REPAIR/REPLACEMENT TO FLOOR, JOINERY, WALLS, TILES, SANITARY/WATER SUPPLY FITTING AND ALLIED REPAIR WKS IN ZONE V AND ZONE VI UNDER THE AREA OF AGE B/R-I AT GE (W) BAREILLY

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but n.exc 4.0 sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing to stores complete all as specified and directed.

M & L brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar including demolition of existing defective brickwork complete all specified and directed.

Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47x47mm (19 gauge) all as specified and directed.

S & F factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides & as gap insert for top- rail and bottom rails. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with mitred beads for securing glass, gauze etc as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O 0r Fe 310-O complete all as specified and directed.

M & L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) for embedding of holdfast complete all as specified and directed.

S & F 0.56 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings of door shutter complete all as specified and directed.

S & F 150 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed.

S & F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled stainless steel Butt hinges with steel screwscomplete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges with screws complete all as specified and directed.

S & F 300 mm long ordinary rat tail pattern springs including roller and roller plate complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed.

S & F of mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed.

S & F 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S & F tinted Sheet glass 4.80 mm thick, and glazing with glazing clips in aluminium frame not exceeding 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from aluminium frames complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F galvanized mild steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

S & F in repair of 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J or L hook including dismantling of existing roofing complete all as specified and directed.

S & F in repairs 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, vally gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed

Supply and fix powder coated (minimum 50 micron) aluminium frame for doors, windows with one or more rebates including joining cleat for fixing etc.complete all as specified.

S & F powder coated (minimum 50 micron) Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed, comprising of (aluminium anodised section and aluminium anodised fitting as following :- a) Rails (Top & Bottom) of section- 114.30 x 44.45 x 1.49 mm thick b) Lock rail of section- 83.50 x 44.45 x 1.70 mm thick c) Stiles of section- 85 X 44.45mm X 1.40mm thick (Note: Builders hardware shall be measured and paid seperately as supply only. Cost for fixing is deemed to be included in rates quoted for joinery)

S & F aluminium powder coated three track sliding window Jindal section series-A (15mm) comprising of two Nos of 4.8mm thick tinted glass shutter and one number of stainless steel wire gauge shutter including necessary jointing cleat, glazing clip, rubber packing, locking arrangement, aluminium beading, screws, aluminium fittings. Sections are as under :- (a) Shutter for window comprising rails of size 40 x 18 x 1.29 mm thick. (b) Frame bottom as per Jindal section - 20671 wt @ 0.699 Kg/RM. (c) Frame top and sides as per Jindal section -20672 wt @ 0.594 Kg/RM including making good of wall surface to match the existing surface complete all as specified and directed.

S & F in repairs anodised designer grill of 5.5 mm dia and aperture of 75mm fixed with and including aluminium flat section of size 50 x 1.5 mm complete all as specified and directed.

Repairing of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down & refixing (if required) for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring or hydraulic door closer, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed by Engr-in-charge.

S & F in repairs Aluminium body (die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg complete all as directed.

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/suppoting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling any type complete all as specified and directed.

M & L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid on floor surface jointed and pointed with coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 for including dismentling existing tiles with bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for coloured printed glazed ceramic tiles 7 to 8 mm thick on walls dado/skirting (square/ rectangular) of 300x200 mm jointed and pointed with coloured cement over and including 10 mm thick screed bed in cement mortar 1:4 for including dismantling existing tiles with bedding complete all as specified and as directedby Engineer-in-Charge.

M & L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15mm thick screed bed in cm 1:6 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge.

M & L for Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick rendering in CM 1:4 including dismentling existing tiles complete all as specified and as directed by Engineer-in-Charge.

M & L in patches for 15 to 17 mm thick pre polished Udaipur green stone slab on floor or in platform set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed in CM 1:6 and moulding edges on platform including dismentling existing tiles/stone work with bedding complete all as specified and as directed by Engineer-in-Charge.

M & L in patches for 15 to 17 mm thick pre polished Udaipur green stone slab on wall/ vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick rendering in CM 1:4 including dismentling existing stone work with bedding complete all as specified and as directed by Engineer-in-Charge.

M & L for 10mm thick granite tiles stone for wall or vertical surface and the like machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick rendering in CM 1:4 including dismantling of old tile/stone work including cement mortar bedding complete all as specified and directed.

M & L for Granite (black or coloured) stone for wall or vertical surface and the like 16-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick rendering in CM 1:4 including dismantling of old tile/stone work including cement mortar bedding complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 including taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 including taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M & L for rendering 5 mm thick rendering in CM 1:3 on ceiling finished even and fair including taking down old plaster scrubbing down with water etc complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preperation of new wall surfaces and applying two coats of distemper oil emulsion over a coat of primer after applying Birla / JK wall care putty complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls complete all as specified and directed.

M & L for preparation of newly plastered surface of walls and apply one or more coat of wall care putty to obtain smooth regular/even finish using sand paper and than applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed by Engineer in Charge.

M & L for preparing old decorated wall surfaces and applying a coat of distemper oil emulsion complete all as specified and directed.

M & L for 75 mm thick cement concrete, type C 2, 1:3:6 (using 20 mm graded granite stone aggregate) as in flooring/plinth including demolition of old concrete in floor complete all as specified and directed.

S & F rubber moulded coloured chequered cement concrete tiles 30 cm x 30 cm x 20 mm thick over and including 15mm thick rendering in CM 1:6 set and jointed in neat cement slurry and pointed in white cement slurry with pigment including demolition of old existing stone slab of any description or thickness in floor, aprons etc complete all as specified and directed.

S & F in replacement 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in replacement 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repair fancy type pillar tap of PTMT any colour screwed for iron pipe and fixed complete all as specified or as directed.

S & F in repairs Vitreous China Ware Wash hand basin coloured, flat back, size 550x400mm including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of CI cantilever bracket of appropriate size complete all as specified and directed.

S & F in repairs 15 mm bore fancy type chromium plated bib taps brass with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair bib tap fancy type of PTMT any colour screwed, for iron pipe and fixed complete all as specified or as directed..

S & F in repairs 15 mm bore fancy type chromium plated bib taps brass knee operated butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F in repairs Vitreous China EWC Pedastal pattern white, including mild steel chromium plated or aluminised hinging device seat cover white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed.

S & F in repair of plastic water closet seat, black, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 630x450 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed.

S & F in repairs PVC connection for 15mm size pipe 450 mm long with PTMT nuts complete all as specified and directed.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

S & F in repair angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed complete all as directed.

S & F in repairs spray jet stainless steel chromium plated for EWC complete all as specified and directed.

S & F in repairs health faucet brass chromium plated complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S & F in repairs Chromium plated grating 125 mm dia circular of approved make and fixing with white cement / cement mortar 1:3 on Nahani trap or floor trap complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Fancy type brass chromium plated with long shank and cup (concealed type) 15mm bore stop valves screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F 500 Ltr Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tank exc 250 ltr but n.exc 500 ltr capacity all as specified and directed.

S & F Ball valves 15 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed.

M & L for grinding, polishing including cleaning previously polished surface of kota stone, udaipur green or granite stone of any type to obtain mirror polished surface by using two or more times grinding and bees-wax or otheRMaterial of any description of any width or girth including cleaning and preparation the surface complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints laid in floors or trenches including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F 200 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F in repair 200 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 4" x 2.5" bore PVC (SWR) multi floor trap complete all as specified and directed.

Notes :

novell engineers

REHAN CONSTRUCTION

Mohit Enterprises

JAI SRI RAM ASSOCIATE

M/S Alam Construction Co

hardeep singh enterprises

SHRI BALA JI STORE

Shikhar ji Enterprises

M/S SATISH KUMAR JAIN