatory board of over all size min 600 mm x 450mm, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, logo, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. Staiinless steel pipes should be min 16 gauge (SS 304 Gde) welded to the frame with adequate anti-theft arrangement . Board to be fixed on ground incl excavation and grouting in PCC 1:2:4 type B1, 20mm graded aggrigatge of size 300mmx300mmx400mm deep complete in all respects as per direction of Engineer-in-charge.

S & F Reflective Radium Waterproof Warning Tape high intensity, night safety tape for road safety total with of each strip min 50mm wide complete all as speicified and directed .

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and as directed .

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed .

M&L Brickwork old size with subclass ‘B’ bricks, except brick straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified and as directed.

M&L Rendering 12mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM 1:6 finished even & smooth without using extra cement complete all as specified and as directed .

M&L Rendering 12mm thick on stone faces in cement mortar 1:6 and finished fair and smooth finishing without using extra cement complete all as specified and as directed.

M& L for two coat of cement base paint on new plastered surface including preparation of surface complete all as specified and as directed

M & L for RCC M-25 design mix using 20mm grade stone aggregate fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade etc, and the like including necessary demoliton of existing structure complete all as specified and as directed . .

M & L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping etc , and similar work (Where RCC/PCC band in walls, spanning and opening, the formwork soffit complete all as specified and as directed .

Mild steel bars TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

Mild steel bars TMT bar 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

M&L Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for demolition of PCC in any position and any description complete all as speicifed and directed

M&L PCC in foundations, filling and mass-concrete and levelling course type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed.

M&L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft & loose soil averaging 15cm deep and getting out complete all as specified and directed.

M&L for Machine pressed precast conctete coloured interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade over and including 25mm thick sand cushioning including watering complete all specified and directed.

Providing and laying at or ground level factory made kerb stone of M-30 grade cement kerb stone of requisite shape and size fixed in position to the required line, level and curvature, jointed with cemnet mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening wherever required complete all as specified and directed.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20 mm graded aggregate edging / coping etc complete all as specified and directed.

M& L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface complete all as specified and as directed.

S & F Reinforced concrete pipes 200mm dia , class NP2, laid and jointed complete with collars including cutting of road and making good as per road specification complete all as specified and directed.

S&F 110mm dia Cable Protection pipe pressures rating /PN Class PN 4 to protect electric cable complte all as specified and directed.

UTTRAKHAND BUILDERS (BID ID -3472260)

M/S Rajeev Sharma and Co. (BID ID -3477566)

TEAM ACC INFRABUILD PRIVATE LIMITED (BID ID -3470772)

Shikhar ji Enterprises (BID ID -3472304)

Garg Construction (BID ID -3473015)

Quality Builders (BID ID -3472974)

M/S SEWA AND SERVE BUILDERS (BID ID -3475505)