REPAIR TO WINDOWS, VENTILATORS, CUPBOARDS, GLASS PANES AND DOORS IN OTM/ MD ACCN AT ZONE A AREA UNDER GE (ARMY) TRIVANDRUM

Amount

Taking down wooden chowkats or frames with shutters exceeding 1.5 sq.m but not exceeding 4 sq.m each (without taking off shutters from the frame) complete all as specified and directed.

Taking down wooden chowkats or frames with shutters not exceeding 1.5 sq.m each (without taking off shutters from the frame) complete all as specified and directed.

Taking down wooden shutters of any description not exceeding 1 sq.m each complete all as specified and directed.

Taking down wooden shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each complete all as specified and directed.

Taking down wooden shutters of any description not exceeding 1 sq.m each and refixing in same opening after carry out necessary repair work including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.

Taking down wooden shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each and refixing in same opening after carry out necessary repair work including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F second class hardwood glazed and skeleton shutters 35mm thickness, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood glazed and skeleton shutters 30 mm thickness, divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc. fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood plain, framed, panelled shutters 35mm thickness (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F PVC ventilator fixed type with solid frame of size 70mm x 45mm including louvers, frosted glass 3mm thickness, including MS guard bars of 10mm dia spacing 150 mm C/C and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with PVC beading including synthetic enamel painting to steel surfaces and taking down the existing ventilator in any description complete all as specified and directed.

Dismantling structural steel work including doors, windows, gates of any size and any description and in any position including cutting of legs etc complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3.00 mm thickness sheet glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.50 sq.m in each pane complete all as specified and directed.

S&F 3.00 mm thickness figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sq.m in each pane complete all as specified and directed.

S&F in repairs worn out wooden pelmet boxes/ cup boards of 18/19 mm thickness prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs worn out wooden pelmet boxes/ cup boards of 12 mm thickness prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel bright finished or electrogalvanized, width of flaps (when open) 40 mm complete all as specified and directed.

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L preparation of new surfaces of steel and iron work of any description over 10 cm width or girth with applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer etc complete all as specified and directed.

S&F mild steel flats as in hold fasts, grills support to windows including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar, depth exceeding half brick but not exceeding one brick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S&F 75mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed.

S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 75mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Taking down of cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10 mm thick cement plaster on fair faces of brick work/concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer complete all as specified and directed.

M&L for cutting existing damaged hinges of steel windows and replacing with new hinges, including necessary welding and painting etc. complete to make steel window shutter operational complete all as specified and directed.

M&L for replacing existing damaged steel window handles including taking down of old handles including all nuts/bolts/welding and painting etc complete all as specified and directed.

M&L for replacing existing damaged stays of steel windows including taking down of existing stays etc complete all as specified and directed.

S&F in repairs 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S&F in repairs 75mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and directed.

S&F in repairs 75mm size aluminium anodised hasp and staple, safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs aluminium alloy, anodised, sliding door bolt length 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, (overall length of cover plate 150mm) fixed in floor complete all as specified and directed.

S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F mild steel window guard bars, plain, let in and fixed independently in wooden frames and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs 20 mm dia stainless steel curtain rod fixing with stainless steel brackets complete all as specified and directed.

S&F in repairs stainless steel 4 levers Mortise lock, vertical type, size 100 mm complete all as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

DJ GROUP

AKASH CONSTRUCTIONS