CERTAIN REPAIRS TO OTM ACCN OF 906 FD REGT, 14 FD REGT, 14 DOU, AMN DUMP AREA AND SECTION HOSPITAL AREA UNDER GE CLEMENT TOWN, DEHRADUN

Amount

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as item No. 1 above but exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and removing from site complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in framed work complete all as specified and directed.

S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F 30mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L 30mm thick IInd class hardwood glazed and skeleton shutters with three panels, open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm ivory colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded ivory colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of ivory colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and 5mm thick x 15mm wide PVC sheet beadings used inside stiles and rails and decorative PVC beading of 10mm x 10mm used instead of exposed portion of PVC sheet beading and suppling & fixing in the frame at site as per specification & drawing.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane complete all as specified and directed.

S&F mild steel framed work as in door,chowkat,grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 complete all as specified and directed.

S/F 100 mm long mild steel butt hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 150mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 100mm long complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair MS helical door spring 300mm long including roller and roller plate complete all as specified and directed.

S & F in repair for stainless steel, 25 mm dia and 1.2 mm thick curtain rod with and including fixing SS brackets and decorative type brass knobs both side of each rod , complete all as specified and directed. Note : (Measurement will be taken between end points of Knobs.)

S&F in repair Aluminium extreded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S/F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainlesss , steel ocver, governing picot made of brass other parts made of mild steel heavy duty in repairs complete all as specified and directed.

S&F 16 to 18mm MDF DWR Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including matching bedding/lamination to exposed surfaces complete all as specified and directed.

S&F in repair 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed.

S&F Ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F for Auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, Sliding/side hung type with sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable peg stays,hinges and handles-02Nos etc with 4mm thick tinted/frosted glass ordinary quality as per manufactures instruction complete all as specified and directed.

S&F powder coated anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats,glazing clips rubber packing handle 2 Nos in each door, hinges, Mortice lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc with 5.5 mm thick tinted glass ordinary quality as per manufactures instruction complete all as specified and directed.

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 grade E-165 complete all as specified and directed.

Dismantling AC (corrugated or semi corrugated) sheets/ galvalume sheet in roof covering including ridge of any description complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards including cover fillets of any descrition complete all as specified and directed.

M & L 4mm thick Non asbestos fibre cement building boards fixed or laid Aluminium framework with screws for ceiling complete all as specified and directed.

S & F anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Removal of existing roof treatment i.e APP membrane, brick tiling incl mud mortar and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any other loose material complete all as specified and directed. Note :- The work is required to be carried out at non-accessible roof for any storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3 .6Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance Note : 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor 2. The work is required to be carried out at non-accessible roof slab for double storeyed. The contractor shall make arrangement of scaffolding, safety and security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items.)

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free Non skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for joint free Non skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in vertical surface such as dado/ skirting etc over and including 10mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L dura stone tiles approved make of size 300x300x8mm thick as in floor over and including 15mm thick screed bed in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for joint free Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles of any design and pattern, 450x300 x 7 to 8 mm thick, as in dado etc incl 10 mm thick rendering in CM 1:4, Set and jointed in neat cement slurry and pointed in white of coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B III with average water absorption between 10% to 15%. Length, width and straightness of sides + 0.20% (Max deviation). Thickness + 4.0% (Max deviation). Straightness of sides and Rectangularity +0.15% (Max Deviation). surface flatness + 0.22% (Max deviation). Breaking strength 500 N (Minimum) and minimum 95% tiles shall be free from visible defects complete all as specified and directed.. Note: Shade of the tiles including Colour, design and pattern shall be got approved by GE.

M&L coloured vitrified tiles of any design and pattern,600x600x9 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles.Tiles shall be conforming to IS-15622:2017,Group B1b with average water absorption between 0.08% to 3% length,width and straightness of sides +0.10 % (Max deviation ).Thickness +4.0% (Max deviation).Centre and edge curvature and warpage +0.20 % (Max deviation).Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. Note:- Shade of tiles including colour,design and pattern shall be approved by GE.

M&L coloured vitrified tiles of any design and pattern,600x600x9 to 10mm thick as in vertical surfaces/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles.Tiles shall be conforming to IS-15622:2017,Group B1b with average water absorption between 0.08% to 3% length,width and straightness of sides +0.10 % (Max deviation ).Thickness +4.0% (Max deviation).Centre and edge curvature and warpage +0.20 % (Max deviation).Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects and including 10 mm thick rendering in Cement mortar (1:4) in vertical surface , set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. Note:- Shade of tiles including colour,design and pattern shall be approved by GE.

M & L for 18 to 20 mm thick machine cut pre polished kota stone slab as in flooring/tread in full length in single peace without joint, with groove cutting in double line of stair width of stair case over and incl 15 MM thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing incl full round bull nosing complete all as specified and directed.

M & L for 18 to 20 mm thick machine cut pre polished kota stone slab as in riser of steps, skirting in full length in single peace without joint, of stair width laid over and incl 10 mm thick cement screed of CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing (mirror finish) and bullnosing,including taking down cement plaster on brick or concrete surfaces complete all as specified and directed.

M & L 18 to 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for 18 to 20mm thick marble any colour (Udaipur green marble) (table rubbed and polished) insteps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) laid in panels as in flooring including finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded crushed stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering cement mortar (1:4) mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. (WPC shall be paid seperately)

M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre , top layer 15mm cement plaster 1:1/2:2 (1 cement :1/2 coarse sand :2 stone chippling 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing , the top layer with brushes and water to expose the stone chipping complete all as specified and directed. (payment for providing grooves shall be made seperately

Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as specified and directed.

M&L for three coats of white wash to newly plastered surfaces of wall including preparation of surfaces, complete all as specified and directed.

M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of wall putty to newly plastered surface including preparation of surfaces complete all as specified and directed.

M&L for preapration newly plastered or concrete surfaces of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of surface plastered or unplastered by washing down and scrapping old distempered surface and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

All as per item No-72 above but two coats of oil bound distemper on wall surfaces complete all as specified and directed.

M&L for preapration of old plastered or unplastered surafces with complete removal of existing treatment of walls, concrete tiles, kerb stone and the like and applying one coat of cement base paint complete all as specified and directed.

M&L Preparation old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preapration of old plastered or unplastered surafces with complete removal of existing treatment of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed.

M&L for preparing old steel and iron surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old wooden or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

Jain Engineering Works

SWASTIKA BUILDERS

Nanda Brothers