PROVISION OF GLASS CUBICAL AND ASSOCIATED FACILITIES AT WT NO. 14 FOR RUNWAY CONTROLLER DUTIES AT AF STATION BAREILLY.

Amount

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Cutting, dismantling and scraping of reinforced cement concrete, surface area not exc. 0.10 Sqm and upto depth to get existing reinforcement bars out suitable for welding, hooking to join the new reinforcement bars with old one complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed.

M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:4 finished even and fair complete all as specified and directed.

M & L for rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and fair complete all as specified and directed.

M & L for rendering 20 mm thick cement plaster over cement concrete roof surface in cement mortar 1:4 with and including mixing of water proofing compound (Powder) @ 3% by the weight of cement finished even and smooth complete all as specified and directed. NOTE: - COST OF WATER PROOFING COMPOUND SHALL DEEMED INCLUDED IN THE UNIT RATE OF THIS ITEM.

M & L for preparation of newly plastered previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

S & F Fine fissured board of size 595 X 595 X 15 mm thick mineral fibre accoustic false ceiling tiles with and including false ceiling grid system at any height with back of the ceiling duly sanded and finished with a coat of protective paint and front duly finished and fixed to true lock PVC DLE KL-24 suspension system (hot dipped galvanised steel section) of exposed T-section grid with exposed face powder coated white colour including making good electric service such as point wiring etc. complete all as specified and directed. NOTE: - For detailed description and specificatios of ceiling grid and ceiling board refer Particular Specifications hereinafter. (CAT Part No. 1833 M of ARMSTRONG or as approved by GE in writing.)

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S & F of aluminum section powder coated of approved colour as in door frame and shutter partially glazed with 5 mm thick one side refelctive glass and partially panelled, panel made of 5 mm thick aluminium composite (Alco) panel duly fixed with aluminium clips of suitable size comprising of the following complete as specified and directed: - (i) Frame made of section size 100 X 40 X 2 mm thick. (ii) Styles of shutter made of section size 85 X 44.45 X 1.70 mm thick. (iii) Top rail and bottom rail made of section size 114.30 X 44.45 X 1.7 mm thick. (iv) Middle rail made of section size 83.50 X 44.75 X 1.7 mm thick. (v) Glazing clip 0.7 mm thick of appropriate size. (vi) 2 Nos. stainless steel Handle 125 mm long as approved. (vii) Tower bolt having dia of bolt 9.90 mm dia and 200 mm long. (viii) Mortice lock 100 mm size, 7 Livers make Godrej. (ix) Hold fast aluminium 100 mm long. (x) Rubber gasket made of virgin white PVC and namda rope of appropriate size for proper air tightness.

S & F of aluminium anodised powder coated of approved colour, sliding type 02 track (01 glazed and 01 gauzed shutter) window with sliding shutter and frame with and including aluminium grill, 4.8 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: - (i) Frame section 61.85 X 31.75 X 1.20 mm for top, bottom and sides rails weight not less than 0.659 Kg per Sqm. (ii) Shutter for top, bottom and side rails 40 X 18 X 1.50 mm. (iii) Glass 4.80 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips with and including necessary handles, tower bolt etc. as directed. (iv) Aluminium grill powder coated not less than 1.00 Kg per Sqm duly fixed with aluminium section 20 X 10 X 1.5 mm size. (v) Stainless steel wire cloth. (vi) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight. (vii) Locking arrangement and providing Namda rope to make the frames air tight.

S & F of rolled mild steel sections confirming to Fe-410-W (Grade E-250) Quality 'A', as in framing for plateform to mount wooden flooring and the like fixed with angle cleats and connecting plates etc. including drilling holes suitable for fixing of flooring as required complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S & F of 30 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with self tapping screws as in flooring and skirting complete all as specified and directed.

S & F of 2 mm thick linoleum, wood grain printed, laid dry in wooden floors including stretching, cutting and fitting duly sealed with approved adhesive complete all as specified and directed.

S & F of solid PVC Wall Lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 5 mm thick and 35 mm wide PVC sheet fillet for fixing of wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 5 mm thick Printed PVC sheet in strips and channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent cement as per specifications and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

M & L for 20 mm thick machine cut granite stone slab as in steps, jambs, cills, cooking platform and similar items, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing, chamfering / bullnosing to exposed edges over and including 20 mm thick screed bed or bedding layer of cement mortar in CM 1:4 complete all as specified and directed.

S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for fixed type window frames with one or more rebates including joining cleat etc. for fixing complete all as specified and directed. NOTES: - (i) As far as possible aluminium sections Bearing No. TU 4301 (50 X 100 mm tube), TU 4301 (50X100 mm tube), TU 3247 (20 X 35 mm tube), TU 2698 (20 X 20 mm tube), TU 3855 (10 X 10 mm tube) and T 990 (T section) of HINDALCO make to be used for execution of this item. However in case of non availibility aluminium sections of other makes as given hereinafter to be used after written approval of GE. (ii) 02 Nos. small opening of size 600 X 600 mm shall also be provided as sliding window at the location as directed by Engineer-in-Charge. (iii) Glass panes, rubber gasket, namda rope shall be measured and paid separately under respective item of this schedule. (iv) The aluminium structure alongwith double glass panes shall suitable to withstand the sustained wind speed of 125 miles per hour or more as per site. (v) All required tools to fix and support the aluminium and glass structure shall be arranged by contractor on its own and cost of this aspect deemed included in the unit rate of these items.

S & F of double layered vaccum glass consisting 10 mm thick tinted toughened glass (tint as aproved by GE) having 1.14 mm PCB lamination for outer face and 10 mm thick toughened float glass for inner face with a gap of 12 mm between both glass sheets duly hermatically sealed with silicon sealent all around and entrapped air between both glass sheets shall be dehydrated by the certified drying agent, area of each glass pane exc. 0.50 Sqm duly fixed with and including suitable size rubber gasket of white PVC and namda rope complete all as specified and directed. NOTE: - The glass panes shall have seamless joint, space in between two glass layers shall be hermetically sealed and entrapped air shall be dehydrated with drying agent. Cost of rubber gasket, namda rope and other fixing accessories as required fixing of glass with aluminium frame shall deemed included in unit rate of this item.

S & F of 40 mm bore steel water tubing medium grade with provision of one No. mild steel hook as directed at site and erected on roof slab above 10.00 metres height complete all as specified and directed.

M & L for point wiring in colour coding Red, Black and Green (RBG) for one light point / fan point (Independent point), controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including non-metallic PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or 1.6 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed.

All as per item No. 35.00 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the independent board complete all as specified and directed.

All as per item No. 35.00 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the same board, controlled with other switches complete all as specified and directed.

All as per item No. 35.00 hereinbefore but wiring for one 3 / 6 pin 15 Ampere socket outlet point on independent board and wiring using with 2.50 sqmm size cables complete all as specified and directed.

S & F of switch piano flush button single pole 230 volts, one-way 5 Ampere complete all as specified and directed.

S & F of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed.

S & F of ceiling rose surface bakelite, 65 X 50 mm, three terminals, PVC / polycarbonate insulated body complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

S & F of switch piano flush button single pole 230 volts, one-way 15 Ampere complete all as specified and directed.

S & F of suspended surface mounting fullglow high efficiency glare free LED luminaire suitable for 2'x2' ceiling grid as per Cat. Part No. RC380B LED 30S-6500 G4 L60W60 PSD OD WHOC (FullGlow Office Complaint) of Philips or DROPDOWNFLAT2X2PLR36WLED857S (FLAT 2X2) of Havells or LM24-421-XXX-57-DD, 33 Watt (Immaculate DD) of Wipro duly pre-fitted with all accessories complete all as specified and directed.

S & F of LED type table / desk light 4 Watt capacity, radiation free ideal LED light source with no harmfull ultra violet, safe to use, environment friendly alongwith necessary fixing arrangement on desk as per Cat. Part No. LM62-360-XXX-50-XX, 4 Watt (NuLED DESK) of Wipro or having same specifications in Philips or Havells as approved by GE duly pre-fitted with all accessories complete all as specified and directed.

Supply and fixing of 400 mm sweep, wall mounted cabin fan Make- Orient or Usha or Havells, 1350 RPM, 5 star rating, single phase, 230 volts AC, 50 Hz, single phase metalic body (Heavy Duty) complete with pull cord control for speed and oscilleting mechanism, necessary mounting arrangement and making electric connection using three core flexible twisted copper conductor of size 23/0.0076 complete all as specified and directed.

S & F of 1100 volts grade heavy duty two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of multi-stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed for the following: -

(a) 2 X 2.50 Sqmm as main wires + 1 X 1.50 sqmm as earth wire.

(b) 2 X 4.00 sqmm as main wires + 1 X 2.50 sqmm as earth wire.

S & F of factory made V TPN DBs-DPX-160 MCCB DB's, 4 way, IP-43 protection-IK09 with metal door with 160 Amperes copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 MCCB as incomer and SP 09 Nos. and TP 01 No. MCB's as outgoing complete all as specified and directed. (Cat. Part No. 507745 of Legrand or Cat. Part No. A9HVD04M of SCHNEIDER or Cat. Part No. CSDBMCCB225DD04IP43 of C&S)

S & F of MCCBs, 63 Ampere, 50 Hz, 415 volts, 4 pole, 16 KA, thermal magnetic all as specified and directed.

S & F of MCB single pole 240 volts, 40 Ampere 50 Hz, 10 KA, ‘C’ series complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth lead 4 mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed. NOTE: - ON TESTING AFTER COMPLETION OF JOB, IF DESIRED EARTH RESISTANCE (i.e. LESS THAN ONE OHM) IS NOT OBTAINED, THE EARTHING SHALL BE REDONE BY THE CONTRACTOR WITHOUT ANY EXTRA COST TO GOVT.

Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked, 35 Sqmm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed.

S & F of LED type street light fitting, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP-66 with high power LEDs and unique peanut lens to ensure uniform light distribution complete with all accessories pre-wired as per Cat. Part No. BRP062 LED 65 CW SLA S1 PSU (SmartBright Street) of Philips or ENDURACITYLINERNEOSL70WLED757PASYBOTG (ENDURA CITYLINER NEO) of Havells or LR02-671-XXX-57-G2 (Skyline) of Wipro complete all as specified and directed.

S & F of street light bracket made of 32/40 mm bore GI pipe light grade not less than 1.20 metre long, bend to suitable shape for fixing of street light with and including all necessary fixing arrangements like nut-bolts, washers, clamps etc. as per site requirement complete all as specified and directed.

S & F of high mast LED aviation obstruction light fitting having 302 red LEDs, intensity more than 40 cd, optical lens for 360 degree illumination, operating voltage 80 to 280 volts, IP-65 protection, conforming to ICAO / FAA standards, in built ON / OFF photocell complete as per Cat. Part No. BGAV 302 LED of Bajaj or having same / superior specifications in Philips or Wipro as approved by GE in writing complete all as specified and directed.

Supply and fixing of 1100 volts grade three single core 1.50 Sqmm size each, flexible multi-stranded copper conductor cable, PVC insulated and overall PVC sheathed round flexible connection wire as in electric connections complete all as specified and directed.

M & L for making horizontal bore by mechanical Boring under Taxi track, hard standing, pavements or roads for insertion of GI pipes 50 to 80 mm bore and making good the disturbed surface complete all as specified and as directed.

S & F of 50 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable laid in trenches or fixed to pole or other vertical surface or for insertion in horizental boring complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation, trenches for laying of water tubing or cables etc. and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for laying of course sand free from sharp materials as in filling in trenches for cable protection, laid to a uniform thickness of 23 cm (15 cm under the cable and 8 cm over the cable) and gently punned down to 18 cm thickness as required complete all as specified and directed.

M & L for laying brick as in protection covers over cables using well brunt sub class 'B' old size bricks in trenches over sand cushioning complete all as specified and directed.

Supply, installation, commissioning and testing of 1.50 TR capacity split type air conditioner, hi wall, copper wounded, BEE 5 star rating, inverter type (DC inverter type) (hot and cool type) R-410A, CFC free split AC with indoor and outdoor units and cordless remote control unit complete all as specified and directed. NOTE: - Power cable between indoor and outdoor unit shall be deemed to be included in quoted rates. Copper piping and drain pipe shall be measured and paid seperately under respective items of this schedule.

Supply, installation, commissioning and testing of window type air conditioner electric driven (single phase), cooling capacity 4500 K Cal per hour capacity 1.5 Ton BEE 5 star rated complete with cordless remote control unit including chase cutting and making opening in window / wall for fixing of air conditioner complete all as specified & directed. NOTE: - Fixing of window type air conditioner including complete packing with thermocol such that there would be no opening outside the air conditioner frame body shall be deemed to be included in quoted rates.

Supply and fixing of 5 KVA capacity copper wounded voltage stabilizer for automatic operation, single phase naturally air cooled, indoor type designed for input voltage of 90 to 250 Volt with stabilized output voltage at 230 Volts with accuracy of + 2.5% complete all as specified and directed.

S & F of copper tubing pair of two pipe for suction and discharge, size of suction pipe 1/2" and discharge pipe 1/4" diameter, 0.8 mm wall thick complete with separate nythyle vinil insulation 9 mm thick including chase cutting wall and making good of existing surface as required on site complete all as specified and directed.

Supply and fixing of wall / floor mounting type powder coated stand suitable for mounting of out door unit of Split AC as per manufactur's recommendations complete all as specified and directed.

S & F of 25 mm dia unplasticised PVC pipes of appropriate pressure rating, fixed to walls, ceilings or laid in floors including chase cutting on wall and making good as per existing complete all as specified and directed.

S & F of sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one No. single pole MCB 25 Ampere capacity 240 Volts as per Cat. Part No. 607841 of Legrand or CSDBPSSPN020 of C&S complete all as specified and directed.

S.K.Enterprises

Ikrar khan & co.

Zaigham Enterprises

S.M. KAZIM