C/O Community Bhawan Balmiki Bhawan Ward No.7 Palampur road Dharamshala Balance work

Amount

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in flat surfaces such as soffits of suspended floor upto 200mm in thickness including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Beams, cantilever, girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor two level including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work inColumns, pillars, posts and struts Square, rectangular orpolygonal in plan including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Edges of slabs and breaks in floors and walls under 20 cm wide including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying reinfoced cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns pillars posts upto floor two level. and the like including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying reinfoced cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended roofs ,landings their support balconies, beams,girders Floor roofs, landing and shelves and ,bressumers and contilever upto floor two level including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Brick work using common burnt clay building bricks in Super-structure above plinth level upto floor two level (Second Class Bricks). In cement mortar 1:6 ( 1 cement: 6 sand) including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing anodised aluminiumwork for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing ACP pannels in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_ charge glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Providing and laying tor steel reinforcement for RCC work including bending binding and placing in position complete including all lead and lifts and carriage of material as directed by the Engineer-in-charge

Rajesh Thakur