Service contract for renovation of electrical wiring and supply fixing and installation of different luminaries fans and exhaust fans of Canteen Building under EM OPH dept

Amount

Renovation of electrical wiring

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light /fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish(On Board)

Supply & Fixing 240 V, 6 A, 5 pin Modular type plug socket(2 pieces) (Brand approved by EIC) with 6A Modular type switch(2 pieces), without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Cutting Channel of size 43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles a)25 mm dia 3 mm thick polythene pipe without earth continuity wire

Supply and fixing 6-way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supply and fixing of double door Vertical TPN MCBDistribution board for MCCB incomer with IP-42/43protection, on angle iron frame on wall & mending good the damages tooriginal finish incl. Inter connection with suitable size of copper wireand neutral link & provision for earthing attachment.(Make - L&T / Legrand/ABB )4-Way VTPN Double Door DB-MCCB Incomer ( Up to 160 A )

Supply and fixing double door 2+12 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supply & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20A DP RCCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.

Supply and fixing 240/415 V 63A F.P MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [Make- Legrand ]

Supply and fixing 240/415 V 40/32A DP MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make- Legrand ]

Supply and fixing 240/415 V 6-32A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections

Supply and fixing of 415 V Four Pole MCCB in existing Vertical DBs including necessary connection as per GS. ( Make - L&T / Legrand/ABB) 100 A FP MCCB (Breaking capacity-25KA/35KA)

Supply and fixing 240/415 V 63A T.P. MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [Make- Legrand ]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2x22/0.3(1.5 sqmm)+1x22/0.3(1.5 sqmm)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2x36/0.3(2.5 SQMM)+1x22/0.3(1.5SQMM) as ECC ( power plug)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2x36/0.3(6.0 SQMM)+1x22/0.3(1.5SQMM) as ECC ( power plug)

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling

Supply & Fixing 9-10W LED Bulb

Fixing of 1200mm sweep ceiling fans complete with all accessories.

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supply & fixing compression type cable gland complete with brass gland,ring &rubber ring for dust & moisture proof entry of al/xlpe insulated armoured cable for 4cx 35 sq mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials for 4cx35 sq mm

Finishing the end of cupper PVC wire by crimping method including providing of cupper socket as per direction of EIC.2.5 sq mm copper socket

Finishing the end of cupper PVC wire by crimping method including providing of cupper socket as per direction of EIC.6.0 sq mm copper socket

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Dismantling of Old damaged wiring materials from entire canteen area & Return to site store.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 20 mm x 3 mm on wall as per GS.

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works,100X100X65

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works,100X150X65

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works,200X150X65

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required,100X100X65

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required,100X150X65

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required,200X150X65

Supply of Delivery Sleek Surface 18W LED light for general indoor lighting.(Make-Philips)

Supply of Delivery 2'x2' 36W LED light for general indoor lighting.(Make-Philips)

Supply Of delivery of 230V, double LED tube light fittings incl. all acc. (Make: Philips cat no.- TMC 502 P 2xT-LED 22W P3242 incl 2no. 18W master LED tube 2100 lm PC body

Supply of Delivery PRO GLOW NEXT 264 LED PROFILE STRIP CW LIGHT. (Make-Philips.)

Sypply & Fixing Aluminium Channel Diffuser.

Supply & Fixing 48'' Ceiling Fan (Make-CGL)

Supply & Delivery of 300mm (12'') Heavy duty AC exhaust fan.230V

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Fixing only louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For 30 cm (12") Exhaust fan

RASH ELECTRICAL WORKS (BID ID -6658511)

Spekon Enterprises (BID ID -6719932)