Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹26.2 L+₹92,220.68 (3.64%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L2 | Rejected-Finance Being Not L1 | |
| 3 | L3₹26.5 L+₹1.2 L (4.66%)Rejected-Finance | L3 | Rejected-Finance Being Not L1 |
Tender Value
₹28.1 L
EMD Value
₹56,100
Closing Date
3 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
PROVISION OF SECURITY ROOM TO FACILITATE SMOOTH ENTRY OF PERSONNEL INVOLVED IN CRITICAL PROJECTS AND IMPORTANT REFIT ACTIVITIES AT KAKATIYA GATE AND REPAIR OF PERIMETER WALL NEAR N-4 JETTY AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) (DM) VISAKHAPATN
2023_MES_597483_1
8861/E8
Open Tender
Civil Works
Item Rate
180 days
Naval Dockyard Visakhapatnam
As per tender documents
9 documents required · 9 mandatory
₹500
GE (I) DM Visakhapatnam
₹56,100
Yes
27 Jul 2023
22 May 2023
10 Jul 2023
22 May 2023
3 Jul 2023
19 Jun 2023
Amount
[SCHEDULE 'A' PART-I [B/R WORKS]
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil all as specified and directed.
Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.
Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed.
M&L for sand filling under floor including watering and consolidation complete all as specified and directed.
M&L hard core of broken stone of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.
M&L 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base of floors finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L 75 mm thick cement concrete 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) in floors (plinth protection) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L treating the bottom and sides of excavation at the rate of 5 Ltrs of emulsion per Sqm of surface area complete all as specified and directed.
M&L treating the back fill in contact with foundation at the rate of 7.5 Ltrs of emulsion per Sqm of vertical surface (Area of the substructure in contract with back fill to be measured) complete all as specified and directed.
M&L treating top surface of filled earth at the rate of 5 Ltrs of emulsion per Sqm of surface all as specified and directed.
M&L treating the soil under plinth protection at the rate of 5 Ltr of emulsion per Sqm of surface area all as specified and directed.
M&L treating the soil alongwith external perimeter of building at the rate of 2.25 Ltr of emulsion per mtr of the perimeter wall as specified and directed.
Demolition of cement concrete of any description not exceeding 15cm thick above or below ground floor and removing the debries from the Dockyard premises complete all as specified and directed.
M&L PCC 1:3:6 type C2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L PCC 1:4:8 type D2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L pre-cast reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (using 20 mm graded crushed stone aggregate) as in cover slab of man holes, septic tank etc set in CM 1:4 including necessary forms, moulds etc .complete all as specified and directed.
M&L cement concrete 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in coping, roof kerb, lintel upto 1.5 m span, band or similar work, rounded or chamfered on edges including necessary form work complete all as specified and directed.
M&L RCC (design mix) M-30 (using 20 mm graded crushed stone aggregate) as in foundation, plinth beams, base of column, footing and mass concrete etc. complete all as specified and directed.
M&L RCC (design mix) M-30 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts etc. complete all as specified and directed.
M&L RCC (design mix) M–30 (using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and directed.
M&L RCC (design mix) M-25 (using 20 mm graded crushed stone aggregate) as in slab, supported on walls, beams, columns in floors, roofs, landing, shelves etc. complete all as specified and directed.
Use and waste form work to side of concrete foundation, footings, bases of columns, raft and beams and similar work, vertical or to batter as in rough finished surfaces of concrete all as specified and directed.
Use and waste of form work to sides of pillars, posts, struts, piers, columns etc. square, rectangular or polygonal section as in fair finished surfaces complete all as specified and directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing or similar work not. exc. 200 mm thick horizontal or sloping complete all as specified and directed as in fair finished surfaces.
Use and waste of form work to sides and soffits of floor or roof beams, lintels, over 1.5 m span, cantilevers, shelves including supports, overhangs etc. complete all as specified and directed as in flat and fair finished surfaces complete all as specified and directed.
M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified and directed.
M&L M.S. TMT bars 5 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete all as specified and directed.
M&L 40 mm thick damp proof course in cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate mixed with WPC @ 3% by weight of cement to horizontal or vertical surfaces including necessary form work complete all as specified and directed. ( Note : Cost of WPC is included in quoted rates).
Material & Labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 15 mm thick in 1:6 complete all as specified and as directed.
Material & Labour for coloured glazed ceramic tiles (300 x 450) x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over & including rendering in CM 1:3, 10 mm thick complete all as specified and as directed.
M&L Vitrified Ceramic tiles of light shade 10mm thick (Square or Rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors, set and Jointed in neat cement slurry and pointed in coloured cement to match the tiles, complete laid over and including cement screed 15 mm thick in 1:6 complete all as specified and as directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
M&L for Pre cast cement concrete type 1:3:6 type C-2 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.
M&L rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement.
M&L rendering 10 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement.
M&L rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement.
M & L preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer over a coat of wall putty minimun thickness 1.5mm and cutting to smooth surfaces by sand paper complete all as specified and directed.
M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over a coat of wall putty minimun thickness 1.5mm and cutting to smooth surfaces by sand paper complete all as specified and directed.
M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over a coat of wall putty minimun thickness 1.5mm and cutting to smooth surfaces by sand paper complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying three coats of white washing complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed
S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178 of SSR Part -II complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 174 of SSR Part -II complete all as specified and directed.
S&F Stainless Steel butt hinges medium weight of size 75 mm size complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F Extruded aluminium alloy handles 125 mm long fabricated type anodised complete all as specified and directed .
Providing and fixing factory made UPVC white colour sliding window exceeding 2.00 Sqm .Three tack made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash (42mmx67mm). Sliding mesh sash (42mmx57mm) sliding interlock (One vertical length in each shutters) (45.5mmx28mm, Glzing bead (24.5mmx16mm) will be mitred cut and fusionwelded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2+, -0.2mm thick galvanised steel frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm), sliding mesh sash(26mmx10mm) profile to be inserted in required profile,frame will be fixed to the wall with 8 mmx100mm long fasteners, Hardware (touch lock of zinc alloyed (white powder coated), steel roller system. Stainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aprature 1.40mm and required accessories. Note :- The unit rate quoted by contractor shall excludes the cost of glass but includes all other connected accessories. Net opening will be measured for payment purpose.
S&F sheet glass 4.0 mm thick ordinary quality fixed with aluminium beads in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
Supply & Fix power coated Aluminium window frame 3 track outer frame 92 mm x 31.75 mm x1.50 mm and guide rail of section Nos size 92 x 31.75 x1.50mm and shutter section 40 x 18 x 1.550 mm sliding type including necessary jointing cleats, glazing clips, rubber packing handles and anodised aluminium snab beading screws etc., complete all as specified and as directed Note : Glass & fly proof mesh shall be measured and paid seperately under respective items in this schedule
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.
S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 150 mm long and 1 No brass mortice lock of 6 lever with key in duplicate. Shutter shall be partly glazed with 5 mm thick sheet glass ordianry quality and partly panelled with 12mm thick particle board, pre-laminated interior grade, prelaminated one side with decorative choice lamination, on other side balancing light grey lamination fixed with glazing clips, rubber beadings and aluminium beadings complete all as specified and directed. Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx) Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx) Bottom rail: 150.00 x 2.20mm thick (2.376 Kg/RM appx) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx)
S&F aluminium composite panel of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polythene core with PVDF coating of 30 micron, face fully covered with high intensity prismatic (Type-IV) sheeting conforming to type-III of ASTM-D 4956-01 as approved by GE and fixing the same to the structural /wooden/aluminum frame work by means of suitable self tapping screws, rivets or bolts and nuts and erecting in position complete all as specified and directed.
S&F 12 mm thick toughned glass as in wall and doors including all rubber gascut / beading and all necessary aluminum framing fittngs complete all as specfied and directed.
Dismantling wrought iron or MS work of any description not otherwise provided, complete all as specified and directed.
S&F mild steel work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F M.S. framed work such as grills gratings etc with end of bars shouldered/or riveted or forged into spikes framed guard bar, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar works steel quality conforming to Fe-290, Grade E- 165 complete all as specified directed .
M&L MS rolled section of grade Fe-410-W (Gde - E-250), quality - A (beam, tee, angle channel or flat sections) as in roof trusses (framed), trussed purlins, crane gantries rails, and fastening and heavy bracket framing including distance pieces, cleats etc. complete all as specified and directed.
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.
M&L for providing and fnixing 610mm dia concerntina coil in fencing with all the required clips, pins etc as per manufacurer's specification fixed on the angle iron framed bracket/post. Each concerntina coil shall be fixed to MS Angle with existing rows of barbed wire, on each of bracket. the coil shall be with HTGE spring core wire of diameter 2.59mm, pitch between the barb shall be 24.5mm, tape shall be hot dip galvanised upto 20 microns, weight of each coil shall be 7.5 to 8.00 kg, tape shell be 0.5mm thick, tensile strength shall be not less than 1600n/mm2, minimum number of spiral turns per coil is minimum 50 short bladed profile of minimum blade length 11mm and width before crmping is 18mm mimumum including dovetail clips @ clips per 2 spirals turns approx 125 clips per coil complete all as specified and as per manufacturer's instructions.
M&L water proofing treatment on cleaned RCC roof comprises with the following operation as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 mixed with liquid water proofing compound @ 3% by weight of cement & finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) After drying the surface, apply bitumen primer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps over the plastered surface @ 0.40 Ltr / Sqm. The manufacturer of primer shall be the same membrane manufacturer (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.
M&L water proofing treatment on vertical surfaces like. parapet walls etc. comprises with the following operation as specified here-in-below :- (a) 15 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 mixed with liquid water proofing compound @ 3% by weight of cement & finishing the plastered surfaces even and smooth over cleaned surfaces. The plastered surface shall be cured properly for ten days . (b) After drying the surface, apply bitumen primer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps over the plastered surface @ 0.40 Ltr / Sqm. The manufacturer of primer shall be the same membrane manufacturer (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. Primer & the membrane shall be inserted in the groove & the groove shall be sealed with cement mortar 1:3 mixed with liquid water proofing compound @ 3% by weight of cement (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.
M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified & directed
M&L PCC 1:3:6 type C2 (using 40 mm graded stone, aggregate) as in concrete bed to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for 200 mm dia SWG pipe all as specified and directed.
M&L salt glazed stoneware drain pipe 150 mm dia grade 'A' laid in trenches and jointed as specified.
M&L for cutting existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4, type B1, smooth finished and re-forming benching as required complete all as directed for 200 mm dia pipe.
M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.
S & F soap dish of chromium plated of 125 mm size fixed to wall with plug & chromium plated brass screw complete
S&F 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed
S&F 32 mm dia (outer diameter of the pipe) Unplasticised PVC pipe of pressure rating 10 Kgf/ sqcm with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed
S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity all as specified in SSR and as directed.
S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement complete all as specified and directed
S&F vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including S&F PVC seat cover for pedestal pan complete all as specified and directed
S&F vitreous China urinals, half stall type white, (excluding flushing cistern and flush pipe ) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. complete all as specified and directed
S&F Urinal spreader of chromium plated push type with PVC pipe for fixing with 15 mm dia pipe complete all as specified and directed
S & F Vitreous China urinal partition white of size 310x700mm complete all as specified and as directed.
S&F angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed
S&F 15 mm dia pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed
S&F 15 mm dia bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe of for brass ferrule complete all as directed.
Supply & Fix health faucet 15 mm bore brass chromium plated jet spray with CP pipe of 1400 mm long and connector complete all as specified and as directed
S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed
S&F 20 mm dia (outer diameter of the pipe) Unplasticised PVC pipe of pressure rating 10 Kgf/ sqcm with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed (Note : Pipe shall be fixed in concealed work)
S&F 25 mm dia (outer diameter of the pipe) Unplasticised PVC pipe of pressure rating 10 Kgf/ sqcm with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed
S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed
S&F 75 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed
S&F 110 mm bore PVC (SWR) bends (any radius) with oval access door complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends (any radius) with oval access door complete all as specified and directed.
S&F PVC (SWR) floor trap, 75 mm dia, plain with brass CP grating including jointing with solvent cement fixed complete all as specified and directed
Supply & fix brass ball valve 15 mm dia high pressure with polythene float and flynut complete all as specified and as directed
S&F 20 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed in position complete all as specified and as directed.
M&L forcutting existing steeltubing for alterations or additions, screwing existing steel tubing for alterations or additions in position without taking down complete all as specified and as directed for 20 mm dia pipe.
[SCHEDULE 'A' PART-II [E/M WORKS]
M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of galvanised pressed mild steel Modular Terminal Boxes of suitable size as requires for fixing modular switch / sockets/ regulator etc. complete for one light / Fan / bazzer point controlled by one one way switches complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..
M&L concealed point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of galvanised pressed mild steel Modular Terminal Boxes of suitable size as requires for fixing modular switch / sockets complete for one 3 pin 5/6 Amp socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..
M&L concealed point wiring with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FRLS copper conductor cable drawn through with and including PVC rigid conduit medium grade with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core copper cable as earth continuity wire connecting to common earth point including supply & fixing of galvanised pressed mild steel Modular Terminal Boxes of suitable size as requires for fixing modular switch / sockets complete for one 6 pin, 16 Amp socket outlet on independent board complete all as specified and directed including necessary chase cutting for conduits and sinking boxes and making good to walls, floors etc.complete all as specified and directed..
S&F modular switch 6 Amps ,240 volts single pole one way single module conforming to IS complete all as specified and as directed
S&F modular socket outlet 2 in 1,3 pin 5 amp, 240V two modules conforming to IS complete all as specified and as directed.
S&F modular switch socket combination 16 Amps 6 pin 240 volts 3 modules conforming to IS complete all as specified and as directed
S&F modular cover plate& support plate for 10 module complete all as specified and as directed
S&F modular electronic fan regulator 2 MODULE ,120 W, conforming to IS complete all as specified and as directed
M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed.
Supply & fix LED batten with CRCA body,pre coated with white and prewired suitable for LED tube 2x18/20 watt 4'long alongwith 2 number of tube including connection with suitable 3 core wire from ceiling rose to fitting terminal with necessary fixing arrangement complete all as specified and directed. Make: Bajaj Cat Part No BLRBDB-218 and BLRB20CW LEDor equivalent in Havells/ Crompton/ Philips
S&F exhaust fans AC single phase 230/240V of size 300mm sweep with louver complete including connection with suitable 3 core wire from ceiling rose to fitting terminal with necessary fixing arrangement complete all as specified and directed, Note: Cutting hole and making good the disturbed surface is e included in the quoted rate
Supply and fixing ceiling fans (white colour) complete with 3 nos. blades, down rod, and other accessories, 230 V, 1200 mm sweep. min air delivery 210 CFM with service value 6.00 BEE, five star rated, brushless direct current motor (BLDC) with remote including connection with suitable 3 core wire from ceiling rose to fitting terminal with necessary fixing arrangement complete all as specified and directed, Make Havells/Bajaj/Crompton
S&F MCB SP 6 to 32 Amps C Curve complete all as specified and directed
S&F MCB SPN 6 to 32 Amps C Curve complete all as specified and directed
S&F MCB TP 63 Amps C Curve complete all as specified and directed.
S&F MCB TPN 63 Amps C Curve complete as directed
S&F concealled TPN DB 4 way, double door, with 200 amp rated bus bar complete all as specified and as directed Note:Cutting chases for DB &making good is be included in the quoted rate
S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way with 200 amps rated bus bar all as specified and directed.
M&L Sub main wiring concealed type with two runs of 6.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through PVC rigid conduit with all fittings and accessories of PVC rigid conduit complete fixed to wall / ceiling etc incl one run of 6.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed. including taking out old one. (Note :-(i) PVC rigid conduit with all fittings/accessories shall be measured and paid separately. (ii) Two runs of 6.0 sqmm single core cable, one run of 6.0 sqmm earth continuity wire to be measured as one length (iii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.).
M&L Sub main wiring concealed type with four runs of 10.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through PVC rigid conduit with all fittings and accessories of PVC rigid conduit complete fixed to wall / ceiling etc incl two run of 10.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed. including taking out old one. (Note :-(i) PVC rigid conduit with all fittings/accessories shall be measured and paid separately. (ii) Four runs of 10.0 sqmm single core cable, Two run of 10.0 sqmm earth continuity wire to be measured as one length (iii) chase cutting if required shall be measured and paid separately under relevant items in this schedule.).
Supply & fixing 20 mm dia medium grade PVC rigid conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) including taking down old one complete all as specified and directed.
Supply & fixing 25 mm dia medium grade PVC rigid conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) including taking down old one complete all as specified and directed.
M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc. in brick walls and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth complete all as specified & directed.
Supply and fix 220V AC, 50HZ, single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps complete all as specified & directed.
M&L for energy efficient 40 W LED street / bldg. security light luminaire for road lighting with pressure die-cast aluminium IP66 protection and high power LED as light source with acrylic cover including supply & fixing with 40 mm dia medium grade GI pipe bracket 1.5 mtr long bent to shape, mounted on wall / pole with suitable clamps, bolts, nuts and all accessories complete including connection with 3 core PVC insulated sheathed flexible cable with muyltistranded copper conductor from celing rose to fitting terminal all as specified and as directed
M & L earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected with 4mm dia GI wire by means of bolts washers and protected by 15mm bore, medium grade GI pipe, funnel with 20mm bore GI medium grade watering pipe, wire mesh, copper lugs including concrete pit in PCC 1:3:6 type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350X350X50 mm, reinforced with 8mm dia deformed bars @15 cm C/C both direction and 10mm MS handle of suitable size, charcoal or coke and salt in alternate layers, necessary earth work in soft/loose soil, all as shown in Electrical Plate No 3 of MES Schedule Part-I and testing, complete all as specified and as directed.
RAGHU RAMA PANDA
SREE HANUMAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .