REPAIR/ REPLACEMENT OF STREET LIGHT, EARTHING, LT CABLES, DG SETS, FLAME PROOF LIGHTS INCLUDING CONNECTED ITEMS AT AF STN KALPI UNDER GE (AF) AMBALA

M&L for taking out old unserviceable cable of any size from trenches, GI pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note : (i) The Excavation and earth work shall be mesured and paid separately under relevant item of Sch.

Laying only cable any sizes obtained from item No 1 above with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and as directed.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with stranded aluminium conductor of cross sectional area 95 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and directed. NOTE: Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

All as per BOQ serial item No 3.00 here-in-before but of cross sectional area 50 sqmm 3½ core, complete all as specified and directed.

All as per BOQ serial item No 3.00 here-in-before but of cross sectional area 35 sqmm 3½ core, complete all as specified and directed.

All as per BOQ serial item No 3.00 here-in-before but of cross sectional area 25 sqmm 4 core, complete all as specified and directed.

All as per BOQ serial item No 3.00 here-in-before but of cross sectional area 16 sqmm 4 core, complete all as specified and directed.

Excavation in trenches not exc 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of poles/struts, stays, laying of cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and exceeding 1.5 metre in depth for base bedding of poles and getting out in soft/loose soil complete all as specified and directed.

Supply and lay dry river sand filling with and including punning for cushioning/protection to under ground cable with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.

Supply and laying sub class B bricks of size 23cmx11.5cmx7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Laying only bricks obtained from item No 1 here in before complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

Boring of holes under road,pavement, hard standing by trenchless technology using ultra sound technique and necessary machine with and including insertion of HDPE pipe of 80mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed.

Taking down old U/S galvanized iron tubing, (40-80) mm bore light grade laid in trenches/under road/drains, or fixed in poles/walls complete all as specified and as directed.

M&L for Galvanized iron tubing, 50mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, or fixed to poles/walls for protection of LT electric cable complete all as specified and directed. Note: Flat iron (25mmx3mm) clamps, bolts, nuts and washers shall be measured & paid for separately.

All as per BOQ serial item No 17.00 here-in-before but of size 80mm, complete all as specified and directed. bore.

S&F in repairs/replacement of PCC pole by steel tubular swaged pole 8.5 meter long type 410 SP-22 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.20 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number with and including dismantling and taking down old unserviceable pre-stressed concrete pole upto 9 metre long all as specified & as directed. Note : Excavation & earthwork, PCC in foundation & coping shall be measured and paid for separately.

S&F in repairs/replacement of PCC pole by steel tubular swaged pole 09 meter long type 410 SP-31 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.20 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number and including dismantling and taking down old unserviceable pre-stressed concrete pole 09 metre long all as specified & as directed. Note : Excavation & earthwork, PCC in foundation & coping shall be measured and paid for separately.

S&F in repairs/replacement of PCC pole by Prestressed concrete pole complete with pole arms 1.2 m , 9.0 metres long, 102mm x 172mm (+/-10%) at top and l2mm x 279mm (+/-10%) at bottom, class 10 complete all as specified and directed by Engineer-in-Charge. NOTE- Excavation & PCC will be measured and paid separately

S&F in repair stay assembly complete with accessories as shown on electrical plate No 1 of SSR Part-I with 16 mm dia 180 cm long stay rod, 300mm x 300mm x 6mm thick stay plate, & GI stay wire of 7/8 SWG, bow of suitable length as reqd complete all as specified including taking out old unserviceable stay assembly complete. Note : Loop insulator, clamp, excavation, earth & PCC work shall be measured and paid for separately.

Demolation of Cement concrete (unreinforced) of any description and in any position as in coping / pedestal of poles complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregate as in foundation of stay assembly & poles and similar works complete all as specified and directed. Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

M&L for PCC 1:3:6 type C2 using 40 mm graded mechanically crushed stone aggregate in mass concrete for pole all as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B2 using 20 mm graded mechanically crushed stone aggregate in coping concrete for pole complete all as directed by Engineer-in-Charge.

S&F cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections conforming to Grade E-165 (Fe 290) including nuts, bolts, washers, welding, bending cold or hot, drilled holes for bolts in any shape or size etc, complete, all as specified. Including Dismatling & Taking down old unserviceable cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts. Note :- Size, section and shape of steel sections shall be as directed.

S&F aluminium conductor steel reinforced (ACSR) of any size including jointing with and including aluminium binding wire 2 mm dia and stretching complete on LT poles all as specified and as directed.Including Dismatling & Taking down old unserviceable aluminium conductor steel reinforced (ACSR) from overhead lines on LT poles of any size. Notes :-(i) The ACSR conductors shall conforming to IS-398 (Part-II) and as specified in SSR Part-I. (ii) The unit rate quoted shall also deemed to include for supply and fixing of binding wire, aluminium tapes etc which shall not be included in the weight of conductors for payment. (iii) Weight of conductors shall be determined by measuring the horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra shall be added for sag, jointing, jumpers etc. (iv) Weight of the conductors shall be calculated from the nominal weights given in tables in the relevant IS code.

S&F LT line polyproplene composite phase separators (bolted Type) for 2 wire conforming to IS 1445 all as specified and directed.

All as per BOQ srl item No 29.00 but 3 wire complete all as specified and directed.

All as per BOQ srl item No 29.00 but 4 wire complete all as specified and directed.

Dismatling & taking down old unsv shackle/loop any type insulators complete all as directed by Engineer-in-Charge.

S&F Loop type insulator, vitreous porcelain, white, brown or green with dimensions 90mm x 140 mm and clearance hole 25.5 mm, ISI marked complete all as specified and directed.

S&F shackle type insulator porcelain vitreous, white, brown or green, working pressure 1100 Volts, 90mm dia and 75mm height including galvanized mild steel straps of section 31mm x 3mm with 12mm dia insulator bolts, washers and nuts, complete all as specified and directed.

Restraining/tightening of existing LT over head ACSR conductor of any size upto permissible sag in between existing span including GI earth wire, clamps, cradles etc. including new 2mm dia aluminium binding wire complete all as specified and as directed. Note : The length of each conductor shall be measured & paid for the rate quoted shall be for one conductor.

M&L for cutting/trimming the tree branches 5 mtr adjacent to the LT OH lines/street light feeder on both sides and removing the the same to out side and disposing same at a distance upto 100 mtr complete all as specified and direcetd. Note: (i) per span distance 25-40 mtrs.

Surface dressing n.exc. 15cm deep in soft/loose soil, leveling the uneven surfaces and removing all vegetation hedges shrubs at any Sub Stns/MRS//E&M installations to give even and neat look complete all as specified and directed.

M&L for painting to PCC LT pole upto 8.5/9 metre long of any size with two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.2 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over cross arms, brackets, bracings, clamps, hooks etc and marking pole numbers including preparation of old surfaces for painting complete all as specifiedand directed.

M&L for painting to steel tubular LT pole upto 9 metre long of any size with two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.2 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint to remaining portion of steel pole, over cross arms, brackets, bracings, clamps, hooks etc and marking pole numbers including preparation of old surfaces for painting complete all as specified and directed by Engineer-in-Charge.

S&F in repair MCCB, 4 Pole, 250 Amps rating, rupturing capacity 35 kA, 415 Volt grade, AC, 50 Hz, with adjustable Thermal - adjustable Magnetic setting and making connections, with and including spreader terminal/ thimble of suitable size/aluminium bus bar as required complete including disconnecting and taking down old unserviceable MCCB, all as specified & directed.

S&F in repair MCCB, 4 Pole, 160 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, with adjustable Thermal - adjustable Magnetic setting and making connections, with and including spreader terminal/ thimble of suitable size/aluminium bus bar as required complete including disconnecting and taking down old unserviceable MCCB, complete all as specified and directed.

S&F in repair MCCB, 4 Pole, 100 Amps rating, rupturing capacity 25 kA, 415 Volt grade, AC, 50 Hz, with adjustable Thermal - adjustable Magnetic setting and making connections, with and including spreader terminal/ thimble of suitable size/aluminium bus bar as required complete including disconnecting and taking down old unserviceable MCCB, complete all as specified and directed.

Disconnecting and taking down XLPE insulated LT electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area upto 150 sqmm 3½ core from LT Pole/LT Panel and cutting the burnt portion/un-insulated portion of LT cable and making the end of LT cable suitable for re-connection including replacement of lugs/thimbles and re-connecting the LT cable on LT Pole/Lt Panel and connecting with over head conductor/Panel including taking out the suitable length of cable required for re-connection from loop with and including necessary excavation and making good to disturbed area complete all as specified and directed.

M&L in repair for earthing to electric equipments / panels etc with and including galvanized MS earth plate electrode of size 600x600x6mm thick burried vertically in ground to a depth not less than 2.25 metre below ground level, with top edge of earth plate not less than 1.5m below ground level as shown in electrical plate No 3 of SSR Part I, the earth plate surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides, excavation & earth work in any type of soil and removal of surplus soil upto 50m including galvanized mild steel strip 32mm x 6mm as earth lead, welding at top of electrode and other end of strip connected to equipment body/panel/test point with two Nos nuts bolts or welding with steel structure,GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 5.00 metre above ground level fixed along equipment body/panel with and including 25x3mm FI clamps, bolts, nuts and washers, PCC chamber (1:3:6) type C1, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering, 75 mm thick RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing.

S&F in repair single pointed air termination aluminium rod 12mm dia 300mm long fix with earth strip by providing nut & bolts all as specified and directed.

S&F in repair test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed.

S&F in repair aluminium strip 25mm x 3.15mm complete with saddle and fixing screws etc for roof conductor and down conductor on wall etc above ground complete fitting the strip all as specified and directed.

M&L welding in repairs exc 2.5cm but not exc 5cm in length, thickness of metal to be welded not exceeding 6mm, complete all as specified and as directed .

S&F in repair butt hinges of size 75mm, heavy weight, cold rolled mild steel, ISI marked, including necessary welding, fixed in repairs, complete all as specified and directed.

S&F in repair fabrication of pannel door with CRCA MS sheet 2 mm thick, including bending or turning up, mitred angles, etc. as required size, including provn of manuval lock complete all as specified and directed.

M&L for painting of APFC/LT/SL panel board of any type & sizes with two coats of synthetic enamel paint smoke greay over a coat of redoxide painting including preparation of old painted surfaces by scrapping of old painted surface and making good surface all as directed by Engineer-in-Charge.

M&L Cable jointing kit for 1.1 KV (Earthed) grade cable straight through termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armourend aluminium conductor cable of size upto 95 sqmm complete all as directed by Engineer-in-Charge.

Supply and fix for pole mounted juction box made out of one piece moulded SMC IP65 protection having aluminium bus bars 63 Amp three phase and neutral with one No MCB SP 6 Amp for street light, cable entry from bottom, maintenance free size 300x200x100 mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable all as specified and directed of make : Sintex/Universal/Simens/ABB.

S&F cable junction boxes IP 66/67 weather proof for out door installation with knock outs cable entry junction box size should be 200 x 255 x 100 mm with terminals including complete all accessories, all as specified and directed by Engineer-in-Charge.

Dismantling and disconnect all electric cable from existing LT panel/ APFC panel and taking down LT panel/ APFC panel for shifting to other location within 500 Meter, inside cantt area, and including grouting of panel, embedded in PCC 1:2:4 using 20 mm stone aggregate upto 30 cm above ground level complete, and re-connection all electric cable with lugs to LT panel complete all as directed by Eng-in-Charge.

S&F in repair sheet steel enclosure outdoor type, front door openable, locking arrangements, made out of 2mm thick sheet steel suitable for MCCB's 4 pole upto 200Amps, duly painted with two coats of synthetic enamel paint over a coat of redoxide complete all as directed by Eng-in-Charge.

Testing of LT UG cable by checking the insulation resistance using 5000v x 10000v fault insulation locator tester, identify any number of cable fault in a single stretch (from source to load) and pin point the fault location complete all as specified & as directed for length upto 300 m . Note: (i) In single stretch any Nos of fault shall be paid as each job.

S&F in replacement of low density polyethylene (LDPE) pipes of pressure rating 16 kg/cm2 of 20 mm bore complete with connected accessories including dismantling of old unserviceable any size and type pipe complete all as specified and directed.

Disconnecting electric connection and Taking down of street light/Flood fittings from pole/High mast of any type size and model removing of unserviceable spares / accessories for repair/replacement of the same with and including refixing of spares and light fittings to existing pole/High mast and testing on complection complete all as specified and directed. Note : (i) Contractor shall provide one Electrician and two helper in all working days along with working & safety tools and wooden lader. (ii) Spares/Parts for reapir/replacement will be measured and paid separately as supply only under relevent item of this schedule.

Supply only Electronic driver suitable for 20-30 Watt LED Street light fitting of any capacity and type complete all as specified and directed.

Supply only Electronic driver suitable for 45-70 Watt LED Street light fitting of any capacity of any capacity and type complete all as specified and directed.

Supply only Electronic driver suitable for 90-120 Watt LED Street light fitting of any capacity and type complete all as specified and directed.

Supply only Electronic driver suitable for 200-250 Watt LED Flood light fitting of any capacity and type complete all as specified and directed.

Supply only PVC insulated Sheathed multi stranded unarmed aluminium conductor 1.5 sq mm 2 core cable LT 1100 volt grade complete all as specified and as directed.

M&L in replacement for Time lite distribution board outdoor operation type with in sheet steel enclosure of capacity 63 Amp comprising of 3 pole 63 Amp power contactor with coil voltage 415 Volt AC, MCB TPN 63 Amp 10 KA, Analog time switch and togle switch two way for manual and auto operation with and including internal connection with suitable size copper conductor wire, complete with and including dismantling unsv Timer DB complete all as specified and directed. Make: Havells/Legrand/L&T/Indo Asian as approved by GE.

Digging out incoming/ outgoing cables of any sizes from loops near pole junction box in trenches, cutting burnt out uninsulated portion of cable and relaying /refixing in trenches & returning, refilling the excavated soil and connecting the cables with bus bars including provision of suitable size of aluminium lugs, complete all as specified and as directed.

Taking down old unserviceable light from street light pole/Bldg/Post and S&F in repair of new 30 watt LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting Source and LENs embedded toughened glass cover with IP66 Protection complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable light from street light pole/Bldg/Post and S&F in repair of new 45 watt LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting Source and LENs embedded toughened glass cover with IP66 Protection complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable light from street light pole/Bldg/Post and S&F of New LED security light 70 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughened glass with lens with IP66 Protection, complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable light from street light pole/Bldg/Post and S&F of New LED security light 90 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughened glass with lens with IP66 Protection, complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable light from street light pole/Bldg/Post and S&F of 120 Watt LED street light made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable light from street light pole/Bldg/Post/High Mast Pole and S&F in repairs LED flood light 150 Watt 230 volt AC made up of pressure die cast aluminium housing with integrated IP lens and SMD LEDs with IP-66 protection with efficiency 120 lumens per watt alongwith 10kv SPD including all fixing accessories, complete all as specified and directed.

All as per BOQ item ser No. 68.00 here-in-before but of cap 200Watt complete all as specified and directed by Engineer-in-Charge.

S&F in repairs post top lantern LED type 25 watt 230V AC outdoor type IP-65 protection, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, clear cover for bright illumination complete with and including prewired all as specified and directed by Engineer-in-Charge.

Supply, Installation, commissioning and testing in replacement of Lithium based energy integrated solar street light 40 Watt in single metal/FRP body encases solar panel 60Wp monocrystalline, Lithium Ion (LiFePO4) battery, solar panel and charger built into the luminaire 11.1-12.8V, 30AH with inbuilt BMS, High brightness LED lamp, charge controller cum driver, with adjustable MS clamp, bracket suitable for pole/wall mounting complete all as specified and directed by Engineer-in-Charge. NOTE- (i) Firm should give warranty for the complete fitting including all Electric/Electronics connected parts for minimum 3 years. (ii) The complete documents regarding warranty shall be handed over to the Engr-In-Charge at the time of execution of the items. In turn contractor may obtain, Warranty/ Extended warranty from the manufacturer for the above period. Make : IYSERT/Philips/Havells/Bajaj /surya /CG or its equivallent as approved by the GE.

M & L for street light bracket made out of GI pipe light grade 32/40 mm dia 1.2 mtr length bent to shape including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer with and including taking down old one and refixing the street light fittings complete all as specified and directed by Engr-In-Charge.

Supply, testing and commissioning of rechargeable LED Torch 230Volts, body material: plastic,Battery type: Min.4000mAh, Li-ion, wattage: 5watt complete with all connected accessories all as specified and as directed by Engineer-In-Charge. Make: Havells of Model No: LHEXTGP1CN1G005 or of equivalent in Wipro/Everday.

Supply, testing and commissioning of Portable, compact and multipurpose step Aluminium foldable Telescopic ladder 18feet, 14steps, can support upto 150kg complete all as specified and as directed by Engineer-In-Charge.

S&F in replacement of Electrical insulating rubber mat of size ( 2 mtr X 1 mtr X 2 mm ) tested for LT voltage 1100 volts complete all as specified and directed by Enge-in-charge. Make: Jaipuriya Brothers or as approved by GE.

S&F in replacement of powder coated metal First aid Kit box, cabinate type, water proof, wall mountable type, multi compartment of minimum size 38(W)X32(H)X15(D) cm, suitable for10 persons complete with all first aid medical kit accessories as per factory act 1948 complete all as specified and as directed by Engineer-In-Charge.

S&F Electric shock and its management chart as per BIS 1986, of size not less than 0.90 (L) X 0.60(W), showing four artificial respriratory methods, in fibre board, four side corner holes for easy fixing complete all as specified and as directed by Engineer-In-Charge.

M&L for Cleaning the vegetation including grass, bushes, small trees and all vegetation growth complete including digging out the root of bushes, small trees around the installations/sump/OH reservoir, valve chamber, including chamber etc filling the rough holes with earth, levelling the surfaces by removing all debris to a distance not exceeding 50m complete all as specified and directed.

M&L for Repair to Non Return Valve 150 mm bore in position and S&F in replacement of U/S Parts such as brass ring packing/Rubber packing, nuts,bolts, washers, rubber insertion sheet complete all as as required to make it fuctional complete all as specifed and directed.

All as per BOQ srl item No 84.00 her-in-above but 100 mm dia, complete all as specifed and directed.

M&L for Repair & Opening stuffing box of sluice valve 150 mm bore and S&F in repair of U/S parts i.e. Stainless steel spindle, check nut fabricated out of superior quality all as per sample as required at site includinguding replacement of unserviceable bolts, nuts & washers gaskets etc complete all as specifed and directed.

All as per BOQ Srl item No 86.00 here-in-above but 100mm bore dia, complete all as specifed and directed. .

M&L for lifting/lowering of column pipe flanged 100mm/80mm bore with submersible cable from bore hole of tube well, pump set of any capacity and lowering after repair in borewell complete all as specified and directed by Engr-in-Charge. Note: (i) Lifting & lowering of pump set upto 120mtrs deep will be deemed to be included in unit rate. (ii) Lifting & lowering of pump set to be completed out within 24hrs from intimation failing which contractor shall be liable for a penalty of Rs. 500.00 for every 24 hours beyond initial 48hours. (iii) Rubber gasket, nuts & bolts for replacement shall be deemed to be included in the unit rate. (iv) water proof Insulation tape for replacement deemed to be included in the unit rate.

M&L for rewinding of submersible motor with PVC coated copper winding wire as per existing gauge insulation material, after stripping of existing worn out winding, M&L for sealing kit, O-ring, Gasket, water drain plug, sand guard, cable packing ring, cable gland ring, upper/lower bearing, adopter piece, motor key, neck ring, suction case, Hex bolt, Circlip washer, Motor coupling, thrust plate, motor bush etc complete, reassembling with pump set of the 25-40HP capacity complete all as specified and directed

M&L for Repair/Overhauling of submersible pump including replacement of Hex bolt, Circlip washer, bowl stud, rotor bleach, pump bush, neck ring etc including repair complete all and reassembling pump set of 25-40HP capacities, complete all as specified and directed Note: (i) Any misslenious spares required for efeective functioning of submersible pump the same shall be deemed to be included in the unite rate. (ii) This item will include all the connected acessories except the following mentioned items

Supply only in repair Thrust Bearing, complete all as specified and directed

Supply only in repair Bush for pump, complete all as specified and directed

Supply only in repair coupling bush, complete all as specified and directed

Supply only in repair Thrust bearing housing, complete all as specified and directed

Supply only in repair stage bowl, complete all as specified and directed

Supply only in repair Impeller GM, complete all as specified and directed

Supply only in repair Motor bearing bush, complete all as specified and directed

Supply only in repair SS sleeves, complete all as specified and directed

Supply only in repair sand guard

Supply only in repair Pump shaft

Supply only in repair Non return valve

Supply only in repair Diffuser

Supply only in repair Copper thimble 16 Sqmm

Supply only in repair Key for coupling pumpset

M & L for repair to leaking/block/broken and cleaning of GI pipe line of bore 80mm/50mm by inserting extra fittings/nut bolts if required, making good leakless the existing joint, including necessary excavation and earth work, (returning filling will be done after testing the joint) complete all as specifed and directed.

M & L for repair to leaking/block/broken and cleaning of GI pipe line of bore 25mm/20mm by inserting extra fittings/nut bolts if required, making good leakless the existing joint, including necessary excavation and earth work, (returning filling will be done after testing the joint) complete all as specifed and directed.

Cleaning of OHT capacity of 50000Gln water throughly by removing mud,grits etc complete all specified and directed. Notes:- rates quoted shall deemed included for following :- (i) Cleaning inner surfaces of tanks complete with scraping with steel wire bruses, pressure wash,removing mud, sludge collected inside the tank manually,removal of mud to a distance not exceeding 50mts. (ii) Washing with clean water and bleaching powder or with high streanth calcium choride mixture thoroughly internally removing left out sludge if any to a distance not exceeding 50mts including writing capcaity of SWT, cleaning dates,due dated for cleanig with black synthetic enamel pump with existing pattern.(iii) one coat of epoxy cementitious coating for positive side water proofing after preparation of inside surface. (iv) Contractor shall assure the safety of worker/labour while cleaning the over head tank and will solely be responsible for any mishap at site.

M&L for Cleaning of SWT capacity of 10000Gln water thoroughly by removing mud grits etc complete all specified and directed. Notes:- rates quoted shall be deemed to include for following :- (i) Cleaning inner surfaces of tanks complete with scraping with steel wire brushes, pressure wash,removing mud, sludge collected inside the tank manually,removal of mud to a distance not exceeding 50mts. (ii) Washing with clean water and bleaching powder or with high strength calcium choride mixture thoroughly internally removing left out sludge if any to a distance not exceeding 50mts including wiriting capcaity of SWT, cleaning dates,due dated for cleanig with black synthetic enamel pump with existing pattern.

Scraping old existing paint from pipe of dia upto 150 mm at installations including making smooth surface by filling putty and applying two coat of synthetic enamel paint of approved blue colour incl marking of inlet/outlet etc with the help of white colour or complete all as specified and directed

Supply only Calcium Hypochlorite in granular form in 45 Kg drum, having minimum 65 -70% of available chlorine (Ca(OCI)) with anti-corrosive and anti-scaling properties suitable for human consumption complete all as specified and directed. Make: PuriChlor (SRHSH) or as approved by GE.

S&F foot valve 100mm dia size (CI strainer and GM working parts), single end flanged, one side flanged, including providing rubber gaskets of suitable size, nuts, bolts, washers, etc. and dsconnecting and taking down existing sizes unserviceable foot valve complete all as specified and as directed.

Supply, installation, testing and commissioning in replacement of monoblock Pumpset, centrifugal design pumpset, capacity-2HP/1.5KW, suction head 50mm & delivery head size 40mm, speed minimum 2840RPM, head: minimum 15 Mtr & maximum 25 mtr, discharge 2.2 - 4.1 LPS, impeller-cast iron/noryl, Cast iron motor body, carbon steel pump shaft, sealing: Mechanical Sealing, frequency 50 Hz, no of stages-01, ISI marked, three phase, 415 Volts complete including disconnecting the Unsv pump and depositing the same to MES Yard all as specified and directed by Engr in charge. Make: Kirloskar of Model No: KDS-225++ or of equivalent in Crompton/KSB as approved by GE.

S & F monobloc pumpset of capacity 0.75KW/1 HP single phase, 210 Volts, Suction/delivery size -40mm, No of stages-01, Head Min. 15, Head max. 20, Discharge Min. 0.6LPS, Discharge Max. 1.8LPS, ImpellorCast Iron/Noryl, Motor body/pump shaft- carbon steel, sealing-mechanical seal, alongwith complete all as specified and directed by Engr in charge. Make: Kirloskar of Model KDS 128+ or of equivalent in Crompton/KSB as approved by GE.

Water testing report of BASIC TEST / HEAVY METAL TEST /PATHOGENS TEST as per list . Collection of empty sterlised bottles from the Govt/ authorised lab Haryana/Punjab and taking out water sample from user end / pump house as per procedure. Water sample filled bottle depositing to the same lab for anaylsis test and collect the sample report and deposited to E/M sub divn complete all as specified and directed by Engr-in-Charge.

Supply, installation, testing and commisioning of submersible pumpset of cap 22.5KW/30 HP, 14 stage, water filled borewell submersible pump, head range 260-50 Mtr, Flow rate-Min. 700 LPM, Bore size-200MM, Out let size-75mm, Motor body-stainless steel, Flow type-mixed flow 3 phase, with and including its reducer fabricated on site as per existing column pipe, complete all as specified and directed by Engr in Charge. Make: Waree/KSB/Kirloskar/.Crompton as approved by GE.

Supply and laying in repair PVC insulated cable submersible flat copper 3 core 16 Sqmm 1100 volt grade, complete all as specified and directed.

S&F FASD three phase submersible pump starter comprises of power contactor, over load relay, single phase preventor, AV meter, three phase indicator lamp etc. complete with copper wiring housed in enclosure for capacity 50HP including proper fixing arrangement, copper cable thimble etc and including taking out old unserviceable starter and all as specified and directed Make: L&T model No MU-G50FASD or of equivalent in siemens/ABB/ Schneider as approved by GE.

Demolition of existing valve pit chamber and M&L for masonry valve pit of size 1500x1500x1050mm internal size complete with excavation, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified and directed.

All as per item No 102.00 but of capacity 160 KVA all as specified and directed.

All as per item No 102.00 but of capacity 1010 KVA all as specified and directed.

Supply only V belt

Supply only Battery Terminal

Supply only Automatic Voltage Regulator for 62.5 to 160KVA DG set, complete all as specified and directed

Supply only Battery lead 1 mtr long (Red for +ve, & Black for -ve), complete all as specified and directed

Supply only Battery 120AH, maintenance free 12 volts, complete all as specified and directed

Supply only Battery 150AH, maintenance free 12 volts, complete all as specified and directed

Supply only Battery 180AH, maintenance free 12 volts, complete all as specified and directed

Supply only Selfstarter Motor 12V (DC) for 62.5 KVA, complete all as specified and directed

Supply only Charging alternator 12V/35A (DC) for 62.5 KVA, complete all as specified and directed.

Supply only compact automatic battery charger 12V/10A (DC) for 62.5- 75KVA DG set, complete all as specified and directed.

Supply and fill new engine oil of make Servo super 20W40 of Indian oil or equivalent grade of Hindustan Petroleum as directed by Engineer -in -Charge.

Supply, fixing, installing, testing and commissioning of LT Panel, outdoor type cubical shape,three phase, 4 wire, Aluminium bus bar rating 400 amps for phases and 200 amps for neutral made out of CRCA sheet ,3.0 mm thick ,factory fabricated double door front side & back side openable, CPRI approved, powder coated ,dust and vermin proof, provn for ventilation, angle iron frame and four legs of 75x75x6mm thick angle iron,1 ft long grouted on PCC foundation of height not less than 40 cm from the ground level, grouting properly, and of suitable size to accommodate the items mentioned below and having separate compartment /chambers for cable gallery busbar and each switch gears all as specified and comprising of following including necessary cable connections to the MCCBs, voltmeter, Ammeter and cable lugs etc and the following items included in the panel as under. (i) MCCB 4 Pole, 415V, adjustable type, 250 Amps with breaking capacity 25KA -01 No (Incoming) (ii) MCCB 4 pole 415V fixed type, 100 Amps with breaking capacity 16KA. -03 Nos (outgoing) (iii) Fully Automatic Star Delta Starter MU-G50 FASD, capacity 50HP (With Wideband Coil)-02. Make: L&T (iv) On-load change over switch 250 Amps, 4Pole, 415 V, 50Hz front handle operated type -01 (v) Digital type Voltmeter 0- 500 volt, (vi) Digital type Ammeter 0-250 Amp, with Current Transformers. (vii) Phase indicating lamps LED type ( red , yellow, blue) -01 set

M&L for earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc. as shown in electrical plate No. 3 of SSR Part-I and connection to main switch board/test point/panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus soil to a distance not exc. 50m, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm bore for watering and 15mm bore 3m long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shallb e provided o CI frame etc.complete all as specified & as directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S&F in repairs of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size10 sqmm 2 core stranded alumiium conductor complete with and including taking down old unsv service wire and suspended by existing insulating hangers not more than 1 metre apart along with 4mm suspension wire all as specified and directed by Engr-in-Charge.

S&F in repairs of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of size16 sqmm 2 core stranded alumiium conductor complete with and including taking down old unsv service wire and suspended by existing insulating hangers not more than 1 metre apart along with 4mm suspension wire all as specified and directed by Engr-in-Charge.

M&L for run lead joints for 150 mm dia of cast iron Spun pipes/fittings including burning out old joints and recovering lead and pouring it in joints to make it leak proof complete with and including excavation and earth work complete all as specified and directed.

M&L for run lead joints for 100 mm dia of cast iron Spun pipes/fittings including burning out old joints and recovering lead and pouring it in joints to make it leak proof complete with and including excavation and earth work complete all as specified and directed.

S&F in replacement for Air Purifier covers Min. 450 sq feet, three stage purification (Pre filter, activated carbon filter and True H13 HEPA filter, in built filter change indicator, white in colour, power source: corded electric, the surround 360 degree air technology swiftly catches bacteria, dust, allergens and odours from all directions, delevering clean and pure air, noice level>50dB(A), adjustable speed and timer settings complete all as specified and directed by Engr-In-Charge. Make: Eureka Forbes/Philips/Havells or as approved by GE.

Supply only total residual chlorine test kit CHLOROSCOPE MODEL-C alongwith OT Solution complete all as specified and directed.

S&F, installing, testing and commissioning of pure sine wave powerful inverter combo of capacity 3000VA/36Volts (out put power Min 2160 Watts) with three Nos 150Ah 12 Volts tall tubular batteries complete with and including wheel mounted modular battery compartment, inter connection with suitable capacity copper wire complete all as specified and directed. Note: Warranty should not be less than 24 months for inverter and 36 months for battery Make: Microtek/ luminious/ Okaya/ V-Guard

Please Enable Macros to View BoQ information