ADDN ALTN OF FALSE CEILING WITH ELECTRIC FITTINGS ROOF SHEET OF BLDG NO PRR 215 OF HQ 787 I AD BDE SIG COY AND CERTAIN MINOR WORKS UNDER AGE BR EAST AT GE DEHU ROAD

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

soft / Loose soil

Hard/Demse soil

Excavating over areas, n exc 1.5 m deep and getting out Hard / dense soil

Item no 3 above but additional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out hard Rock

M & L for Cement concrete type D2 (1:4:8) using 40mm graded stone aggregate in foundations, filling and mass concrete.

M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound (WPC)

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for 10 mm thick rendering in cement mortar 1:6 on concrete block masonry finishing even and smooth without using extra cement .complete all as specified and as directed by engr-in-charge.

M&L for hardcore of guge n exc .63 mm, deposited, spread and levelled in layers n exc. 15 cm thick waterd and rammed t a true surface complete all as specified and as directed by engr-in-charge.

M&L for 75mm thick P.C.C (1:4:8) type D-2 in sub base of floor complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface without using extra cement.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over & including 15 mm thick screed bed in CM (1:6) as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic coloured tiles of size 300 mm X 450 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. With 10mm thick Backing coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge.

Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point.

M & L for Reinforce cement concrete 1:2:4 Type B1 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.

M & L for Reinforce cement concrete 1:2:4 Type B1 (20 mm graded aggregate) in chajja complete all as specified and directed.

M & L for Reinforce cement concrete 1:2:4 Type B1 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for Formwork to slab, chullah hoods, chajjas, troughs and similar items in?cluding edges

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thick PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge.

M & L For Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick for ridge of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S & F Anodised Alu. snap grid (605x605)mm frame wk for false ceiling , providing M&L 9mm thick Acoustical board/tiles for insulation and accoustic purposes, (60x60) cm in size, fixed in ceiling with screws to frame work or with staples on snap grid, hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 X 3) mm size 60 mm long complete all as specied and as directed.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified and as directed.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 150 mm .complete & all as directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 100 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe.

S&F 15 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

S & F Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed.

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S & F Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) Complete all as specified.

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.

Supply & fixing 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge.

S&F Brass Chromium plated shower rose in repairs of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F waste coupling of PTMT of 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) Complete.

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engr-in-Charge

S&F Cromium Plated floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S&F in repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors

S & F 75 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal

S & F PVC (SWR) 110 mm bore vent cowl

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for 50 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agg in sub base of floor.complete all as specified and as directed by engr-in-charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified.

Ditto above ser No 76 but on skirting over 10 mm th backing coat in CM 1:4 complete all as specified and as directed.

M&L PCC (1:3:6) type C-1 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement.complete all as specified and as directed by engr-in-charge.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

M&L PCC (1:3:6) type C-1 using 20mm graded stone agg filling of pressed steel door frame complete all as specified and as directed by engr-in-charge.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed,100mm long etc complete all as specified

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S&F 125 mm long MS butt hinges medium weight cold rdlled.

S&F butt hinges 0f 75mm size medium weight cold rolled mild steel and fixed to frame etc complete all as specified

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100mm extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified

M & L for preparation and applying two coat of synthetic enamel paint on wooden surface over one coat of pink primer complete all as specified and directed.

S & F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F 4 mm Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and as directed.

M & L for cement concrete 1:3:6 Type C1 (20 mm graded aggregate) in coping complete all as specified and as directed.

M&L for 100 mm thick cement concrete (1:2:4) Type B-2 (using 40mm graded stone aggregate)100 mm thick in floor and courtyard, finished cement surfaces even and smooth without using extra cement complete all as specified

M&L for Machine cut cudappah stone slab 20-25mm thick over & including cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Material and labour for 20-25mm thick granite (of any type or any colour) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in (cement mortar 1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite moulding slab complete all as specified and as directed.

M&L for Marble of any colour 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in (Cement Mortar 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade including Full round moulding slab complete all as specified.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar (1:6) as in floors complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base and mass concrete complete all as specified and as directed.

M&L for precast cement concrete glazed interlocking tiles,paver block, any shape and size as approved ,60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid over 50 mm thick sand cushioning .laid dry to the profile including vibrating with surface vibrator after laying of tiles all as specified and as directed. NOTE: Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.

M&L for fillet in any position and to any shape in cement mortar 1:4 exc 25 Sqcm and nexc 50 Sqcm complete all as specified.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

M &L for MS work as in wind tie or any other work including cutting, drilling holes etc.

M&L for preparation of old painted surfaces of Steel and Steel materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified by Engr-in-Charge

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete.

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified.

M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed base in CM 1:6, 15 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and grinding polishing mirror finish complete.

M&l Complete removal of existing treatment of painted surfaces and priming with alkalie resistant priming paint & applying two coats of oil emulsion distemper on wall including preparation complete all as specified & as directed.

M & L complete removal of existing treatment of painted surfaces applying two coats of cement paint over a coat of alkali resistant priming paint complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

M&L for brick work with sub class B bricks in CM 1:6 , straight or curved on plan exc 6m mean radius , old size bricks complete all as specified.

M&L for brick work with sub class B half brick works in CM 1:6 , straight or curved on plan in any mean radius , old size bricks complete all as specified.

M&L for providing pre cast cement concrete (1:2:4) type B1,(using 20mm graded aggregate) set in CM 1:6 in cover slab (for manholes), chullah hoods, chajjas, water troughs, shelves and similar articles etc complete all as specified

M&L for three coat of white wash of wall on new plastered surface including preparation etc complete all as specified

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc complete all as specified

M&L for plain, framed, 1st class hard wood panelled shutters 35mm thick ( any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supply and fixed to chowkats, etc complete all as specified

M&L for 1st class hard wood, 30mm thick glazed and skeleton window/ventilator shutters, open rebated and prepared to receive glass, gauze, etc , divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified

M&L for rolled mild steel in roof tublar trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing or of (beam , tee, angle, channel or flat sections) including distance pieces, cleats complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St 240, and one shop cat of zinc chromate primer paint , complete all as specified

M&L bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if rquired hooks(stay), heavy, for large gates , hold fasts, wall ties hooks for hanging fans plain angle cleats for securing purlins to wood/iron trushes or rafters, two way and three way straps , plate washers and similar shall articles conforming to fe-290 gde-e-165 all as specified

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washerw and one hexagonal or square nut , n exc 5 cm long diameter of neck in 5 to 15mm all as specified

S&F grating round 140mm size of PTMT (minimum weight 50gms) all as specified

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistern & flush pipe all as specified

S&F cast iron floor/Nahani trap including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified

M&L for concrete bed to drain pipes cement concrete 1:3:6 type C2, including packing under and completely surrounding pipes with concrete after they are laid and tested in 100mm dia pipe all as specified

M&L for concrete bed to drain pipes cement concrete 1:3:6 type C2, including packing under and completely surrounding pipes with concrete after they are laid and tested in 150mm dia pipe all as specified

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded course agg) as in sub base of floor complete all as specified

M&L for providing cement concrete in side kerb of pavement, path etc all as specified

M&L for cement concrete 1:2:4 type B2 (using 40mm graded agg) in surface channels and drain complete all as specified

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc all as specified

E&M Portion

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge

16 Sqmm x 2 core

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the outer dia 40 mm dia. Make:-Infra/Supreme/Prince

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws :-

One light point controlled by one switch

One fan point controlled by one switch

One socket 5 pin 5 Amps flush type on independent board

One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 2.5 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 2.5 sqmm cable and one run of PVC casing capping will be measured as one RM).

S&F switch piano flush type single pole one way 5 Amps

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

S&F MCB SP 240 volts 6-32 Amps

S&F isolator SPN 40 Amps 240 volts

Supply and fix in repair LED Fitting 18 Watts LED MODEL:LHEXBQP71NWO18 MAKE :Havells or Equivalent

Supply and fix in repair LED Fitting 9 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm MODEL:LHEXBLP7IN1W009 MAKE :Havells or Equivalent in Philips/Bajaj/HPL

S&F in repair LED Security Light fitting of 25 W, Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65 for 1Wx18 Nos LEDs and Driver all as specified & Directed. Make : ENDURAPEARLS25WLED757SASYTOPC of Havells or equivalent inPhilips/ Bajaj/ CG/Luker

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40/25mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers all as specified and directed by Engr in charge.

Supply and Lay pipe galvanised Medium class including fitting complete 40 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia

Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia

Supply and fix gate valve stop screwed 20 mm

M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site. Note: Earthwork will be measured and paid separately

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

Supply & fixing in replacement of LED Recess mounted/POP mounted down luminair 42 watts Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for grid ceiling complete with electronic driver suitable for ceiling cut size 595x595x65 mm or 2x2 feet all as specified. CG Cat no LCTLRN-36-FO-CDL, Havells cat no- VENUSNEOHE2X2PLR18-42WLED830MOD

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make :- Havells/Bajaj/Crompton