Construction of Garden devlopement at T.P.48 (Bhestan),F.P.77,South Zone-A (Udhna).

Name of Work :- Construction of Garden devlopement at T.P.48 (Bhestan),F.P.77,South Zone-A (Udhna).

SMC-SOR:2023-24

Description Qty. Rate Unit Amount

PART - I (CIVIL WORKS )

Excavation for foundation including sorting out and stacking

of useful materials and disposing of the excavated stuff up

to 50 mt. lead and all lift, watering etc. complete.

(A) Loose or soft soil with manual labour

(1) Upto 1.5 Mt. Depth 96.00 117.26 C. M.

SMC SOR 23-24, ITEM NO.-

Boring holes 2.5 mt. deep in ordinary soil (for cast in situ

2 piles) and disposal of surplus excavated soil as directed

within a lead of 50 mt. for following diameter of piles.

SMC SOR 23-24, COMPUND WALL & OTHER MISC ITEM NO.-

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

3 Crushed stone agg 20m.m Nominal size)&curing comp. excl. 19.00 3005.76 C. M.

cost of form work in :(a) foundation & Plinth

SMC SOR 23-24, ITEM NO.-

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size) & curing

comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in :

(a) Foundation, footing,base of columns & mass concrete. 25.00 4146.15 C. M.

SMC SOR 23-24, ITEM NO.-

Providing and laying ordinary cement concrete 1:1.5:3

( 1 cement, 1.5 sand, 3 graded stone aggregates 20 mm

5 nominal size ) finishing smooth curing etc. complete

including cost of form work but excluding cost of

reinforcement for reinforced concrete work (R.C.C.) in :

(1) Having cross section area upto 0.08 sq.mt Ground Floor

(2) Having cross section area more than 0.08 sq.mt and upto

(1) Having cross section area upto 0.08 sq.mt 20.00 9102.61 C. M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m 0.00 8174.41 C. M. -

(3) Having cross section area more than 0.12 sq.mt. 0.00 7086.88 C. M. -

SMC SOR 23-24, ITEM NO.-

Providing and laying cement concrete 1:3:6 (1 cement :

coarse sand : 6 crushed stone aggregates 20mm nominal

size) and curing complete including cost of form work etc.

complete in wall caps/ copings.

SMC SOR 23-24, ITEM NO.-97

Description Qty. Rate Unit Amount

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

7 reinforcement for R.C.C. work incl. bending, binding & 10174.00 76.21 Kg

placing in position etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Filling in trenches with available excavated soil in layers not

8 exceeding 20 cm. in depth consolidating each deposited 102.00 130.39 C. M.

layer by ramming and watering etc. complete.

SMC SOR 23-24, ITEM NO.-

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 70 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. - Ground Floor

SMC SOR 23-24, ITEM NO.-

Providing and applying 20mm. thick sand faced cement

plaster on walls or similar surfaces at all floor levels

consisting of 12 mm. average thick backing coat of cement

mortar 1:3 (1 cement : 3 sand) and 8 mm. thick finishing

coat of cement mortar 1:1 (1 cement : 1 sand) etc.comp

SMC SOR 23-24, ITEM NO.-

Providing 20 mm. deep finished groove in plaster in line and

level etc. complete (M.R.)

SMC SOR 23-24, ITEM NO.- 30(MR)

Providing and applying two coats of weathershield max

paint (3 coats may be required in case of darker colours) of

ICI Dulux or Apex Ultima of Asian paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

12 manufacturers.

Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, funfi, algae and flaking paint. This can be

achieved by brushing with a wire / stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3.

For application on previously painted wall, previous coatings

of paint must be thoroughly scraped off and clean the

Priming:thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. application of putty is not recommended. 1100.00 82.00 S.M.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts and nuts or by screws incl. Priming coat

of Red lead paint etc.comp. (A) Plain grill For all Floors

SMC SOR 23-24, ITEM NO.-

Description Qty. Rate Unit Amount

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord

etc. as per Engineer in-charge.TATA / JINDAL / ASIAN Make for

Main entry gate etc.

SMC SOR 23-24, ITEM NO.-132 450.00 126.00 Kg.

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

and scoured with brushed fine steel wool, scrapers and sand

paper with ready mixed priming paint brushing red lead.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Painting one coat (excluding priming coat) on Previously

Painted steel and other metal surface with synthetic enemal

16 paint, burshing to give an even shade including cleaning the 200.00 38.03 S.M.

surface of all dirt, dust and other foreign matters.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Decorative wall paintings with designing,painting at place

with all necessary materials

SMC SOR 23-24, COLOR WORK ITEM NO.-

Providing and fixing hot dip Concertina Coil of 610 mm. dia

made out of 2.59 mm. (12SWG) hot dip galvanized ( G.I.

coating not less than 200 gm / s.m. )th. Wire having 80 nos.

of spies and 200 nos. of clips made out of stainless steel

(AISI 304) 1.5 mm thick. Dia, G.I. Strips 0.5 mm. ht. (G.I

19 coating not less than 120 gm / s.m. ) weight of one coil 315.00 231.00 RMT

should not be less than 15 kg etc. complete, at the top of

compound wall fixed with S.S clips and binding wires

wherever necessary etc. complete. (Note : Stretching lenght

of one coil should not be more than 9 m.)

AS PER SMC APPROVED TENDER CONSTRUCTION OF

COMPOUND WALL AT TP-22, (SARTHANA VALAK) F.P-82,

NEAR FRENCH WELL 1 & 2 at SMC, SURAT

Steel work welded in built up sections,frame work including

20 cutting, hoisting, fixing in position and applying apriming

coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with

connection plats or angle cleats as in main and cross beams,

hip and trussed purlins connected to common raffers and

SMC SOR 23-24, ITEM NO.-98 10.00 9047.86 QUINTAL

TOTAL FOR PART A - COMPOUND WALL

GROUND DEVELOPMENT WORKS

Description Qty. Rate Unit Amount

Clearing and grubbing road land including uprooting rank

vegetation grass bushes,shrubs,sapling and trees girth up to

1 300 mm removal of stumps of trees cut earlier and disposal 0.432 108824.60 Hectare

of unserviceable materials (B) By manual in area of thorny

R&B SOR 23-24, ITEM CODE.- 26117B, ITEM NO.-

Providing & filling in plinth with murum/yellow soil or

2 selected soil (Garden soil) in layers of 20 cm. Th'. Incl. 351.00 289.06 C.M.

watering, ramming & consolidation etc. complete.

SMC SOR 23-24, ITEM NO.-

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.

Excavation for foundation including sorting out and stacking

of useful materials and disposing of the excavated stuff up

to 50 mt. lead and all lift, watering etc. complete.

(A) Loose or soft soil with manual labour

(1) Upto 1.5 Mt. Depth 43.00 117.26 C. M.

SMC SOR 23-24, ITEM NO.-

Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator

5 machine including watering and filling in depressions which 1893.00 4.93 S.M.

occur during the process as directed by engineer in charge

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing & laying Granular sub base (GSB) confirming to

Grading-II of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and

6 laid with mechanical means spreading with motor grader 284.00 1418.04 C.M.

and compacting with vibratory roller having minimum 80-

100 KN static weight to achieve desired density of 98% of

MDD including all material, labour, machinery with all leads

and lift etc. complete.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size)&curing comp. excl.

cost of form work in :(a) foundation & Plinth

SMC SOR 23-24, ITEM NO.-

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

8 reinforcement for R.C.C. work incl. bending, binding & 8160.00 76.21 Kg

placing in position etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Supplying & filling fine sand(pana) in 75 mm/100 mm/150

mm compacted thickness over the base including necessary

9 compaction, watering etc. complete. Item includes leveling 142.00 413.09 C. M.

by using vibratory plates compacted machine and as

directed by engineer in charge.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Description Qty. Rate Unit Amount

Providing interlocking type Rubber moulded cement

concrete paver block of approved shape, design & colour

having 60mm thickness (M-35) purchased from SMC's

10 approved paverblock manufacturer only & fixing of fine

sand bedding. Item includes levelling by using vibratory

plates compacted machine. Item also includes all materials,

labour, equipments, tools, plants, watering, cleaning etc.

with color 946.50 524.00 S.M.

without color 946.50 524.00 S.M.

SMC SOR 15-16, GROUND DEVELOPMENT WORK ITEM NO.-

Providing and fixing precast Concrete GRASS PAVER block

60mm thick with grade of concrete M250 pnumatic

11 compressed by Mechanically pressed and as per 50.00 1081.00 S.M.

approved design including filling the joint with sand in

proper line & level etc.

RA-2-GRASS PAVER

Providing 100mm thick readymade c.c kerb of strength M-20

(size 300 mm x 380 mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

12 vertical position, including filling joints in C.M. 1:1 (1 part of 290.00 228.00 R.M.

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement :1 part of coarse sand) including watering

etc. complete and as directed by Engineer in charge.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.-

Providing and fixing in position Readymade vaccume wet

press kerb block (Height 450 x Width 600 x Thickness 125)

with all labour and material charges asper instruction of

Engineer in charge.

Rate from RAC (S.M.C.)

Supplying & filling white sand compacted thickness over the

base including necessary compaction, watering etc.

14 complete. Item includes levelling by using vibratory plates 47.00 413.09 C.M.

compacted machine and as directed by Engineer in charge.

SMC SOR 23-24, GROUND DEVELOPMENT WORK ITEM NO.

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts and nuts or by screws incl. Priming coat

of Red lead paint etc.comp. (A) Plain grill For all Floors

SMC SOR 23-24, ITEM NO.-

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Description Qty. Rate Unit Amount

Providing and Supplying ISI standard R.C.C. pipes (of

Sulphate Resisting Cement) in standard lengths of following

class and diameter suitable for either collar joints or rubber

ring joints including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading,

17 unloading, conveyance to department stores, stacking etc.

complete.(IS 458 / 1989 ) Note : One collar should be

supplied with each full length plain ended RCC pipe, cost

included in rates below. One rubber ring should be supplied

with each full length socketed pipe, cost included in rates

Lowering, laying and jointing RCC pipes in C.M. 1:1 1/2 of

following diameters in proper position, grade and alignment

at all level as directed by Engineer-in-charge including

conveyance from stores to site of work, labour, giving

hydraulic testing as per ISI code. Class NP3 Test Pressure

DRAINAGE GWSSB SOR 22-23,

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

18 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 0.00 2932.93 No. -

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc. comp.

Inside dimension,455 x 610 mm &450 mm deep for single

(A) Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt beyoung 0.45 mt

TOTAL FOR PART B - GROUND DEVELOPMENT WORKS

GAZZEBO (2 Nos.)

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation upto 1.5m. Depth including sorting out

1 and stacking of useful materials and disposing of the excavated

stuff up to 50 mt. lead.

(A) Loose Or Soft Soil

SMC SOR 23-24, Item no.-1

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

50 Mt. For following diameter of piles. (2) 250 m.m.

SMC SOR 23-24,Item no.-94

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

3 complete including the cost of form work but excluding 46.00 3637.34 C.M.

reinforcement of reinforced concrete work in (A) Foundation and

SMC SOR 23-24,Item no.-95

Description Qty. Rate Unit Amount

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

4 of form work but exclu. Cost of reinforcement for reinforced 4.00 4146.15 C.M.

concrete work in : (A) Foundation, footing, Base of columns and

SMC SOR 23-24,Item no.-6

Providing & laying ordinary cement con.1:1.5:3 (1cement:

1.5sand: 3 graded stone agg. 20 mm nominal size) finishing

5 smooth curing etc. comp. Incld. Cost of form work but excl. Cost

of reinforcement for R.C.C. Work in : Up to G.L./P.L. (A)

(1)Having c/s area up to 0.08 s.mt 1.00 12632.60 C.M.

SMC SOR 23-24,Item no.-7

Providing & laying ordinary cement con.1:1.5:3 (1cement:

1.5sand: 3 graded stone agg. 20 mm nominal size) finishing

6 smooth curing etc. comp. Incld. Cost of form work but excl. Cost

of reinforcement for R.C.C. Work in : Up to G.L./P.L. (B) BEAMS :

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8174.41 C.M.

SMC SOR 21-22,Item no.-7

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

7 including bending, binding and placing in position complete upto 1876.00 76.21 Kg.

floor two level

SMC SOR 21-22,Item no.-8

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. Up to G.L./P.L.

SMC SOR 21-22,Item no.-9

Providing & filling in plinth with murrum/yellow soil or selected

9 soil in layers of 20 cm. Th'. Incl. watering, ramming & 45.00 289.06 C.M.

consolidation etc. complete.

SMC SOR 21-22,Item no.-11

Providing & applying 20mm.th. Sand faced cement plaster on

walls or similar surfaces at all floor levels consisting of 12 mm. Av.

10 th'. Backing coat of C.M. 1:3( 1 cement :3 sand) & 8 mm.th. 67.00 330.88 S.M.

Finishing coat of C.M.1:1 (1 cement: 1 sand)--- Upto G.L./P.L

SMC SOR 21-22,Item no.-12

Providing & Laying green polished kota stone slab flooring at all

floor levels,over 20 mm av.th.base of C.M. 1:6(1cement: 6 sand)

11 laid over&joined with grey cement slurry incl. Rubbing & polishing 80.00 989.45 S.M

etc. comp. (A) 25 mm. (Tolerance +/- 2mm) For all Floor

SMC SOR 21-22,Item no.-32

(B) WORK ABOVE PLINTH LEVEL

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

SMC SOR 21-22,Item no.-16

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished

even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces.

Description Qty. Rate Unit Amount

SMC SOR 21-22,Item no.-25

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished

14 with flush pointing in white or colour cement including rubbing 36.00 2410.00 S.M

and polishing complete. (Basic Rate:- Rs.1590.0/S.M.)

SMC SOR 21-22,Item no.-39

Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

15 Cement : 4 Coarse sand) and finished with flush pointing in white 198.00 2449.00 S.M

or colour cement including rubbing & polishing comp.. (Basic

Rate:- Rs.1590.0/S.M.)

SMC SOR 21-22,Item no.-40

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the

SMC SOR 21-22,Item no.-98

Painting two coats (excluding priming coat) on new steeland

other metal surface with enamel paint, brushing, interior to give

17 an even shade including cleaning the surface an even shade 40.00 65.31 S.M

including cleanicn the surface ofall dirt, dust and other foreign

SMC SOR 23-24,Colour Works, Item no.-8

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint.

18 This can be achieved by brushing with a wire/ stiff coir brush, 134.00 82.00 S.M

followed by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

SMC SOR 23-24,Colour Works, Item no.-17

Description Qty. Rate Unit Amount

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and impet

washer filled with white lead etc. Excluding the cost of purlins

rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR21-22,Item no.-101

TOTAL FOR PART - C (GAZEBO - 2 NOS.)

TOILET,SECURITY CABIN & MAIN GATE

WORK UP TO PLINTH

Excavation for foundation including sorting out and stacking off

1 useful materials and disposing of the excavated stuff up to 50 mt.

lead and all lift, watering etc.comp.

(A) loose or soft soil with machineries

SMC SOR 23-24, PAGE NO 1 IT NO

(SOR SMC 2023-24, Pg No. 1, It No. 4)

Providing and laying ordinary cement concrete work 1:1.5:3 (

cement, 1.5 sand, 3 graded stone aggregates 20 mm nominal size

) & curing comp.including cost of form work but excluding cost of

reinforcement for reinforced concrete work in:

(A) foundation, footing, base of columns and mass concrete 12.00 4146.15 C.M.

(SOR SMC 23-24, It No. 6)

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.08 s.mt 3.00 12,632.60 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 3.00 11,166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9,201.68 C.M. -

(SOR SMC 23,24, It No.

(B) BEAM: (G.B./P.B.)

(1) Having c/s area up to 0.08 s.mt 4.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M. -

(SOR SMC 23,24, It No.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

5 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 2670.00 76.21 KG.

(SOR SMC 2023,24, Pg No. 2, It No. 8)

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. Up to G.L./P.L.

(SOR SMC 2023-24, Pg No. 1, It No. 9)

Filling in trenches with available excavated earth in layer not

7 exceeding 20 cm in depth consolidating each deposited layer by 75.00 130.39 C.M.

ramming & waetring

(SOR SMC 2023-24, Pg No. 1, It No. 10)

Description Qty. Rate Unit Amount

Providing and filling in plinth with murrum/yellow soil or selected

8 soil in layers of 20cm thick including watering, ramming & 27.00 289.06 C.M.

cosolidation etc. complete

(SOR SMC 2023-24, Pg No. 1, It No. 11)

Providing and applying 20mm. thick sand faced cement plaster on

walls or similar surfaces consisting of 12mm. thick backing coat of

c.m. 1:3 ( 1 cement : 3 sand ) and 8mm. thick finishing coat of

c.m. 1:1 ( 1cement : 1 sand ) etc. comp.

(SOR SMC 2023-24, Pg No. 1, It No. 12)

Providing and applying two coats of weathershield max paint (3

coats may be required in case of darker colours) of ICI Dulux or

Apex Ultima of Asian paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, funfi, algae and flaking paint. This can be achieved by

brushing with a wire / stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry

for 4-5 hours. application of putty is not recommended. Minimum 37.00 82.00 S. M.

4-6 hours duration is required between each coat of weather

shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

Providing & Laying green polished kota stone slab flooring at

all floor levels,over 20 mm av.th.base of C.M. 1:6(1cement:

11 6 sand) laid over&joined with grey cement slurry incl. 3.00 989.45 S. M.

Rubbing & polishing etc. comp. (A) 25 mm. thick For all Floor

SMC SOR 23-24, ITEM NO.-

Providing & Laying polished kota stone of machine cut edge

slab 25 mm. th. in riser of steps, tread, dedo & pillars center

piece not less than 1.2 mt.in width &side pieces of equal size

as per design, laid on 10 mm.th. C.M.1:3(1 cement:3 sand)

joined & polishing etc. For all Floor

SMC SOR 23-24,, ITEM NO.-

Total amount upto plinth

Total amount upto plinth

WORK ABOVE PLINTH FOR GROUND FLOOR

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in

(1 )Having c/s area up to 0.08 s.mt

Ground Floor 3.00 12,632.60 C.M.

Description Qty. Rate Unit Amount

First floor 2.00 12,672.24 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt

Ground Floor 0.00 11,166.97 C.M. -

First floor 0.00 11,206.61 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 9,201.68 C.M. -

First floor 0.00 9,241.32 C.M. -

(1 )Having c/s area up to 0.08s.mt -

Ground Floor 6.00 9102.61 C.M.

First floor 3.00 9142.25 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m

Ground Floor 0.00 8174.41 C.M. -

First floor 0.00 8214.05 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 0.00 7086.88 C.M. -

First floor 0.00 7126.52 C.M. -

(1) Slabs having more than 8cm. and upto 10 cm. thickness

Ground Floor 0.00 7,984.42 C.M. -

First floor 0.00 8,024.06 C.M. -

(2)Slabs having more than 10 cm. & upto 13 cm. thickness

Ground Floor 8.00 7,396.96 C.M.

First floor 3.00 7,436.60 C.M.

(3) Slabs having more than 13 cm. Thickness

Ground Floor 0.00 6,813.01 C.M. -

First floor 0.00 6,852.65 C.M. -

Ground Floor 1.00 9,531.24 C.M.

First floor 1.00 9,570.88 C.M.

Ground Floor 3.00 5512.83 C.M.

First floor 3.00 5552.47 C.M.

(SOR SMC 23-24, Pg No. 2,It No. 13)

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

14 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

Ground Floor 2780.00 76.21 KG.

First floor 1550.00 77.21 KG.

(SOR SMC 2023-24, Pg No. 2, It No. 15)

Providing & construction brick work using Fly Ash bricks having

15 crushing strength not less than 70 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp.

Ground Floor 44.00 4,511.97 C.M.

First floor 11.00 4,786.95 C.M.

(SOR SMC 2023-24, Pg No. 2, It No. 16)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/concrete walls similar surfaces for plastering & finished

16 even & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

Ground floor 232.00 189.79 S.M.

First floor 66.00 217.93 S.M.

(B) For ceilings and soffits of stairs

Ground floor 58.00 214.60 S.M.

First floor 0.00 242.74 S.M. -

Description Qty. Rate Unit Amount

(SOR SMC 2023-24, Pg No. 3, It No. 24)

Providing 20 mm thick double coat mala cement plaster on brick /

concrete work for plastering comprising of base coat 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse sand) in

rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

(SOR SMC 2023-24, Pg No. 3, It No. 27)

Providing throating or plaster drip and moulding it to R.C.C.chajja

etc. complete. For all Floor

(SOR SMC 2023-24, Pg No. 3, It No. 29)

Providing 20 mm. deep finished groove in plaster in line and level

etc. complete. For all floor (M.R.)

(SOR SMC 2023-24, Pg No. 3, It No. 30)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

20 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) 49.00 1,040.35 S. M.

finishing with flush pointing in white cement. (Basic Rate-

(SOR SMC 2023-24, Pg No. 4, It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry. (Basic Rate Rs.366.0/S.M.)

(SOR SMC 2023-24, Pg No. 4, It No. 45)

Providing & laying granite slab 18mm thick in Window-Door seal

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

(SOR SMC 2023-24, Pg No. 4, It No. 41)

23 Labour Charges For Edge Finished For Granite 29.00 43.43 R.M.

(SOR SMC 2023-24, Pg No. 4, It No. 42)

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished

with flush pointing in white or colour cement including rubbing

and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

25 Cement : 4 Coarse sand) and finished with flush pointing in white

or colour cement including rubbing & polishing comp.. (Basic

Rate:- Rs.1347.46/S.M.)

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with necessary screws & Anodized aluminum

fixtures & fastenings For all Floor

Same as Above But Without Frame 8.00 2520.00 S. M.

(SOR SMC 2023-24, Pg No. 5, It No. 51 & 52)

Description Qty. Rate Unit Amount

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm

x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

27 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) 0.00 1705.67 S. M. -

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.

(A) Same as above but Colour anodized 11.00 1705.67 S. M.

SMC SOR 23-24, ALUMINIUM WORK ITEM NO.-

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm

(of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal

Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal

section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size

mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt.

Kg/mt) with sliding shutters of horizontal member size 40 mm x

18 mm x 1.29 mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass

fixing to frame as per details etc

(A) Same as above but Colour anodized 0.00 1591.87 S. M. -

SMC SOR 23-24, ALUMINIUM WORK ITEM NO.-

Distempering two coats with oil bound washable distemper of

approved brand& manufacture & of required shade on wall

surface to give an even shade over and & incl. a priming coat of

alkali resistance primer of approved brand after throughly

29 brushing the surface to give an even shade after throughly

brushingthe surface free from mortar droppings and other foreign

matter and also including preparing the surface even and smooth.

(A) For wall 298.00 72.23 S. M.

(B) For ceilings and soffits of stairs 58.00 80.35 S. M.

SMC SOR 23-24, COLOR WORKS, ITEM NO.-

Description Qty. Rate Unit Amount

Providing and applying two coats of weathershield max paint (3

coats may be required in case of darker colours) of ICI Dulux or

Apex Ultima of Asian paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects

and manufacturers.

Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, funfi, algae and flaking paint. This can be achieved by

brushing with a wire / stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement

and sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry

for 4-5 hours. application of putty is not recommended. Minimum 249.00 82.00 S. M.

4-6 hours duration is required between each coat of weather

shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

(1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

31 prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as

directed. (M.R.)

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and

grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before treatment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the

vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing y frp claded (Size : 290 Ø * 12mmthk , Mounting

(c) The 240mmterrace

shall be flooded with

water for a minimum period of two weeks for curing and for

final test. All above operations to be down in order and as

directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

SMC SOR23-24, ITEM NO.-62

Description Qty. Rate Unit Amount

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord

etc. as per Engineer in-charge.TATA / JINDAL / ASIAN Make for

Main entry gate etc.

SMC SOR 23-24, ITEM NO.-132 800.00 126.00 Kg.

Painting two coat (excluding priming coat) on new steel and

othermetal surface with synthetic enemal paint, brushing to give

an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

SMC SOR 23-24, Colour works,ITEM NO.-8

Total amount for Ground floor

Total amount for Ground floor

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

mm size "P'or "S" trap for water closet squatting pan joining

the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap with normal closing

2 seat cover L bend including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT- 5.00 3282.00 No.

SMC SOR 23-24, SANITARY ITEM NO.-

Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making

good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

SMC SOR 23-24, SANITARY ITEM NO.-

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

4 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT13261H

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing 600 mm. x 450mm. mirror of superior

glass at all floor levels, mounted on 6 mm.thick A.C.sheet or

plywood sheet & fixed to wooden plugs with C. P. brass

screws and washers etc. complete. For all floor.

SMC SOR 23-24,WATER SUPPLY AND SANITARY ITEMS,

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal

6 diameter of self cleaning design with C.I. scread down or 2.00 558.36 No.

hinged grating including the cost of cutting and making good

Description Qty. Rate Unit Amount

SMC SOR 23-24,WATER SUPPLY AND SANITARY ITEMS,

Providing and fixing U-P.V.C. pipe (SWR) confirming to I.S.

no.13592 (Type "B") of Prince / Supreme / Jain / Astral /

Tulsi /Finolex make for soil and waste discharge system at all

floor levels including all fixures like bends, tees, shoe etc.

jointed with resin of approved brand and manufacture etc.

complete.(M.R.)

SMC SOR 23-24, WATER SUPPLY AND SANITARY ITEMS,

Prov. & Fixing S.W. Gully trap with C.I.grating brick

masonary (C.M 1:5) chamber & water tight C.I. cover with

frame of 300mmx300mm size (inside) with weight to be not

less than 4.53kg, includ. plastering smooth inside & outside

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps

(A) 100mm x 100mm Size -P type 1.00 1292.19 No.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension, 455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

9 exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 0.00 3155.63 No. -

Sand : 4 Grade stone aggregate 20mm size), Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth 0.1 mt beyoung 0.45 mt. 12.00 222.71 Each

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

10 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 10.00 2932.93 No.

20mm size), Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. on top etc. comp.

Inside dimension 455 x 610 mm & 450 mm deep for single

(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth 0.1 mt beyoung 0.45 mt. 12.00 242.39 Each

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe

11 in C.M.1:1 of following nominal internal diameters including

testing of pipes and joints etc. complete.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Description Qty. Rate Unit Amount

Providing & Fixing P.V.C. pipes (SCH-40) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc.

12 comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including

cost of all materials.(M.R.)

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & Fixing 15 mm Dia bib tap with wall Flange at all

13 floor levels, polished bright etc.comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 5.00 1323.00 No.

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing gun metal check or non return full way

wheel valve at all floor levels. etc. complete.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

KN , CONCEALED BODY ALD-081,HindWare F280052 &

CONCEALED STOP COCK F850105

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing abonite ball cock of approved qualities

directed etc. complete.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

SMC SOR 23-24, SANITARY ITEM NO.-

Providing and fixing C.I. machinehole cover 0.60 mt. x

18 mt. size having weight not less than 35 kg. etc. complete. 2.00 958.17 No.

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex

19 make for rain water at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

Description Qty. Rate Unit Amount

SMC SOR 23-24, WATER SUPPLY & SANITARY ITEM NO.-

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing,centering, vibrating, curing & mixed with

approved water proofing cement compound or "CEMWET"

or "PIDICRETE LW"integral water proofing admixture as

water proofing agent to be mixed with 50 kg. cement bag

shall be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom slab & side

pardi for Under ground Tank & Item incl. Necessary

20 excavation & refilling the available earth, 15 cm th' C.C 1:4:8

for bedding concrete, Half B.M. in C.M. 1:4 outside wall,

inside R.C.C. pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc.

comp. incl. Locking arrangement,outlet, inlet, overflow &

wash out pipe arrangement as necessary & C.I.Cover 0.60 x

.045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineer-in-charge.

Underground tank 5000.00 5.46 Litre

SMC SOR 23-24, ITEM NO.-

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

21 for R.C.C. work incl. bending, binding & placing in position 445.00 76.21 Kg.

etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Providing erecting and fixing double coated Syntex / Super /

Reno PVC (ISI) mark water tank of required capacity each

with all necessary fittings & connection etc. complete on

SMC SOR 23-24, ITEM NO.-92

Total amount for water supply and sanitary items

Total amount for water supply and sanitary items

TOTAL FOR PART - ELECTRIC ROOM ,SECURITY CABIN &

RECHARGE BORE WELL

Drilling 300 mm diameter borewell in all types of strata

up to required depth including cost of bentonite

powder, carting rings, cutter, other required materials,

labour charges etc. complete. The drilling shall be done

by mud flushed rotary equipment and bore holes

1 should withstand at least till completion of subsequent 60.00 857.00 R.M

activities like assembly jointing, lowering of casing /

strainer pipes, gravels packing, yield testing etc, complete

up to required depth as shown in drawing and directed

by engineer –in- charge.

Description Qty. Rate Unit Amount

Cleaning of existing unusable / non- working borewell

by applying air compressor of capacity not less than

CFM/200 PSI for minimum one hours or up to the

2 availability of sand free discharge whichever is later 0.50 8415.00 Hr.

including all labour charges and hire charges of

compressor and other equipment etc. complete as

directed by engineer-in- charge.

Excavation for foundation in and all kinds of soil

including leveling and ramming the bottom of trenches

and foundation pits, shoring, strutting, dewatering if

required, slush removing, filling the sides up to

original ground level for rectangular chamber and trench.

(a) 0.00 mt. to 1.50 mt. Depth

Providing and laying Cement Concrete nominal

mix 1:3:6 (1 cement: 3 coarse sand : 6 hand

4 broken stone aggregate 20mm nominal size) and 0.51 3005.76 CM

curing complete including cost of form work as per

drawing in chamber etc. complete.

Providing & laying Fly ash Brick masonry having

crushing strength not less than 35 kg/sq.cm. 1:6 (1 cement:

6 fine sand) with scaffolding, watering, curing etc.

complete with all labours and materials. various area as

directed by Engineer-in- charge.Upto G.L/P.L.

Providing 10mm thick Cement Plaster in single coat on

brick/concrete walls far interior plastering up to Floor two

level and finished even and smooth in cement mortar 1:3(1

cement 3 sand various area as directed by incharge)

Supplying and filling clean best quality of well-

sorted sand having size 1 mm to 2 mm in layer of

required thickness in filter chamber as per drawing and

as directed by Engineer –in- charge.

Supplying and filling clean best quality of well

sorted - " SEVALIYA" sorted pea gravel having size

8 mm to 10 mm in layer of required thickness in 0.30 2029.00 CM

filter chamber as per drawing and as directed by

Engineer –in- charge.

Supplying and filling clean best quality of well-

sorted brick bats having size 50 mm to 150 mm in

layer of required thickness in filter chamber as per

drawing and as directed by Engineer –in- charge.

Supplying and fixing a display board of size 450 mm x

mm or higher, near the recharge system or on outer side of

one wall of filter chamber with letters written“ GROUND

WATER RECHARGE SYSTEM”.

Description Qty. Rate Unit Amount

Supplying and fixing of a cover made up of 2 mm thick

Poly Carbonate sheet on painted Mild Steel square frame

as shown in drawings over filter chamber including all

materials, fittings and labour charges etc, but excluding

11 the cost of Steel frame and steel angle.The fixing of cover 2.14 1510.00 SM

over walls should have arrangement of removing it from

the wall for cleaning of filter chamber and re-fixing again

from time to time as shown in drawing and directed

by engineer – in- charge.

Providing, Supplying, Fixing in bore hole 150 mm dia

Kg/cm2 P.V.C Pipe of approved Quality (Prince,

Supreme,Finolex) with ISI mark, in borewell / filter

12 chamber, including 3.2 mm x 75 mm vertical perforations 40.75 707.00 R.M

with spacing of 4 to 5 mm (or equivalent standard

openings) in necessary lengths and necessary fittings

and as per site situation and as directed by engineer –in-

Supplying and filling clean best quality of well-

sorted " SEVALIYA " pea gravel having size 4 mm to 6 mm

surrounding casing pipe in borewell as per drawing and

as directed by Engineer –in- charge

Providing, fixing and binding SS-304 Hexagonal wire

14 mesh surrounding the perforated casing pipe in filter 0.95 700.00 SM

chamber as directed by Engineer –in- charge.

Providing, supplying and fixing 100 mm dia. 6 kg / cm2

standard PVC pipe with ISI mark, in brick masonary wall

with jali at outside of wall and nylon mesh filter bag

15 100 x 500 mm fitted on inside end of pipe including 4.00 386.00 No.

plumbing, fittings, clamping etc, complete to keep

away debris from surface runoff entering into the filter

chamber as shown in drawing and directed by Engineer

Demolition including stacking of serviceable materials

16 and Disposal of unserviceable materials with lead and lift (a) 0.36 529.72 CM

unreinforced cement concrete

Steel work, welded in built up sections framed

work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In

17 beams and joists, channels angles Tees, flats, with 2.60 9047.86 QUINTAL

connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and directed by Engineering-in-

TOTAL FOR PART - E - RECHARGE BORE WELL

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles

SMC SOR 23-24, COMPUND WALL & OTHER MISC ITEM NO.-

Description Qty. Rate Unit Amount

Excavation for foundation including sorting out and stacking

of useful materials and disposing of the excavated stuff up

to 50 mt. lead and all lift, watering etc. complete.

(A) Loose or soft soil with manual labour

(1) Upto 1.5 Mt. Depth 3.00 203.83 C. M.

SMC SOR 23-24, ITEM NO.-

Providing and laying cement concrete 1:4:8 (1 cement :

3 sand : 8 graded stone aggregates 40 nominal size) and

curing complete including cost of form work in :

(A) Foundation and plinth 3.00 2680.21 C. M.

SMC SOR 23-24, ITEM NO.-

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand

: 4 graded stone agg. 20 mm nominal size) & curing comp.

4 Includ.cost of form work but exclu. Cost of reinforcement 3.00 3637.34 C. M.

for reinforced concrete work in : (A) Foundation, footing,

Base of columns and Mass concrete.

SMC SOR 23-24, ITEM NO.- 95, ITEMS FOR COMPOUND

WALL & OTHER MISC. ITEMS

Providing and laying cement concrete 1:1.5:3 ( 1 cement,

sand, 3 graded stone aggregates 20 mm nominal size ) &

5 curing complete including cost of form work but excluding

cost of reinforcement for reinforced concrete work in:

(A) Foundation, footing, Base of columns and Mass

SMC SOR 23-24, ITEM NO.-

Providing and laying ordinary cement concrete 1:1.5:3 (

cement, 1.5 sand, 3 graded stone aggregates 20 mm

nominal size ) finishing smooth curing etc. complete

including cost of form work but excluding cost of

reinforcement for reinforced concrete (R.C.C.) work in:

(1)Having c/s area up to 0.08 s.mt- Ground Floor 1.00 12632.60 C. M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 2.00 9102.61 C. M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 0.00 7984.42 C. M.

SMC SOR 23-24, ITEM NO.-

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

7 reinforcement for R.C.C. work incl. bending, binding & 1500.00 76.21 Kg

placing in position etc. comp. Upto G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Providing & construction brick work using Fly Ash bricks

having crushingstrength not less than 70 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. Up to G.L./P.L.

SMC SOR 23-24, ITEM NO.-

Filling in trenches with available excavated earth in layer not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering etc.complete.

SMC SOR 23-24, ITEM NO.-

Description Qty. Rate Unit Amount

Providing and filling in plinth with murrum/yellow soil or

10 selected soil in layers of 20 cm. thickness including watering, 5.00 289.06 C. M.

ramming and consolidation etc. complete.

SMC SOR 23-24, ITEM NO.-

Providing and applying 20mm. thick sand faced cement

plaster on walls or similar surfaces at all floor levels

11 consisting of 12 mm. average thick backing coat of C.M.1:3 30.00 330.88 S. M.

(1 cement : 3 sand) and 8 mm. Thick finishing coat of

C.M.1:1 (1 cement : 1 sand) etc. comp.

SMC SOR 23-24, ITEM NO.-

Providing and applying two coats of weathershield max

paint (3 coats may be required in case of darker colours) of

ICI Dulux or Apex Ultima of Asian paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

12 Surface preparation:

Surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, funfi, algae and flaking paint. This can be

achieved by brushing with a wire / stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio 1:3.

For application on previously painted wall, previous coatings

of paint must be thoroughly scraped off and clean the

surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. application of putty is not recommended. 30.00 82.00 S. M.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint.

SMC SOR 23-24, COLOR WORK ITEM NO.-

TOTAL FOR PART - F (COMPOSTING BED)

BENCHES & DUSTBINS

Providing, supplying & placing precast RCC Woodeny

benches as per given specifications. (Seating plank

dimensions : Seating Length of the Bench : 1380 mm,

Seating width of the Bench : 450 mm, Seating height of the

Bench : 450 mm, Seating plank thickness : 60 mm,Total

height of the Bench : 900 mm.)

M-30 grade of Concrete using vibration compaction process.

Benches consists of 2 Nos. L-shape base support in wooden

texture and 1 Nos.flate back and 1 Nos. bottom plank leg

thickness :90 mm, Leg hight : 830mm, Leg width : 600 mm,

backside plank width : 350 mm, backside plank length :

mm, backside plank thickness : 60 mm.

Description Qty. Rate Unit Amount

Bench top and back planks are treated with special

anticorrosive, water proof coating, prevent sun, rain, light

and fungal attack, as to make surfaces glossy and water

The back rest should show as details given by SMC in

embossed at casting time.

SMC SOR 23-24, ITEM NO.-

Providing and fixing Dustbin with M.S. stand at the location

2 including concrete foundation block neede to fix the stand 25.00 4,000.00 No.

as directed by the EIC.

Providing & Fixing heavy duty p.v.c Dustbin with auto hinges

3 and cover as Directed By Engineer in charge.(0.3 cu.mt) 10.00 600.00 No.

Providing and Fixing Hollow steel Sections Framed Work

including Cutting, Hoisting, Welding & Fixing in position

Purlin, Main Chord etc. as per Engineer-in-charge.TATA /

JINDAL / ASIAN Make (M.R.)

SMC SOR 23-24, ITEM NO.-

TOTAL FOR PART - G - BENCHES,DUSTBINS & SCLPTURES

Total Amount of civil works

Total Amount of civil works

PROVIDING, SUPPLYING AND FIXING OF CHILDREN

PLAYING EQUIPMENTS, OUTDOOR PHYSICAL FITNESS

EQUIPMENTS (INCLUDING ONE YEAR FREE MAINTENANCE)

(A) CHILDREN PLAYING EQUIPMENTS, OUTDOOR PHYSICAL

FITNESS EQUIPMENTS

1 Multi Activity Play System -4 0.00 585900.00 No. -

2 Double lane Slide 1.00 92288.14 No.

3 Four seater arc swing 1.00 48127.12 No.

4 Double seater arc swing 1.00 30508.47 No.

5 Circular Swing 1.00 23644.07 No.

6 Animal M.G.R. 1.00 28220.34 No.

7 Platform M.G.R. 1.00 38974.58 No.

8 Dolphin See Saw 1.00 18305.08 No.

9 Multi Seater See-Saw 1.00 16855.93 No.

10 Combination Set 3 in 1 1.00 28296.61 No.

11 Mini Slide 1.00 20502.56 No.

12 Mini Wave Slide 1.00 20855.64 No.

13 Toddler Swing 1.00 24030.25 No.

14 Spring Rider Duck 1.00 10677.97 No.

15 Spring Rider Racer 1.00 15254.24 No.

16 S Loop Climber 1.00 25932.20 No.

17 Sunset Scrambler 1.00 26008.47 No.

TOTAL FOR (A) CHILDREN PLAYING EQUIPMENTS

INTRTNAL ELECTIFICTION WORK

Description Qty. Rate Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

1 concealed in wall/ceiling complete Cat. III

Point wiring for Tissino / Modular secondary light point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC / 6 151.5 PT

wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. cat lll

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single 2 629.23 PR

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC 30 59.59 MTR

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

4 accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC 100 78.78 MTR

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

5 accessories (b) 2 wire 2.5 sq. mm

Description Qty. Rate Unit Amount

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on /

in wall / ceiling as per pipe erected with following type of

accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board.(f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / 6 697.91 PT

in wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured 4 241.39 PT

/metallic/white front plate modules erected on / in wall /

8 ceiling with following type accessories Cat. III

9 Bakelite adopter for Holder to be erected. 20 9.09 EA

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes 20 23.23 MTR

fixed with adhesive solution & Clamps with following dia of

10.00 pipes, in approved manner as directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes 10 32.32 MTR

fixed with adhesive solution & Clamps with following dia of

11.00 pipes, in approved manner as directed.(b) 25 mm

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22-24 Watts, Surge -

12.00 2KV,IP-20, conventional 4 feet Cat-III

Description Qty. Rate Unit Amount

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, 9 112.11 EA

pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (ii) 5 to 8 watts

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

230 volt A.C. 50 Hz 1200 mm sweep complete having

3blades with aluminium blades with , canopy & 30 cm. down

rod erected with earthing.(Make shall be approved by

14 Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 2 108.07 EA

complete erected concealed in Ceiling with necessary

Providing 2.5mm.thick laminated acrylic sheet to cover the

16 fan hook or Fan box.

Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt 3 1366.53 EA

17 lowers & square frame.250mm with 1350 RPM Cat.II

Providing & erecting water cooler having storage capacity

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing 2 46648.87 EA

unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet &

outlet connection. The body of water cooler will be made

18 from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon

filter suitable buster DC pump capacity 80 psi, mention with 2 24394.53 EA

40 psi inline type post carbon filter auto low & high pressure

switches with following size of storage tank & LPH capacity

& erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos

19 booster pump

Sub total Part-01

SWITCHGEAR & DISTRIBUTION BOARD

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Description Qty. Rate Unit Amount

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be 1 35.35 EA

erected in existing box. confirming to IS 8828/1996 with ISI

providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

10 Mark Cat.III

Sub total Part-02

CABLES AND WIRES

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated 60 107.06 MTR

stranded wire of green colour for earth continuity of

following size(A) with medium class Rigid PVC pipe and

1 accessories.(a) 2 wire 4 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated 20 140.39 MTR

stranded wire of green colour for earth continuity of

following size(A) with medium class Rigid PVC pipe and

2 accessories.(b) 2 wire 6 sq. mm

Supplying & erecting Flexible PVC insulated multistrand

multicore 1.1 KV grade ISI marked Copper Wires of following

Size to be erected as directed. e) 1.50 Sq.mm 3 core round

3 PVC sheathed ( street lights )

Description Qty. Rate Unit Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing 530 138.37 MTR

trench / pipe of following size of cables (C) 4 core 10 Sq.

4 mm (For street lights and 3 phase DB)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

5 following size of cables. (B) 2 core 6 Sq. mm (1 ph DB)

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

6 following size of cables.(C) 2 to 4 core 10 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with 120 13.13 EA

brass/cadmium plated nut bolts in an approved manner. (B)

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with 8 6.06 EA

brass/cadmium plated nut bolts in an approved manner. (A)

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)50

10 mm outer dia.

Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable approved 130 146.45 MTR

11 make of following Size. (C) 3 Core x 4 Sq. mm

Providing & laying. R.C.C. Hume pipe for cable to be laid

cm. below ground across the road crossing or on floor with

necessary material in an approved manner and making the

12 ground as per original.(E)150 mm dia

Sub total Part-03

Description Qty. Rate Unit Amount

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner 2 5760.03 EA

chemical (CCM Compound)- Resistivity:- 0.2 • / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retainmoisture for long time Necessary test report must be

submitted.(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent

(b)For Electrical installation up to 11 KV in normal soil.

1 Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag

of 25 Kg and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit 39 368.65 EA

complete with necessary 8 SWG earth wire. - to be used for

2 each Street Light

For using salt and charcoal / coke as required for pipe type

Providing one bag of 25 Kg. Additional Back Filling

4 Compound (BFC) suitable for safe earthing device.

Providing and erecting required size Copper strip for

earthing of H.T. OCB / ACB/ Transformer, LT panel board, 10 794.87 KG

5 Motors etc. using copper clamp.

Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT 10 77.77 KG

6 panel board, Motors etc. using proper clamp.

Sub total Part-04

Providing pair of rubber hand gloves suitable for working on

1 11 KV/22 KV supply.

Providing printed instruction chart both in English and

Gujarati and duly framed with front glasses, for treatment of 2 130.29 EA

2 person suffering from Electric shock

providng and erecting Approved make. energy meter

phase 4 wire unbalanced load 500 V.50A / 100A complete 1 2611.86 EA

3 erected as directed with necessary earth wire. Cat. III

providng and erecting Suitable set of CTS for 100A Energy

Supplying rubber matting of following thickness as per

Description Qty. Rate Unit Amount

Supplying rubber matting of following thickness as per

Sub total Part-05

Providing & erecting open well horizontal mono block pump

set with cast iron body, complete for three phase

submersible motor having [C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm dia

1 delivery pipe

Supplying & erecting approved make motor control cubical

panel [Star delta] made from 16G CRCA sheet duly epoxy

powder painted inside and outside with hinged doors and

locking with suitable size of ON - OFF isolator (AC 3 /

duty) main fuses. Digital volt and current meter (in a single

unit) with micro controller based control unit and current

sensing single phasing preventer electronic overload

protection, over voltage (Programmable) protection and

under voltage (Programmable) protection, prodless dry run 1 7250.79 EA

protection programming facility for setting of all parameter

like overload current, high voltage limit, low voltage limit,

dry run limit with digital indication on seven segment LED

display for any fault like over load, high voltage, low voltage,

dry running single crimped, electronic star delta timer,

feather touch start / stop push buttons to be erected on

angle iron frame. Grouted on wall the contactors will be of

L& T, Siemens, BCH make only) (a) DOL up to 5.0 H.P

Supplying & erecting approved make Automatic liquid level

controller 6A.as per instruction of Engineer in charge on site

complete with wiring connection with existing wires , with

copper conductor from pump to upper and lower tank.(Size

Not less than 1.5 Sq MM) from pump to upper and lower

3 tank with ISI marked Rigid PVC Pipe.

Sub total Part-06

EXTERNAL ELECTRIFICATION

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for 4 8192.11 EA

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement. (D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 59 kg

Description Qty. Rate Unit Amount

Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the

brackets and having spread of 1.5.mtr. length with 110 0 626.2 EA -

deg.with vertical plane & suitable welded stays, reducer and

with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms [A] Single Arm

2 Bracket 1.5 Mtr

Supplying & erecting approved make SMC press moulded

composite FRP . loop-in, loopout approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.(a) 300mm

3.00 x 200mm x 100mm [deep]

Providing and erecting iron clad cable route marker duly

marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with

ground in cement foundation as directed by Engineer in

Supplying and erecting B class Galvanized iron pipe having

smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site

5.00 requirement. Pipe dia as following.(a) 25 mm dia

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 1Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K

to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.CREE /OSRAM / 4 4997.48 EA

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make

LED used for luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection - 4KV integral and 10 kv

non integral ,Light must have 440VAC line supply protection.

It should withstand 48 hours for 440VAC line supply.(e)

6.00 above 48 to 60 Watts Cat-lll

Description Qty. Rate Unit Amount

Supply of approved make frp/grp pole having followiing

specifications :

FRP/GRP pole made by centrifugal moulding process using

thermoset resin polyester/epoxy resin system having

minimum glass content 45.0%.The pole should be in one

pieceand tapered round in shape,having smooth outside

surface finish and should be totally fre from corrosion as

well as non conductive and shock proof. Pole should be

with FRP/GRP base bracket dully fabricated from metal(M.S)

and dully claded with FRP/GRP material to avoid any metal

exposer and painted with PU paint.

Pole should mechanical properties i.e 1. Specfic gravity

(ASTM D 792) 1.3-1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 -55.0%, 3. Water absorption (ASTM D

Pole should be flame retardant as per IS 6746.Resin used

shall be UV resistance and pigmented. Pole should be

painted with first coat of epoxy primer and then two coat of

highly 35 8723.37 EA

weather resistance polyurethen paint to ensure proper

addhesion of the paint.Minimum thickness shall be 80 to

100 micron.Defelection of the pole shall not exceed more

10.0 % of the length of the pole for the given load.Pole

should be generally made as per the dimensional

data,performance criteria and some interchagebility

features of poles

as per the standard ANSI C123.20 latest version of ASTM D

923/01 including cable termination box with necessory

accessories.The size of pole and type of installation with

foundation , Anchor Base & Internal junction box as per the

manufacturer details and site requirement .(1) 'A' class

frp/grp pole suitable for base plate mounting

[B] Overall Length of 4.0 meter, Average thickness : 4mm,

Top/Bottom Outside Dia. 76/143mm +/-2.Weight of Pole

10.0 Kg approx. (Without base) Metal Anchor Base dully frp

claded (Size : 290 Ø * 12mmthk , Mounting hole PCD

240mm * 4 nos. of 16 Ø hole)

Description Qty. Rate Unit Amount

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency 35 4819.72 EA

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (C) Post Top Lantern

LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate,

pipe arrangement for vertical mounting driver and

accessories wired upto terminal block.IP 65 (ii)32-40W Cat-

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum & LCD 1 3168.37 EA

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

9.00 necessary connection erected as directed.

Supply of Fibreglass Platform Step (A Type) Ladder - 18 FT

having following specifications : It should have large fully

serrated platform 15” wide 20” deep which locks ladder

Aluminium feet with thick rubber tread, top rail guard to 1 33895.6 EA

serve as a railing, two pairs of gusset support at the bottom

step and All gussets are heavy duty steel. Capacity : 300 lbs.

Sub total Part-07

TOTAL(PAET-1 TO PART-7)

TOTAL PROJECT COST