PROVN OF STREET LIGHT AND LUMINOUS LIGHTS AT MIL STN GANDHINAGAR

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole, laying of cables etc in soft/loose soil and getting out complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note: Depth after punning shall be measured and paid.

Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

Supply and laying sub class old 'B' burnt bricks, size of brick 230x115x75mm, laid as cable protection cover complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium conductor, 1100 volt grade, of size 10 Sqmm 4 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

Supplying & laying, XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium conductor, 1100 volt grade, of size 10 Sqmm 2 core, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

S&F, GI Octagonal Pole 7.0 Mtr with plate, bolts and single arm decorative bracket complete as specified including pole cap duly painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. Note : (i) Construction of foundation shall be deemed in quoted rate. (ii) Foundation should be as per manufacturer recommendation only.

M&L for horizontal boring by using the trenchless technology under the road at least 60 Cm below the road top, in any type of soil for insertation of GI Pipe of 50mm bore.

S&F, LED type street light fittings, IP-66, 45W, Pressure die cast aluminium housing with toughned glass & individual LEDs with secondary optics complete all as specified and directed by Engineer-in-Charge.

Supply and fixing FRP Box pole mounting box weather proof type of the size 140 x 140 x 90mm with single phase 4 way connector with one 06 amps MCB SP mounted inside complete all as specified and directed.

S&F, LED warm white under ground light 12W, IP-68 water proof buried uplighter ideal for uplighting landscape, façade, columns & features with multiple optics & saturated tones of white complete all as specified and as directed. Note : Cost of Earthwork and PCC will be deemed in quoted rate.)

S&F, 2x3 W LED warm white UP-down luminaire fitting energy saving, environmental friendly with wall surface mounting as light source complete all as specified and as directed.

S&F, LED warm white bollard light 1 x 12W, core cob 90V-260V ideal for uplighting landscape, columns & features complete all as specified and directed. Note : Cost of earthwork and PCC will be deemed in quoted rate.

S&F, LED warm white Garden light 1X8W, COB 90V - 260V ideal for uplighting landscape, columns & features complete all as specified and directed. Note : Cost of earthwork and PCC will be deemed in quoted rate.

S&F, deep recessed antiglare LED 10W downlight including driver for general and accent lighting with premium reflector matches the ceiling and accentuates the architecture suitable for ceiling cutout for round or square complete all as specified and directed.

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision sunken concealed terminal boxes complete all as specified and directed for One light/fan /Exhaust point controlled by one switch.

Supply and laying GI pipe 20mm dia medium grade 12 RM below road/fixed to along the walls as required at site with necessay clamping, including cutting of existing tapping point and gate valve 20mm complete all as specified and directed.

Supply and laying GI pipe40mm dia light grade below road/fixed to along the poles/walls with necessary clamping, including encasing the cable into the pipe all as specified and directed.

M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at a depth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4.0 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead, wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .

Supply, installation, commissoning and testing, Feeder Piller (415 Volts, 50 Hz , 3-phase, 4 wire supply), plinth mounted, factory made, outdoor type, weather and vermin proof (Protection Class IP-54) made out of 40mm x 40mm x 6mm angle iron frame and 3.0 mm thick MS Sheet CRCA sheet powder coated with front & back hinged opening, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel gray paint (First Quality) over a coat of red oxide primer, grouting panel through angle iron, 0.5 mtr in ground and 0.2 mtr over the ground including excavation & earth work in any type of soil and PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete comprising of the followings:- (a) Incoming supply:- (i) Aluminium bus bar chamber 100 amps rating of 04 strip - 01 No (ii) MCCB, 4 pole, AC, 415volts, 100 Amp rating, 16 KA rupturing capacity - 01 No (iii) Indicating lamp Neon type for R-Y-B - 3 Nos, (iv) Panel mounted multifunction meter display of phase to phase rating Phase to nuetral voltage current active power KW, KVAR and KVA, PF frequancy (b) Outgoing supply:- (i) MCCB, TPN, AC, 415volts, 63 Amp rating, 16 KA rupturing capacity - 04 Nos.(ii) Three Phase Digital Timer switch with connected accessories for operation 100 x 60 watt lights.

Supply, installation, commissoning and testing, Feeder Panel board, TPN 415 Volts, 50 Hz , 63 Amps, Aluminium bus bar capacity, out door cubical type floor mounted factory made double door dust and vermin proof fabricated out of CRCA sheet not less than 2.0mm thick fixed on angle iron frame for incoming and outgoing connections including single phase timer switch, contactor for controlling lights with auto/manual switch and all its connected item, one set of indicator lamp R-Y-B with togle switch and with the followings :- (a) Incoming supply : (i) MCB SPN 40 Amps, 240V, 10KA, 'C' curve - 01 No. (b) Outgoing supply : (i) MCB SPN 32 Amps, 240 V, 10KA, 'C' Curve - 01 No (ii) MCB SPN 20 Amps, 240 V, 10 KA, 'C' Curve - 01 No.

Abhishek Enterprises

Ramdev and Sons