annual maintenance temple at Tirumala for 2026-27

Supply of best river sand for mortar and stacking to department gauge for pre- measurements including cost and conveyance of all materials , incidenal charges etc., complete as directed during execution.

Supply of bricks 2nd class or ground Moulded ( Non Modular or Traditional size) of 230 x 110 x 70 mm including cost and conveyance of all materials as directed during execution etc., complete.

Supply of cement including cost and conveyance etc., complete

Supply of Two Parts system of Epoxy Bonding adhesive Conforming to ASTM-C 881

Supply of High strength non-shrink cementitious micro concret

Supply of Welding elctordes M.S

Supply of welding electrode 4 mm dia x 450 mm ( stainless steel )

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead. Brick work

Demolishing and disposal of unserviceable materials within 100 metres lead . Unreinforced cement concrete up to 15cm thickness

Supply of coir puri of best quality including cost and conveyance, all incidental charges etc,. Complete as directed during execution.

Supply of Cotton ropes of all dia of best quality including cost and conveyance, all incidental charges etc,. Complete as directed during execution.

Filling of foundations and basement with best river sand in layers of not more than 15 cms.thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Plain Cement Concrete (1:4:8) using 40mm (0.54 cum) and 20mm (0.27 cum) and 12mm (0.09 cum) HBG crushed metal from approved quarry for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete.

Plain Cement Concrete (1:2.5:5) -Grade M15 using 20mm (0.54 cum) and 12mm (0.36 cum) HBG crushed metal from approved quarry for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete.

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

- do- in C.M( 1:3) 12mm thick

- do- in C.M( 1:5) 12mm thick

- do- in C.M( 1:5) 20mm thick

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh, including cost of all materials and conveyance of all materials etc., complete as directed during execution.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Flooring with high polished granite 18 to 20mm thick slabs up to 8'-00" (2.43mts) (telephone black granite) over base coat of CM (1:8)20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seignorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

Flooring with high polished granite 18 to 20mm thick slabs up to 8'-00" (2.43mts) (Galaxy granite 18-20 mm thick up to 8'-00 (2.43m) (premium quality) over base coat of CM (1:8)20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seignorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

Finishing the side of walls with high polished Granite 18 to 20mm thick slabs up to 8'-00 (2.43M) (Galaxy granite 18-20mm thick upto 8'-00 (2.43mm) (Premium colour) set over base coat including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M (1:3) 12mm thick & cement slurry of 33 kgs/ 10 Sqm shall be used for fixing wall granite inlcuding cost and conveyance of all materials, curing, incidental charges etc., complete ( No separate plastering shall be paid to the walls ). in all floors.

CUT STONE FLOORING 4" THICK : Supply and dressing with hard granite stone slabs for flooring from Mulbhagal quarry including cost and converyance etc., complete with the following specifications. a) The size of the stone slab should not be less than 0.61mx 0.45m (2'-0"x1'-6"). b) The thickness of the stone slabs should not be less than 100mm ( 4") in all sides. c) The top of the slab should be dressed with the following dressings properly. d) All the sides of the slabs should be dressed with following dressing to a depth of 40mm (11/2") from top surface to suit proper alignment and jointing with side slabs. e) The slabs should be laid horizontally and jointed properly to alignment over sand bed (excluding cost of sand bed).cement mortar bed. f) The joint of the slab should not be more than 6mm (1/4" thick). g) The slabs should be jointed with C.M(1:3) and the mortar should not come over the slab for the above item the rate is including cost and conveyance of all materials to site of work including necessary labour charges, dressing, laying, jointing but excluding cost of sand for bed, the bed will be paid under relevent item. (Cement mortar of 0.005 Cum/ Sqm should be used for joints). -- with Three line dressing

Supply and laying of Cement Mortar (1:5) including cost and conveyance of all materials etc complte as directed during the execution of the work.

Removing the existing cut stone flooring carefully without damage. The stone should be conveyed and stacked as specified by the department as directed during execution. The rate is including labour charges for removing the slab carefully without damage, loading lifting stacking at site etc., complete as directed during execution.

Labour charges for re-laying the cut stone flooring as directed during execution, the rate is including lifting the cut stone slabs from store yard and unloading the same at work site carefully without damage etc., complete. The slabs should be jointed with CM ( 1:2 ). The joint should not be more than 6mm thick and the mortar should not come over the stone. The slabs should be laid jointed to proper alignment as directed during execution.

Supply, fixing and Painting of MS tubes & Pipes of all diametres as per IS-1161 inlcuding cost and conveyance etrc complete as directed during the execution of the work. Including Labour charges for fabricating steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges including cost of fixing in position. including painting the grills with two coats over a primary coat (total three coats) with synthetic enamel paint of approved make and colour etc., complete

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of M.S. Tubes & pipes of all diametres as per IS-1161. (TATA/ SAIL/ VSP/ JINDAL shall be used)

Supply of Angles , channels etc., complete as directed during execution.

Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of Best Teak wood scantlings up to 2 mts.

Supply of Best Teak wood planks any thickness

Labour charges for wrought and putup for wood scantlings.

Labour charges for wrought and put up including fixing in position frames, shutters for doors, windows, ventilators etc., complete. - do - Fully panelled doors external or internal.

Supply of PLY WOOD-IS Moisture Resistant (MR) Grade

-do- 9 ply- 12 mm thick plywood

-do-9 ply- 18 mm thick plywood

Supply of Brass Aldrop (IS:2681) 350 mm long

Supply of Brass Tower Bolt-10 mm Bolt (IS:204) 300 mm Long

Supply of Anodised Alluminium tower bolts 10mm dia 150mm long with ISI Mark IS 204 ".

Supply of Brass fancy handles 300 mm

Supply of Anodised Alluminium Door handles IS 208 - 125 mm long.

Supply of Heavy Duty Alluminium Door stopper.

Supply of Brass Butt hinges (IS:205)- 150 mm Long

Supply of Anodised Aluminium Butt hinges IS 205-125 mm long

Supply of Putty for wood work.

supply of Turpentine.

Supply of Country Nails.

Supply of French polish.

Supply of Fevical / wood adhesive compound.

Supply of ready mixed Synthetic Enamel paints in all shades Gr- I having VOC (volatile organic compound) content less than 50 grams / lit.

Supply of Bolts & Nuts

Supply and fixing of sun control film for glazed windows, partitions including labour.

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-2: for width of doors 701 to 850 mm).

Providing Unplasticized PVC SWR Rain water downfall pipes 110 mm dia PVC pipe with wooden block of size 150mmx50mmx50mm with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Supply of 304 grade Stain less steel fly proof wire mesh of 26 gauge

Labours required for various miscellaneous works as and arise during the execution of the work.

Mason/Carpenter/Painter/ Stone cutter 2nd class.

Welder 2nd class.

Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminium glazed partitions using 10MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5.00 mm thick plain glass to full height. Using with LAM to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.

Hire charges for engaging tractor for shifting of department materials to the specified places as directed during execution.

Hire charges for engaging welding set making welding to the specified places as and when required by the department.

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

-do- Single coat for old work

Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

-do- Single coat for old work

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Conveyance of the excavated earth from work spot with lead of 2.00 km including loading and unloading etc complete.

Vinyl Flooring Sheets or tiles having a nominal total thickness of 1.5 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards

Hire charges of the core cutting machine, fuel charges etc as directed during the execution of the work

Supply of G.I wire 16 Gauge for tying of the chain links and grills, gates etc.

SPECIALISED ACRYLIC CEMENTITIOUS ELASTOMERIC WATERPROOF COATING TREATMENT Complies with ASTM C 297 : Providing and Application of two coats of Acrylic cementitious elastomeric waterproof coating with - ROOFCOAT (Armstrong) POWER n COAT (EBT)/ BRUSHBOND (Fosroc )ZORICOAT (PMCC)/SIKA TOPSEAL 107 (Sika) /WATERSHIELD COAT PC like high elastomeric acrylic polymer modified cementiitious waterproof system WHERVER HIGH FLEXIBLE HIGH BONDED NECESSARY FOR WATERPROOFING OF TERRACE / SLOPED ROOFS / ACC SHEETS etc., FOR A GUARANTEE OF 5 YEARS REFER THE RATES FOR CLEANING AND CRACK FILLING UNDER THE HEAD OF THE WORKS

Pointing with lead including cost of lead labour charges for cleaning the joints with Iron brushes coastic soda surf etc., and to dry with 6 blowers of the bed joint width 8 to 10mm and a depth of 12mm to 15mm. The cost including required materials like Gas for melting the Lead, cleaning Soda, Stove, Blowers, Hammers , Wire brushes, cleaning brushes, other required tools & plants and Skilled /un-Skilled labour charges for Cleaning the grooves, Pointing with lead and finishing works etc., complete as directed during execution.

Supply of Brass name plate of different sizes of 20 guage brass sheet in different languages as directed during execution including weather proof of Brass plates on both sides including Art work as required for the lettering/Figuring etc., complete.

Rupees Fifty Eight Lakh(s) Eighty Eight Thousand Nineteen And Paise Seventy Eight Only